Shuttle XPC SD11G5 User manual

XPCUserGuide
Forthe:SD11G5

ShuttleMainboardEMITestStatement
Shuttlemainboardshavebeenthrough EMItestsaccording tothe following seriesofregulations:
EN55022/CISPR22/AS/NZS3548ClassB,EN55024(1998/AS/NZS),EN4252.1(1994),EN61000,
ANSIC63.4(1992),CFR47 Part15 SubpartB,and CNS13438 (1997).The itemstested are
illustrated asfollows:
(A)Voltage:AC110V/60HZ&AC230V/50HZ
(B)Tested ProductInformation:
ProductName:PCMainboard
Status:Sample
ModelName:SD11G5
S/N:N/A
CPU:
ExternalFrequency:400 MHz
IntelPentiumM,Socket479 Processor:1.7/1.46 GHz
ExternalFrequency:533 MHz
IntelPentiumM,Socket479 Processor:2.0/1.86/1.73/1.6GHz
ExternalFrequency:400 MHz
Celeron M,Socket479 Processor:1.5GHz
VGAPort: one portwith15 pins
DVIPort: one portwith24 pins
KeyboardPort: one portwith6pins
MousePort: one portwith6pins
S-Video Port: one portwith7pins
USB 2.0Port: sixportswith4pinsrespectively
1394 Port: one portwith4pinsand one portwith6pins
LANPort: one portwith8pins(10Mbps/100Mbps/1000Mbps)
Line-OutPorts:fiveports
Mic-InPorts:one port
Line-InPorts:one port
SPDIF-Out(Optical)Port: one port
SPDIF-In(Optical)Port: one port
ClearCMOSbutton:one port
DIMMMemory(optional):DDR2400/533 *2
PowerCable:Detachableand Shielded (withaGND pin)
Monitor:CRT+DVI
MaximumResolution:1280 X1024 V:60Hz

All CPUshavecompletelybeen tested,and valuesoffered bythe worstEMIcombination of
CPUexternalfrequency arelisted asfollows:
TestMode ExternalFrequency CPU CPUOpen/Close
1 533MHzPentiumM2.0GHzClose
2 533MHzPentiumM2.0GHzOpen
3 400MHzPentiumM1.7GHzClose
4 400MHzPentiumM1.7GHzOpen
5 400MHzCeleronM1.5GHzClose
6 400MHzCeleronM1.5GHzOpen
(C)Remedyforthe Tested Product&ItsEMIInterference:
Remedy:N/A
EMIInterference:
Crystal:14.318MHz(X2)/25MHz(X5)/32.768KHz(X1)/24.5MHz(X3)/24.5MHz(X4)
ClockGenerator:U5
(D)Supported HostPeripherals:
Component Brand Model No. / Spec.
HDD Maxtor 7Y250M0/6Y200M0
CD-ROM BTC DRW1108IM, DVD-Dual
Memory x2 A-Data 430F3H4TR/DDR2/533, 512MB
Power Delta SADP-220DB, 220W
(E)NoticesforAssembling Computers:
1.AnI/Oshielding shouldbe contacted withI/Ometallicpartsofamainboard.
2.Cablesshouldappropriatelybe arranged and fixed inacase.Followinstructions:
ØLeaveIDEcablesnotcrossed upon CPUand SDRAM;
ØLeavepowercablesminimuminlength,and notcrossed upon amainboard;
ØLeaveCPUfan cablesminimuminlength,and notnearCPU;
ØLeavecableson panelsand othersparecablestied inacomputercase.
3.Makesurean EMIshielding attached toacasehasbeen properlyinstalled.
4.Makesurea5.25"driveandscrewsarefastened tothe case(EMIshielding).
5.Makesurethe caseisincontactwithEMIconnection points.
6.Makesurethereisno cleft inthe case.
7.MakesureaPCIdoorisbound toacase.
8.Makesurecablesofotherdevices(fansorsomeothers)arefixed inacase.

