Sharper Image SI-470 User manual

MODEL
SI-470
CANISTER GARMENT STEAMER
OWNER’S GUIDE

3
English
Important Safety Instructions..............................................................................................................................................................4
Product Information.....................................................................................................................................................................................6
Assembly................................................................................................................................................................................................................8
Filling Water Tank.........................................................................................................................................................................................10
Fabric Steaming ..........................................................................................................................................................................................11
Storage & Care..............................................................................................................................................................................................12
Troubleshooting ...........................................................................................................................................................................................13
Warranty..............................................................................................................................................................................................................14
CONTENTS

4English
IMPORTANT SAFETY INSTRUCTIONS
This owner’s guide and any additional inserts are considered part of the product.
They contain important information about safety, use and disposal. Before using
the product, please familiarize yourself with all operating and safety instructions.
Please keep all documents for future reference and pass these documents on,
together with the product, to any future owner. See sihomecomfort.com to view,
download and print the most current version of these instructions.
INTENDED USE: This product is intended to be used indoors for garment steaming
in the United States and/or Canada. This product is not intended for commercial
or industrial use. The manufacturer assumes no responsibility for damage or injury
due to unauthorized use or product modification. Failure to follow these directions
will void the product warranty.
WARNING: Risk to Children and Impaired Persons
- Supervision is required during the installation, operation, cleaning and
maintenance of this product by children age 12 years and younger and
anyone with reduced physical, sensory or mental capabilities. Children should
be supervised to ensure that they do not play with the appliance, its parts and
packaging material.
Directions to reduce risk of fire, electrical shock, and injury:
- Read all instructions before use.
- Use caution when handling this steam unit. Burns could occur from touching
hot metal parts, hot water, or steam. Use special care to avoid contact with hot
water when tipping unit on its side or removing drain plug to empty the reservoir.
- To reduce the risk of contact with hot water, test whether steam is ready before
each use while carefully holding the product away from your body. If no steam
appears, wait a few more minutes and test again. Do not look into the appliance,
use your hands or other objects to check for steam.
- During use, hot water may leak out Drain Knob if not placed in locked position.
- Do not attempt to use steam function without filling Water Tank.
- Do not leave appliance unattended while connected.
- To reduce the risk of electric shock, do not immerse the appliance in water or
other liquids.
- Always disconnect appliance from electrical outlet when filling with water or
emptying, and when not in use.
- Do not allow cord to touch hot surfaces. Let appliance cool completely before
putting away. Loop cord loosely around appliance when storing.
- Always allow unit to cool (15 minutes for complete cooling) and empty Water
Tank before storing.
- Allow unit to cool at least 15 minutes before disconnecting hose and before
unlocking Drain Knob.

5
English
- Never yank cord to disconnect from outlet. Instead, grasp just the plug and pull
to disconnect.
- Do not use power cord as handle, allow it to hang over edge of counters, or be
crimped or closed in doors.
- Do not operate appliance with a damaged cord, or if the appliance has been
dropped or damaged. To reduce the risk of electric shock, do not disassemble
or attempt to repair the appliance. All repairs must be performed by a qualified
service professional. Incorrect reassembly or repair could cause a risk of fire,
electric shock, or injury when the appliance is used.
- A loose fit between wall outlet (receptacle) and plug may cause overheating
and distortion of the plug. Discontinue use of the product in this outlet. Contact a
qualified electrician to replace loose or worn outlets.
- Before plugging power cord into electrical outlet, be sure that all electrical
information on rating label agrees with your power supply.
- To reduce the likelihood of circuit overload, do not operate another high
wattage appliance on the same circuit.
- Do not use an extension cord or power strip to operate this unit. Only plug power
cord directly into 120V outlet.
- This appliance has a polarized plug (one blade is wider than the other.) To
reduce the risk of electrical shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician. Do not attempt to defeat this
safety feature.
- Do not sit or stand on unit.
- Do not set anything on top of unit during use.
WARNING: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Please refer to our website for the most current version of our owner’s guide.
SAVE THESE INSTRUCTIONS

6English
7A
UNIT FEATURES
1
2
3
4
5
6
7
7A
8
9
10
Steam Nozzle
Nozzle Cradle and Clothes Hanger
Handle/Grip
Hose
Telescopic Pole
Steam Knob
Water Tank
Water Tank Cap (Internal)
Water Tank Handle
Water Level Window
Drain Plug
The following features are included with your product. Carefully inspect the
packing material for all parts listed below. To obtain possible missing parts, contact
(833.800.8669) or ([e-mail]).
PRODUCT INFORMATION
12
3
4
5
6
8
7
9
10

