Shining 3D EinScan-SE User manual

EinScan-SE
Desktop 3D Scanner
User Manual

1
Device List and Specification.............................................................................................2
Device List .....................................................................................................................3
System Requirement .....................................................................................................5
Installation Notes ..............................................................................................................6
Hardware Installation....................................................................................................7
Software download.......................................................................................................9
Software installation ...................................................................................................10
Software Introduction ...................................................................................................11
Scan Preparation .......................................................................................................12
First Scan .....................................................................................................................13
1.2.1. Help Mode for Beginners ................................................................................13
1.2.2. Obtain License File ..........................................................................................13
1.2.3. Operation Procedure.......................................................................................13
Drop down Menu ........................................................................................................15
1.3.1. Language .........................................................................................................15
1.3.2. TeamViewer.....................................................................................................15
1.3.3. Feedback .........................................................................................................16
1.3.4. User Setting ...................................................................................................16
1.3.5. Factory Default ................................................................................................17
1.3.6. Einscan Community.........................................................................................17
1.3.7. About .............................................................................................................17
Calibration.......................................................................................................................18
Calibration...................................................................................................................19
Calibration Precaution.................................................................................................22
Auto Scan ........................................................................................................................23
Help Mode for Beginner ............................................................................................24
Scan Operation............................................................................................................25
Help .............................................................................................................................33
Model Viewer..............................................................................................................33
Fixed Scan........................................................................................................................35
FAQ..................................................................................................................................38
Contact Us .......................................................................................................................40
Catalog

2
1

3
Items
Picture
Quantity
Scanner Head
1
Turntable
1
Scanner Stand
1
Scanner Bracket
1
Calibration Board
1
Calibration Board Holder
1
Power Adapter
1
Power Cord
1
USB Cable
1
USB Cable
1
Quick Guide
1
Device List

4
Specification Parameter
Model
EinScan-SE
Scan Mode
Auto Scan
Fixed Scan
Scan speed
<2min
<8s
Point distance
0.17mm~0.2mm
Accuracy
Single Scan
Accuracy: 0.1mm
Suitable
distance
290—480mm
Light source
White light LED
Maximum
scan volume
200mm*200mm*200mm
700mm*700mm*700mm
Minimum scan
volume
30mm*30mm*30mm
30mm*30mm*30mm
Texture Scan
Yes
Outdoor
Operation
No (affected by strong light)
Special Scan
Object
For transparent, reflective and dark object, please spray powder first
before scanning
Printable Data
Output
Yes
Data Format
OBJ, STL, ASC,PLY,3MF
Specification Parameter

5
Items
Recommended PC configuration
Operating System
Win7，8，10，64bit
Port
at last one USB2.0/3.0 port
RAM
>8G
Graphic Card
NVDIA Series
Graphic Memory
>1G
CPU
i5 or higher
System Requirement

6
2

7
Scanner Set-up
Step 1. Place the scanner head onto the bracket.
Step 2. Insert calibration board onto the board holder .
NOTE : Rotate the calibration board only while calibration.
Step 3. Turntable and Scanner installation.
1) Place the turntable onto
scanner stand
2) Screw the scanner into
the socket on the stand.
Hardware Installation

8
3) Plug power cord into outlet and the back of scanner;Plug USB cable into back of
scanner and computer USB port;Plug USB cable into back of scanner, and turntable
Scanner Turn-on/off
Hold on the touch switch for about one second to turn the scanner on;
Double-click on the touch switch and stay for one second each time to turn the scanner off.
Hardware Installation

9
Software download
Firstly, enter the Support page: http://www.einscan.com/support. Click “Software download”, as
shown below:
Secondly, please complete the registration, if registered, click log in.
After take the survey, it will enter the page http://www.einscan.com/software-download
Finally, click the icon to jump to the page of any file to download the software.
Software download

