Shure KSM32 User manual

KSM32
©2014 Shure Incorporated
27C3044 (Rev. 7)
User Guide
Le Guide de I'Utilisateur
Bedienungsanleitung
Guia del Usuario
Guida deii'Utente
PyKOBOtlCTBO
nOJlb30BaTeJlR
!lJltH~a~•
A~~A~
~LHAi
fflP1~WJ
0
')t
£ (
E:
Printed in U.S.A.

SHURE
INCORPORATED
Embossed Single-Diaphragm Microphone
Thank you for selecting the KSM series from Shure.
Over 85 years of audio experience has contributed to making this one of
the finest microphones available.
If
you have any questions not answered
in
this guide, please contact Shure Applications Engineering at 847-600-8440,
Monday through Friday, from
8:00am
to
4:30pm,
CST.
In
Europe, call49-7262-92490.
Our web address
is
www.shure.com.

General Description
The
Shure®
KSM32
is
a premium, side-address,
condenser microphone with a cardioid polar pattern
engineered for highly critical studio recording and live
sound productions. With
an
extremely flat, extended
frequency response, the KSM32 provides transparent
reproduction of the original sound source. A 15 dB
attenuation switch allows the KSM32
to
handle the high
sound pressure levels (SPL) associated with drums,
percussion, and ensembles, while the 3 position low cut
filter helps counteract stage vibrations or
proximity effect.
Performance Characteristics
Extremely uniform polar response
Extended frequency response
Minimal self-noise
Exceptional low-frequency reproduction
• Able
to
withstand high SPLs
High output level
No crossover distortion
Superior common-mode rejection and suppression
of radio frequency interference (RFI)
Applications
Brass and woodwind instruments
Orchestras, choirs, and wind ensembles
Overhead miking of drums and percussion
instruments
Close-miking of acoustic instruments such as piano,
guitar, violins, drums, and percussion
Low-frequency instruments such
as
double bass
and kick drum
Electric guitar and bass amplifiers
Vocals and speech
Room ambience
Note: Sound quality
is
strongly affected by microphone
location and room acoustics.
To
achieve the best
overall sound for a particular application, it may
be
necessary to experiment with microphone placement
and room treatments.
2
Features
Class
A,
transformerless preamplifier circuitry
eliminates cross-over distortion for improved
linearity across the full frequency range
Embossed, high-compliance diaphragm provides
extended low frequency response and consistent
off-axis rejection
Ultra-thin, 2.5
1-1m
24-karat gold-layered, low-mass
Mylar®
diaphragm for superior transient response
15 dB attenuation switch for handling extremely
high SPLs
Variable low-frequency filter provides greater
flexibility to counteract proximity effect or to reduce
mechanical rumble
Integrated three-stage "pop" protection grille
reduces plosives and other breath noise
Cardioid polar pattern reduces the pickup of
unwanted sounds
Internal shock mount reduces handling and
stand noise
Superior build construction withstands daily use
on
the stage or
in
the studio
Variations
The KSM32/SL has a champagne-colored finish and
comes with the following accessories:
Locking aluminum carrying case
ShureLock® elastic-suspension shock mount
Protective velveteen pouch
The KSM32/CG has a non-reflective, charcoal-gray
finish for situations where less microphone visibility
is
preferred, such as live sound and stage production.
It
comes with the following accessories:
ShureLock® swivel mount
Padded, zippered carrying bag

Power Requirements
This microphone requires phantom power and performs best with a 48 Vdc supply (IEC-61938). However, it will
operate with slightly decreased headroom and sensitivity with supplies as low as
11 Vdc.
Most modern mixers provide phantom power. You must use a balanced microphone cable: XLR-to-XLR or
XLR-to-TRS.
Suspension Mount
Use the supplied ShureLock® rubber suspension mount to secure the microphone to
a floor or boom stand.
Important: Thread the knurled locking ring securely to the base of the microphone.
Do not overtighten.
Positioning
Position the front of the microphone, with SHUiC,E', towards the
desired sound source. Position the rear of the microphone, with
the vintage
circleS logo, towards any unwanted sound sources.
-
Selecting Low-Frequency Response
A three-position switch on the back of the microphone lets you adjust the low-frequency response. Use
the low-frequency filter to reduce wind noise, room noise, or proximity effect.
Flat response. Provides the most natural sound in
most applications.
Low frequency cutoff. Provides an 18 dB-per-octave cutoff
at 80 Hz. Helps eliminate floor rumble and low-frequency room
noise from heating and air conditioning systems. This setting
may also be used to compensate for proximity effect or to
reduce low frequencies that make an instrument sound dull or
muddy.
Low frequency rolloff. Provides a 6 dB-per-octave rolloff filter
at 115 Hz. Use this to compensate for proximity effect or to
reduce low frequencies that could make an instrument sound
dull or muddy.
3
m
"C
+5
0
-10
v
v
20
--
...--,....
/,'
//
I
;-_'
50
,
__ ..
~--
,
_ ....
-
2 3 4 56 789
100 1000
Hz
Flat Response
Low Frequency
Cutoff
Low Frequency Rolloff