7
English
The Steam Nozzle emits the flow of hot, penetrating steam produced by the
Water Tank.
The Nozzle Cradle and Clothes Hanger provides a safe and convenient
place to hang the steam nozzle when not in use and is designed to support
garments hung from a clean rust-free hanger for easy, accessible steaming.
The Handle is designed to stay cool while providing maximum grip and
comfort.
The Hose directs steam flow from the main unit to the Steam Nozzle.
The Telescopic Pole connects to the main unit at the Pole Base. The
Telescopic Pole is divided into four sections, three of which can be extended
and lowered to a variety of heights for optimal user comfort and convenient
storage.
The Steam Knob powers the unit on and off.
The Water Tank is the container that holds water to be transferred into the
Water Reservoir. The Water Tank is removeable for convenient filling, up to a
maximum capacity of 54 oz (1597ml). The Water Tank Cap (7A) is designed
to safely contain steam inside the Water Tank, while providing easy access to
the Water Tank’s fill hole.
The Water Tank Handle allows for convenient removal and grip when filling
the tank. This handle is not meant to be used to move the Canister Garment
Steamer.
The Water Level Window permits a clear view of the water level inside the
Water Tank, and is marked to indicate the maximum water level for easy
filling.
The Drain Plug is opened to easily empty the Water Reservoir of any
remaining water. Use caution and allow the unit to cool before removing the
plug.
1
2
3
4
5
6
7
8
9
10

8English
CONNECTING TELESCOPIC POLE
The telescopic pole is made up of four sections:
SECTIONS 1, 2 & 3 are adjustable in length. By using the three extension locks,
these sections may be extended or retracted in order to achieve the desired
length.
1. Look down inside Pole Base, and locate two guide ridges. Align two guide
grooves on Telescopic Pole with guide ridges inside Pole Base.
2. With guide grooves aligned with guide ridges, insert SECTION 4 of Telescopic
Pole into Pole Base. Telescopic Pole should now be secured to the Pole Base.
NOTE: If you have trouble locating two guide ridges inside Pole Base, insert
SECTION 4 of Telescopic Pole into Pole Base, then twist Pole to properly align the
guide grooves and guide ridges.
CONNECTING HOSE
1. Align arrow on Hose with unlock icon on unit.
2. Press hose down and turn until arrow is aligned with lock icon to lock hose into
place.
NOTE: Do not operate unit if Hose is not in locked position
CONNECTING NOZZLE CRADLE AND CLOTHES HANGER
1. Look down inside Pole Base, and locate two guide ridges. Align two guide
grooves on Telescopic Pole with guide ridges inside Pole Base.
2. Align Nozzle Cradle and Clothes Hanger guide ridges with guide grooves on
SECTION 1 of Telescopic Pole. Be sure to orient Nozzle Cradle and Clothes
Hanger so that the Nozzle Cradle faces toward front of unit. This will help to
improve unit stability when heavy garments are hung from the Clothes Hanger.
3. Slide Nozzle Cradle and Clothes Hanger onto SECTION 1 of Telescopic Pole.
Press down firmly until it fits securely in place.
ASSEMBLY
SECTION 1
(TOP)
SECTION 2
(MIDDLE-TOP)
SECTION 3
(MIDDLE-BOTTOM) COUPLING
SECTION 4
(BOTTOM)

9
English
NOTE: If you have trouble locating two guide ridges inside Pole Base, insert
SECTION 4 of Telescopic Pole into Pole Base, then twist Pole to properly align the
guide grooves and guide ridges.
ADJUSTING TELESCOPIC POLE
1. Release extension lock directly below SECTION 1 by
swinging hinge outward as shown. SECTION 1 can then be
extended / retracted.
2. Once SECTION 1 is at desired length, close hinge to once
again secure extension lock.
3. Repeat STEPS 1 & 2 for SECTIONS 2 & 3 of the Telescopic
Pole, using the extension lock directly below each of those
sections.

10 English
1. Remove Water Tank from main unit.
2. Hold Water Tank upside-down.
3. Remove Water Tank Cap by rotating it in a counter- clockwise direction.
NOTE: In order to minimize potential mineral build-up and prolong the life of your
steamer, distilled or de-mineralized water is recommended.
4. Replace Water Tank Cap by rotating it in a clockwise direction.
NOTE: Place Drain Knob in locked position before replacing Water Tank and
operating unit.
5. Place Water Tank back onto main unit. The sound of water flowing from Water
Tank into Water Reservoir should be audible for a short period of time
NOTE: Water Tank can be removed and refilled at any time during operation –
there is no need to turn unit off or allow any cooling period.
IMPORTANT: Do not attempt to operate unit with an empty Water Tank.
FILLING WATER TANK
CAUTION: Only water should be used in unit – other chemicals or cleaning
agents may cause internal damage. Do not attempt to substitute any other
water tank for the one designed for use with this unit.
CAUTION: IF UNIT TIPS OVER WHILE TURNED ON AND PRODUCING STEAM, IT
WILL CONTINUE TO PRODUCE STEAM. USE CAUTION WHEN PICKING UNIT UP.

