Shure SCL5 User manual

SCL5
Sound Isolating Earphones
The SCL5 combines Dual Live
Performance Drivers with an Inline
Crossover to create the same reference-
quality audio developed for
professional musicians.
The result of dedicated
speakers for highs
and lows is the faithful
reproduction of precision
highs, natural mids, and
full-bodied bass.
/
INSERTING THE EARPHONES
If the earphone seems to be lacking in low frequency response (bass), check
the tightness of the seal between the earphone and your ear, or try one of the
other sleeve options.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
WEARING THE EARPHONES
Two popular methods for wearing the earphones are illustrated below.
CHOOSING AN EARPHONE SLEEVE
Your earphones come with a selection of sleeves. Make sure the sleeve you
use is easy to insert into your ear, ts comfortably, and is easy to remove from
your ear.
CLEANING THE EARPHONE NOZZLE
If the nozzle of your earphone is blocked, clean the nozzle using the supplied
wax removal loop.
SHURE Incorporated http://www.shure.com
United States, Canada, Latin America, Caribbean:
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
Phone: [phone] U.S. Fax: [phone] Int’l Fax: [phone]
Europe, Middle East, Africa:
Shure Europe GmbH, Phone: [phone] Fax: [phone]
Asia, Pacic:
Shure Asia Limited, Phone: [phone] Fax: [phone]
Make sure that the sleeve completely
covers the earphone nozzle. If any part
of the nozzle is exposed, the sleeve is
not properly installed.
Yellow and Black Foam Sleeves
When using the foam sleeves, compress the sleeve between
your ngers before inserting it into the ear canal. Hold the
earphone in place for about ten seconds while the foam
expands and creates a tight seal. Black foams come in
small, medium and large sizes.
Soft Flex Sleeves
In small, medium, and large sizes. Made from pliable rubber.
Triple-Flange Sleeves
If desired, the sleeve nozzle may be shortened. Use sharp
scissors to carefully trim the nozzle to the desired length.
Nozzle
Wax Removal Loop
Tighten the cable and take up slack by raising the cable sleeve .
When cleaning, do not force any object through the earphone nozzle! This will
damage the earphone sound lter.
If necessary, the supplied replacement nozzles may be used. See the back of
this guide for instructions on nozzle replacement.
©2007, Shure Incorporated
27EN3251 (Rev. 1)
Printed in U.S.A.
Over the ear
in back Over the ear
in front
left ear right ear
Warning: The wax removal loop is only to be used to clean
earphones. Any other use, such as using the tool to clean
ears, could result in injury.

CUSTOM EARPHONE SLEEVES
Those who use earphones regularly for extended periods of time often nd
custom-t molded sleeves offer the best comfort and sound isolation.
Ask a Hearing Health Care Professional about creating custom molded sleeves
for your earphones. For more information, contact:
Sensaphonics Hearing Conservation Toll Free: [phone]
660 N. Milwaukee Avenue In Chicago: [phone]
Chicago, IL 60622
e-mail: [email protected]
www.sensaphonics.com
TECHNICAL SPECIFICATIONS
Transducer type Dual low mass/high energy
Sensitivity (at 1kHz) 122 dB SPL/mW
Impedance (at 1kHz) 110 W
Output connector Gold-plated 3.5 mm (1/8-inch) stereo plug
Cable length 155 cm (61”)
Net weight 31 g (1.1 oz.)
Operational temperature -18° C to 57° C (0° F to 135° F)
Storage temperature -29° C to 74° C (-20° F to 165° F)
FURNISHED ACCESSORIES
• Premium Carrying Case
• Fit Kit: contains soft foam, soft ex and triple ange sleeves plus
cleaning tool
• Stereo Adapter Plug - 1/4 in. (6.5mm) to 1/8 in. (3.5mm)
ACCESSORIES
For information about earphone accessories (listed below) and other Shure
products visit: www.shure.com
• Replacement Sleeves • Extension Cable
• Carrying Case • Push To Hear (PTH Module)
• Adapters • Volume Control
CERTIFICATION
Eligible to bear CE marking.
Conforms to European EMC Directive 89/336/EEC.
Meets applicable tests and performance criteria in European Standard
EN 55103 (1996) Parts 1 and 2, for residential (E1) and light industrial (E2)
environments.
MAINTENANCE
Careful maintenance ensures a tight seal between the sleeve and nozzle,
improving sound quality and product safety.
Keep the earphones and sleeves as clean and dry as possible.

To clean sleeves, remove them from earphones, gently rinse in
warm water and air dry. Foam sleeves require a longer drying
time. Inspect for damage and replace if necessary.
Ear sleeves must be completely dry before reusing.
Wipe the earphones and sleeves with mild antiseptic to avoid
infections. Do not use alcohol-based disinfectants.
Do not expose earphones to extreme temperatures.
Replace the sleeves if they do not t properly.
xDo not attempt to modify this product. Doing so will void the
warranty and could result in personal injury and/or product failure.