Setting Attenuation
The attenuation switch lets you reduce the signal level without altering the frequency response. This can prevent
extremely loud sounds from overloading the microphone.
0 dB For "quiet" to "normal" sound levels.
·15 dB For use with extremely loud sound sources such
as
drums, horns, or loud guitar cabinets.
Load Impedance
Maximum SPL capability, output clipping level, and dynamic range vary with the input load impedance of the
preamplifier to which you connect the microphone. Shure recommends a minimum input load impedance of
1000
0.
Most modern microphone preamplifiers meet this requirement. Higher impedance results
in
better performance for
these specifications.
Integral Pop Filter
The microphone grille consists of 3 separate mesh layers that act
as
an
integral pop filter. This helps reduce wind and breath noise.
Depending
on
the performer,
an
external pop-protection screen or
windscreen may
be
necessary when close-miking vocalists.
ACCESSORIES AND PARTS
Furnished Accessories
Shurelock® Isolating Shock Mount
Shurelock® Champagne Swivel Adapter
Aluminum Carrying Case
Protective Velveteen Pouch
Optional Accessories
Windscreen
Padded, Zippered Carrying Bag
Popper Stopper™
Replacement Parts
Suspension Shock Mount Elastic Cord, Champage (contains one)
4
Popper Stopper™
A32SM
A44M
A44SC
A44VB
A32WS
A32ZB
PS-6
9582125

SPECIFICATIONS
[11 1 Pa=94 dB SPL
Electret Condenser
Cardioid
20 to 20,000 Hz
150 n
-36 dBV/Pa[1l (16.0 mV)
PAD ON 2500 0 load 154 dB
1000 0 load 148 dB
PAD OFF 2500 0 load 1
39 dB
1000 0 load 133 dB
81 dB
2500 0 load 126 dB
1000 0 load 119 dB
2500 0 load 9.0 dBV
1000 0 load 3.0 dBV
13.0 dB SPL-A
:2:50dB
0,-15 dB
Flat,
-6 dB/octave below 115 Hz, or -18 dB/octave below 80 Hz
Three-pin professional audio (XLR), male, balanced
Positive pressure
on diaphragm produces positive voltage on pin
2 with respect to pin 3
11-52 V 0C[4l phantom power (IEC-61938), 4.7 mA
490 g (17 oz.)
[2lTHD of microphone preamplifier when applied input signal level is equivalent to cartrid{le output at specified
SPL
[3lS/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
[4 lAII specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower volt-
ages, but with slightly decreased headroom and sensitivity.
5

+10
r-------i
15
cm.
1
_,..------
r-
...
-
~..,.ooi.-ol\
--- -
~
v
I
60
em.
I
'
0
-10
2 3 4
56
789 2 3 4 5 6 789
20
50
100 1000 10000 20000
CERTIFICATION
125Hz
-
260Hz
·······
500/1000
Hz
---
-
Eligible
to
bear CE Marking. Conforms to European EMC
Directive 2004/1 08/EC. Meets Harmonized Standards
EN55103-1 :1996 and EN55103-2:1996, for residential
(E1) and light industrial (E2) environments.
The Declaration of Conformity can be obtained from:
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: [phone]
Fax: [phone]
11
4
Email: [email protected]
Hz
6
2500Hz-
10000
Hz----
5000
Hz ·······
15000
Hz·
· · ·
187 mm
(7.37 IN.)
55.9 mm
(2.20 IN.)