11
English
CAUTION: When steaming any material for the first time, it is recommended that
you test on a small inconspicuous area before proceeding. Do not use on synthetic
fabrics such as 100% nylon or polyester, or other steam-sensitive materials.
NOTE: Be sure the Reservoir has already been filled before following these steps.
1. Plug power cord into a standard electrical outlet. Turn Steam Knob to “ON”
position.
2. After approximately 1 minute, steam will begin emitting from Steam Nozzle.
3. Direct Steam Nozzle towards fabric material you wish to steam. See below for
additional tips and procedures.
STEAMING GARMENTS
- Hang garment from a clean, rust-free hanger.
- Direct Steam Nozzle towards bottom of garment. Steam will rise along inside
and outside of material, removing wrinkles. Slowly slide Steam Nozzle upward
from bottom to top of garment.
- Direct Steam Nozzle away from garment and smooth material with your free
hand.
- Repeat as necessary until garment is fresh and wrinkle-free.
GENERAL STEAMING TIPS
- For most effective results, hold Steam Nozzle within 1/2” of fabrics, or press it
directly against surfaces.
- Curtains and draperies can be steamed while still hanging.
- To remove wrinkles from towels, handkerchiefs and napkins, drape them over a
rod or towel rack and gently steam them.
- Heavier fabrics may require repeated steaming to achieve desired results.
- To remove exceptionally stubborn wrinkles, steam both sides of fabric.
- Be especially careful when steaming any delicate fabrics that may be
damaged by heat or water spotting.
- To sanitize a fabric, hold Steam Nozzle within 1/2 inch of a single area for at least
5 seconds. Use caution when doing this on more delicate fabrics.
When you are finished using your unit, immediately unplug power cord from
electrical outlet. Refer to Storage & Care guidelines on Page 8 of this manual for
proper storage and maintenance procedures.
FABRIC STEAMING
CAUTION: Always be sure that Steam Nozzle is pointed in a safe direction (away
from yourself, other people, pets and plants) when steaming.
CAUTION: Please do not put chemicals or other objects on the base of the unit
while the unit is being used.

12 English
PROPER STORAGE
Preparing your unit for storage is quick and simple. When you have finished your
steaming tasks, follow the steps listed below.
1. Set Steam Knob to “OFF” position and unplug power cord from electrical outlet.
2. Allow unit to cool (15 minutes for complete cooling).
3. Remove Water Tank from unit. Open Drain Plug and drain any water remaining
into a sink or tub. Securely replace Drain Plug and place empty Water Tank
back onto main unit.
4. For storage convenience, you may wish to collapse Telescopic Pole to its most
compact height.
5. Bundle power cord loosely and store in a cool, dry location.
MINERAL BUILDUP
A common maintenance need for steam appliances is the removal of build-up
caused by high mineral content in many municipal water supplies. This mineral
build-up may cause the unit to spew water, limit the effectiveness and reduce the
life of your unit.
The best way to minimize mineral build-up is to use distilled or de-mineralized water
when using your unit. In addition, it is recommended that the Reservoir be cleaned
at least once a month in order to remove any deposits that form. This will help to
extend the life of your unit and keep it functioning at its maximum potential.
TO REMOVE MINERAL BUILDUP
1. Set Steam Knob to “OFF” position and unplug power cord from electrical outlet.
2. Allow unit to cool (15 minutes for complete cooling).
3. Remove Water Tank from unit. Open Drain Plug and drain any water remaining
into a sink or tub.
4. Using a measuring cup, measure 4 oz. (118 ml.) of vinegar.
5. Slowly pour vinegar into Water Tank, then replace Drain Plug and place Water
Tank back onto main unit.
6. Allow vinegar to soak in Water Tank / Reservoir for 30-40 minutes.
7. Plug power cord into an electrical outlet and set Steam Knob to “ON”. Allow unit
to steam until no vinegar remains.
8. Drain vinegar from Reservoir into a sink or tub. Refill Reservoir with fresh water,
drain and repeat until vinegar odor dissipates.
9. Remove and refill Water Tank to maximum capacity (54 oz / 1597 ml) with fresh
water and place it back onto main unit. Allow all fresh water to flow into Water
Tank and be steamed out. Refill and repeat as necessary until vinegar odor has
completely dissipated.
10. When finished, set Steam Knob to “OFF” position and unplug power cord
from electrical outlet. Follow normal storage procedure as outlined in PROPER
STORAGE section.
STORAGE & CARE