10
Software Installation
Double click installation package,
Follow the instructions as the window
pops up. Users can either choose the
default installation path or click the
Browse button to select the installation
path. Default installation is suggested.
When the acquired activated file
window pop-ups, you can choose
multiple device types, then click “Next”.
Please confirm there is only one
device connected. Choose the mode to
get activated file: Online activation and
local activation ( click ). After activating a device, you can unplug the device and plug in other
device to continue activating. When finishing click “Next”.
When installation is finished, there will be a shortcut of the software and teamviewer
on the desktop.
In the next step, we need to check whether the camera driver installation is successful, right
click “Computer”, choose “Computer Management”-“Device Management”-“Imaging devices” to
check if the camera display normally.
Note：You should One-click on the touch switch to
turn the scanner on.
Software Uninstall
Open the start menu, choose Shining3d----Click “Uninstall or Modify Einscan”, as shown
below.
Software Installation

11
3
The software provides Fixed Scan ( Without turntable ),
Auto Scan.

12
Mode selection
(1) Auto Scan: This mode is recommended for objects within the size of 200*200*200mm.
(2) Fixed Scan: This mode is recommended for objects over the size of 200*200*200mm, as well
as a comparative stable environment (without obvious vibration) are required.
Not recommended to scan objects within the size of 30*30*30mm.
Special objects
Before scan objects in transparent, semi-transparent or black shall spray on the surface.
Scan Preparation

13
Choose the device “EinScan-SE”, as shown below.
1.2.1. Help Mode for Beginners
Close Help Mode for Beginner by clicking the top right corner . To
open Help Mode for Beginner, go to Menu -> User Setting ->Help Mode for Beginner
1.2.2. Obtain License File
When a warning of license file doesn’t match the scanner pops up when entering scanning mode,
the license file can be acquired by clicking “ Activate”
1.2.3. Operation Procedure
Operation Procedure
First Scan

14
Operation Procedure

15
Click from the upper right to open drop down menu.
1.3.1. Language
This software version is including Simplifed Chinese, Chinese, English, German, Japanese,
Spanish, French, Korean, Russian and Turkish. Language can be switched in the choose device
type interface.
1.3.2. TeamViewer
By clicking TeamViewer, you can go to the TeamViewer interface directly without installation.
Drop down Menu

16
1.3.3. Feedback
If you have any questions, or suggestions, please share with us by clicking “Feedback”. Leave
your email in “ My E-mail”
1.3.4. User Setting
Debug window
Tick the checkbox to open debug window; if you want to close it, unselect it.
Help Mode for Beginners
Help Mode for Beginner is the default selection, which is to guide the new users make a scan
completely step by step. Close Help Mode for Beginner by clicking the top right corner
. To open Help Mode for Beginner, go to Menu -> User Setting ->Help
Mode for Beginner
Drop down Menu

17
User Experience Program
To help us improve the quality and user experience of Einscan, we hope to be allowed to
collect usage information to Einscan Team. This information will not identify you and does not
include your project data. By default, this checkbox is selected, and we strongly recommend you
to select it.
1.3.5. Factory Default
System setting (brightness, turntable steps), calibration data will restore to the factory
default settings. Language will be changed into English as default. Factory Default will require
software restart.
1.3.6. Einscan Community
Official Website ( http://www.einscan.com/ ) refers to SHINING3D official website for product
and information.
Community ( http://www.einscan.com/einscan-experts-forum ) refers to SHINING3D forum for all
EinScan users to discuss and share the experience.
Facebook (https://www.facebook.com/groups/einscan ) refer to facebook for Einscan users to
discuss and share the experience.
1.3.7. About
Software version information, and technical support mail can be found here.
Drop down Menu

18
4
Scanning cannot be entered if calibration is not done after
installing the software. There is a WARNING: No calibration
data, please calibrate first.

19
Click ‘Calibrate’ to enter the interface of calibrate. The first time choose the device type and
click “Next”, it will enter the calibration interface automatically.
The interface of calibrate:
Calibrating your scanner is important in order to get accurate scan results. The
following describes the three steps required to successfully calibrate your scanner.
Follow the software operation guide, adjust the distance between the projector and
Calibration