Trademark Notices: The
circularS
logo, the stylized Shure logo, and the word, "Shure" are registered trade-
marks of Shure Incorporated
in
the United States. "SHOCKSTOPPER" is a trademark of Shure Incorporated
in
the United States. "Mylar" is a registered trademark of
E.
I.
DuPont de Nemours and Company
in
the
United States. These marks may be registered
in
other jurisdictions.
Patent Notice: Patent Des. 400, 540
www.shure.com
United
States,
Canada,
Latin
America,
Caribbean:
Shure Incorporated
5800 West Touhy Avenue
Niles,
IL
60714-4608
USA
Phone: [phone]
Fax:
847-600-1212
(USA)
Fax:
847-600-6446
Email: [email protected]
Europe, Middle East, Africa:
Shure Europe GmbH
Jakob-Dieffenbacher-Str. 12,
75031 Eppingen, Germany
Phone: [phone]
Fax: [phone]
Email: [email protected]
Asia,
Pacific:
Shure
Asia
Limited
22/F,
625
King's
Road
North Point, Island
East
Hong Kong
Phone:
852-2893-4290
Fax:
852-2893-4055
Email: [email protected]

~q
Ȣ
~
~~
il=
~
~
;:::t-
~~~~
iil
H
~~
Jilt
Jilt
~
'*
••
~
ill
Jilt
Jilt
~
1$1}D!It}
~
~~
>311>311
~Fft
\-7~
Fft~
~~
~~
~Jilt
~~
~>311
I~
~~
>311-B-
~~
~*
-B-.
~~
*J+t
•en
X X
~c....
ff~
(/)
......
c....W
~~
:::~
~g
wm
N~
8M
(J)~
~~
0 0
~·
,.,WI!
~*
·~
:7i
0 0
0 0
0 0
0 0
,..,
=
~
em
¥
$i
~
D;:>
X
-=u
~
*II
0
'I
!e.
~
0
()
.e
()'I·
0
.=:$
3$
~
0
"U)lmi
~;lfl
**
~
-u)lmi
0
OJ
II
~**
•
~
~
I»
~
Jbt
•
Jbt
Dlli}
~
>311
~
?fl
•
,.
a.
a.
CD
:I
a.
c
3

SHU
®
LEGENDARY
PERFORMANCE™
Register Online:
S'inscrire en ligne:
Online-Registrierung:
Registrazione on line:
Registrar Online:
Registre-se Online:
3aperll1cTpll1py~recb Ha se6-calllre:
;f-/7-1' /i!~~:
1£~~5ifflt :
il¥1 L- =+liD. .
'"l'tJ ...LRl:.IIIJ ·
.2.2_LO I -=~·
L- r L.....! o --, .
.. -·1 J
~ \..1...l ~ ""' ' u
~~~ ..
www.shure.com/register
©2008 Shure Incorporated
27C3092 (Rev.
5)

.... .
.
SICHERHEITSVORKEHRUNGEN
PRECAUTIONS
~~-
. .
.
~
PFtECAUZIONI
Dl
SICUREZZA
·
PRECAUCIONES
QE
&ouRtti4.o
·.-.-,-
-,-
,
·.··
''
''
' '
....
-
.-
.
MIDIDAS
DE
SEGtJa:tAH9A
:
mAo.•-•••
·\•\
..
.:(..,
XS11o.Q'IE"
,
,~,...
.
~~-·-
"~·
-·-'
·.
·
·.·
>
_:
:'::
:
:.:.
:.:
·:
,:·_::·.·:
.:-
:·.·_..::
..
.::
::·::
-:-:
. :
·:
...
~1-HJRE
.
InCorporateo
httf).://www
.
shure.com
United
States
·Canada
·• . . •·
•.
t . .
t . . .•
.•.
. .. .
5800W.
Touhy
Avenue,Niles
;lL60714-4608;
u.s.A~
Phone:
847~600~2000
U.S.
FaX:
847~600~t212
...
..
lnt'lFax:
847-60~446
·· . · . '
Europe,
Mid(iJe
East,
Afrfca:
x · . / .. · • ··
Shure
Europe
GmbH,
Phop§
:49-7262
9249CJ
Fax:
.
4~
~
7262
9249114· ...
....
.
A~ia,
!79cific
~
Shure
Asia
Lirtlite(j,
Phoqe:
8~2~2893--42~{}
F"x:
·
t)52:-2893-4Q55
\
<
···.
....
.
..
·
..
-.
..