13
English
TROUBLESHOOTING
POSSIBLE CAUSE AND SOLUTIONPROBLEM
Unit fails to heat up. Unit is not plugged in. Plug power cord into electrical
outlet.
Household circuit breaker / ground fault interrupter has
tripped or blown a fuse. Reset circuit breaker / ground
fault interrupter, or replace fuse. For assistance, contact
a licensed electrician.
Unit is damaged or in need of repair. Immediately cease
usage and unplug. Contact Consumer Service for
assistance.
No water in Water Tank. Refer to FILLING WATER TANK
procedure on Page 10 to refill Water Tank.
Steam output
is weak or
intermittent.
Water level in Reservoir is running low. Refer to FILLING
WATER TANK procedure on Page 10 to refill Water Tank.
Mineral build-up in unit. Refer to MINERAL BUILD-UP
section on Page 12 for cleaning procedure.
Unit is spewing
water.
Water tank is overfilled. Do not fill past max line.
Mineral build-up in unit. Refer to MINERAL BUILD-UP
section on Page 12 for cleaning procedure.

14 English
Vornado Air, LLC warrants to the original consumer or purchaser this Sharper Image® Steam Product
(“Product”) is free from defects in material or workmanship for a period of one (1) year from the date
of purchase. If any such defect is discovered within the warranty period, Vornado, at its discretion, will
repair or replace the Product at no cost.
For warranty or repair service: Call 833-800-8669 or email [e-mail] to obtain a
Return Authorization (“RA”) form. Please have or include your Product’s model number and serial
number, as well as your name, address, city, state, zip code and phone number when contacting
Vornado for warranty service.
After receiving the RA form, ship your Product to: Vornado Air LLC Attn: Warranty & Repair 415 East
13th Street Andover, KS 67002. For your convenience, please have your model number and serial
number when contacting Vornado with service inquiries. To assure proper handling, packages must be
clearly marked with the RA number. Packages not clearly marked with the RA number may be refused
at the receiving dock. Please allow 1-2 weeks for repair and return of your Product after the Product is
received.
Repairs not covered by the warranty or outside the warranty period will require a fee to cover the cost
of materials, labor, handling and shipping.
This warranty does not apply to defects resulting from abuse of the Product, modification, alteration,
mishandling, improper maintenance, commercial use or repair or service of the Product by anyone
other than Vornado; damages which occur in shipment or are attributed to acts of God. Improper
product use, which includes using an external device that alters or converts the voltage or frequency
of electricity, or shipping a Vornado product to a country not intended for use will void all warranties.
Any unauthorized product modification, repair by unauthorized repair center, or use of non-approved
replacement parts is not recommended and any consequences will not be covered by support
services or product warranties. The product warranty will be honored only on models that are being
used in the country intended. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
THE EXCLUSIVE REMEDY OF THE CONSUMER. VORNADO SHALL NOT BE LIABLE FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS
PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN
DURATION TO THE DURATION OF THIS WARRANTY. Some states do not allow the exclusion or limitation
of incidental or consequential damages, or allow limitations on how long an implied warranty lasts,
so the above limitations or exclusions may not apply to you. This warranty gives you specific legal
rights, and you may have other rights that vary from state to state. The manufacturer assumes no
responsibility for damage caused by failure to follow these instructions or improper product use. Any
such actions will invalidate the product warranty.
All company names and product names are trademarks of their respective owners. © All rights
reserved. All technical information, data, and instructions for the installation, connection, and operation
contained in these instructions for use correspond to the latest available information at time of printing.
The contents of this manual may differ slightly from the actual product. Observe any additional
supplements.
©2020 Vornado Air LLC, Andover, Kansas 67002 USA.
Specifications subject to change without notice.
Sharper Image® name and logo are registered trademarks.
Manufactured, marketed and distributed under license by Vornado Air LLC, Andover, Kansas 67002.
Manufactured in China.
U.S. Patents Pending.
Sharper Image® Distributed under license by Vornado Air LLC, Andover, Kansas 67002.
WARRANTY
If you’re not satisfied with this product, let us know.
1
YEAR
SATISFACTION
GUARANTEE

T470001 R, V00
SHARPER IMAGE
833.800.8669 |sihomecomfort.com |[e-mail]