ShenPaz Zirconia Blazir Specification sheet

Blazing the way
to simple sintering
Get Started Guide
www.shenpaz.com
Blazing the way
to simple sintering
5 HaTaasia Street
Ramat Gabriel Ind. Park,
Migdal HaEmek 23101, Israel
Tel: [phone]
Fax: [phone]
3Start a program
There are 3 possibilities:
From the opening screen,
select from preset PROGRAMS,
NEW PROGRAM or
VIA (optional feature).
To add a new program,
please refer to the enclosed
user manual.

Blazing the way
to simple sintering
Thank you for purchasing the “Blazir” sintering furnace
1Installing the heating elements
2Connect furnace to main current
and turn on the furnace. BLAZIR is sinter ready!
Step 1
Take off the top cover
with exhaust airpipe
by unscrewing the 4
screws located in
each corner of the top
Step 2
From the accessory
bag take the
connection metal
strips, tools, and
extra screws
Step 3
Carefully unpack each
heating element from their
box and place into furnace
one by one. NOTE: heating
elements are very fragile.
Assure Blazir is disconnected from power supply.
A
B
B
B
D
C
C
3TC
A
A A
THIGHLY connect the 3 metallic strips with provided hexa screws as
per image above. NOTE exact position of strips.
B
Connect each power cable with screws to the respective
heating element (see above)
C
Close top of furnace by screwing the cover back on.
ASSURE that the edge of exhaust pipe is in hole.
D
Check that the TC is not in contact with the metallic strips
3TC
Insert each of the 4 heating elements into their placement on the top
of the muffle, paying attention that the bottom of the HE is also
correctly aligned in the base of the muffle.
A