SAFETY
PRECAUTIONS
The
possible results of incorrect
use
are
marked
by
one
of the
two
symbols-
~~wARNING"
AND
''CAUTION"- depending
on
the imminence of the danger
and
the severity of the
damage.
&
WARNING:
Ignoring these warnings
may
cause
severe
injury
or
death
as
a
·
resu
It of incorrect operation.
&
CAUTION:
Ignoring these cautions
may
cause
moderate injury
or
property
·
damage
as
a
resu
It of incorrect operation.
&
WARNING
• If
water
or
other foreign objects enter the inside of the device, fire
or
electric
shock
may
result.
•
Do
not attempt to modify this product. Doing
so
could result
in
personal
injury and/or product failure. &
CAUTION
•
Never
disassemble
or
modify the device,
as
failures
may
result.
•
Do
not subject to extreme force
and
do
not pull
on
the cable
or
failures
may
result.
•
Keep
the microphone dry
and
avoid
exposure
to extreme temperatures
and
humidity.
WARNING:
This product contains a chemical
known
to the State of California to
cause
cancer
and
birth defects
or
other reproductive
harm.
2783260
(Rev. 2) ©2012 Shure Incorporated

SHU
®
Service Centers
United States, Canada, Latin America, Carribbean
Shure Incorporated
Attn: Service Department
5800
W. Touhy Avenue
Niles, IL 60714-4608 U.S.A.
Europe, Middle East, and Africa
Shure Europe GmbH
Attn: Service
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Asia
Shure Asia Limited
22/F, 625 King's Road
North Point, Island East
Hong Kong
Attention: Service Department
Phone: [phone]
Fax: [phone]
Email: [email protected]
Indonesia
Service Center Resmi:
Jakarta Hotline [phone]
Medan(061)6612550
Surabaya(031)5032219
Jo~akarta(0274)371710
Denpasar(0361)766788
Makasar [phone]

LIMITED WARRANTY
Shure Incorporated ("Shure") hereby warrants to the original consumer purchaser only that,
except as otherwise specified below, this product will be free in normal use of any defects in
materials and workmanship for a period
of two (2) years from the consumer's original date of
purchase directly from Shure or from a Shure-authorized reseller.
Any rechargeable batteries contained in
or packaged with this product are so warranted for a
period
of one (1) year from the consumer's original date of purchase. However, rechargeable
batteries are consumable and their capacity will be reduced over time based on temperature,
amount of time in storage, charging cycles, and other factors; hence reduction in battery
capacity does not constitute a defect in material or workmanship.
At its sole option, Shure will repair
or replace the defective product and promptly return it
to you. In order forthis warranty to be valid, the consumer must, at the time the product
is returned, provide proof of purchase in the form of the original purchase receipt directly
from Shure or from a Shure-authorized reseller. If Shure elects to replace the defective
product, then Shure reserves the right to replace the defective product with another product
of the same model or a model of at least comparable quality and features in Shure's sole
determination.
If you believe this product is defective within the warranty period, carefully repack the unit,
insure it and return it with proof of purchase, postage prepaid, to Shure Incorporated, Atten-
tion: Service Department, atthe address below.
Outside of the United States, return the product to your dealer
or Authorized Service Center.
Addresses are listed on www.Shure.com
or can be obtained by contacting Shure at the
address listed below.
This warranty is not transferable. This warranty does not apply in cases
of abuse or misuse
of the product, use contrary to Shure's instruction, ordinary wear and tear, an act of God,
negligent use, purchase from a party other than Shure
or a Shure-authorized reseller, unau-
thorized repair,
or modification of the product.
.
ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ARE HEREBY DISCLAIMED
TO THE EXTENT PERMITTED UNDER APPLI-
CABLE LAWS AND, TO THE EXTENT NOT PERMITTED, ARE HEREBY LIMITED
TO THE
DURATION AND TERMS OF THIS WARRANTY. SHURE ALSO HEREBY DISCLAIMS-ALL
LIABILITY FOR INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion
or limitation of incidental or consequential damages, so the above limitation may not apply to
you. This warranty gives you specific legal rights, and you may have other rights which vary
from state to state.
This warranty does not restrict the rights
of the consumer mandated under applicable laws.
THIS WARRANTY SUPERSEDES ALL OTHER WARRANTIES THAT ARE ASSOCIATED
OR INCLUDED WITH THIS PRODUCT, EXCEPT THAT ANY SOFTWARE CONTAINED
IN
OR PACKAGED WITH THIS PRODUCT IS EXCLUDED FROM THIS WARRANTY AND
INSTEAD SHALL BE COVERED
BY THE WARRANTY, IF ANY, PROVIDED IN SHURE'S
END USER LICENSE AGREEMENT ACCOMPANYING SUCH SOFTWARE.

LIMITED WARRANTY
© 2013, Shure Incorporated
27E3175 (Rev.
1)
®
1:-'3 Printed in U.S.A.
~~