Shuttle®
XPCInstallation Guide
Copyright
Copyright©2005 byShuttle®Inc.All RightsReserved.
Nopartofthispublication maybereproduced,transcribed,storedinaretrievalsystem,
translatedintoanylanguage,ortransmittedinanyformorbyanymeans,electronic,
mechanical, magnetic,optical, chemical, photocopying,manual, orotherwise,withoutprior
writtenpermission fromShuttle®Inc.
Disclaimer
Shuttle®Inc.shall notbeliableforanyincidentalorconsequentialdamagesresultingfrom
theperformanceoruseofthisproduct.
Thiscompanymakesno representationsorwarrantiesregardingthecontentsofthisma-
nual. Information inthismanualhasbeencarefullycheckedforreliability;however,no
guarantee isgivenastothecorrectness ofthecontents.Intheinterestofcontinuedproduct
improvement, thiscompanyreservestherighttorevisethemanualorincludechangesin
thespecificationsoftheproductdescribedwithinit atanytimewithoutnoticeand without
obligation tonotifyanyperson ofsuchrevision orchanges.Theinformation containedin
thismanualisprovidedforgeneralusebycustomers.
ThisdevicecomplieswithPart15 oftheFCC Rules,Operation issubjecttothefollowing
twoconditions:
1.Thisdevicemaynotcauseharmfulinterference.
2.Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay
causeundesiredoperation.
Trademarks
ShuttleisaregisteredtrademarkofShuttleInc.
Inteland PentiumareregisteredtrademarksofIntelCorporation.
PS/2isaregisteredtrademarkofIBMCorporation.
AWARDisaregisteredtrademarkofAwardSoftwareInc.
Microsoft and WindowsareregisteredtrademarksofMicrosoft Corporation.
GeneralNotice
Otherbrand and productnamesusedhereinareforidentification purposesonlyand may
betrademarksoftheirrespective owners.
9M0-A71SD0-11G0

Installation Notices
Donotplace thisdevice underneath
heavy loadsorinanunstableposition.
Donotexpose thisdevice tohigh
levelsofdirectsunlight,high-humidity
orwetconditions.
Donotuse orexpose thisdevice
around magneticfieldsas magnetic
interference may affectthe
performance ofthedevice.
Donotblock theairventstothis
device orimpedetheairflowin
anyway.
CAUTION
Incorrectlyreplacingthebatterymaydamage thiscomputer.Replaceonlywith
the sameorequivalentasrecommendedbyShuttle.Disposeofusedbatteries
accordingtothemanufacturer'sinstructions.
SafetyInformation
ReadthefollowingprecautionsbeforesettingupaShuttleXPC.

ThisdevicecomplieswithPart15 oftheFCC Rules.
Operation issubjecttothefollowingtwoconditions:
(1)Thisdevicemaynotcauseharmfulinterference,and
(2)Thisdevicemustacceptanyinterferencereceived;
includinginterferencethatmaycauseundesired
operation.
POWER-FCC Appendix
PAR-OTPAGE-0000

TABLEOFCONTENTS
1Function Introduction .......................................................................................... 1
1.1XPCIntroduction ........................................................................................... 1
1.2ModelSpecifications..................................................................................... 2
1.3XPCExteriorDissection................................................................................ 3
1.3.1XPCFront ............................................................................................. 3
1.3.2XPCBack ............................................................................................. 4
1.4Accessories .................................................................................................... 5
1.5XPCMainboard.............................................................................................. 6
1.5.1FD11mainboardillustration ................................................................... 6
1.5.2JumperSettings.................................................................................... 7
FrontPanelConnector(JP8/JP10)........................................................ 7
FanConnectors(FAN1/FAN2)............................................................... 7
Extended USBConnector(USB2/USB3/JP7)....................................... 8
EXT.GPIHeader(JP2).......................................................................... 8
ParallelPortHeader-EXT.PrinterPort(JP4)......................................... 9
FSBFrequencyRegulator(JP3)............................................................ 9
SelectDVIorPCI-Express X16model(J1)(defaultDVI)....................... 10
CONNECTORTOAUDIO(JP12)........................................................ 10
1.5.3AudioBoarddescription ..................................................................... 10
CONNECTORTOAUDIO(JP1)...........................................................11
JP2linkupdaughterboardJP2...........................................................11
AUX-INCONNECTOR(J1)..................................................................11
2XPCInstallation Guide........................................................................................ 12
2.1Installation.................................................................................................... 12
2.1.1Removethe Cover............................................................................... 12
2.1.2Removethe Rack ................................................................................ 13
2.2CPUand ICEInstallation ............................................................................. 14
2.2.1Removethe ICEModule...................................................................... 14

2.2.2InstalltheCPU..................................................................................... 16
2.2.3InstalltheICEModule........................................................................... 17
2.3DDR2Installation ......................................................................................... 18
2.4Cableand Rack Installation ........................................................................ 20
2.4.1InstallaSerialATAHDDCable............................................................ 20
2.4.2Installthe IDECable............................................................................. 20
2.4.3InstalltheRack..................................................................................... 21
2.5PeripheralInstallation ................................................................................ 22
2.5.1InstalltheSerialATAHDD.................................................................... 22
2.5.2Install anOpticalDrive.......................................................................... 22
2.6Accessories Installation .............................................................................. 25
2.6.1InstallPCIExpress x1/PCIExpressx16 Card...................................... 25
2.6.2InstallMiniPCICard............................................................................ 27
2.7FinalTouches .............................................................................................. 28
2.7.1Closethe ChassisCover..................................................................... 28
2.7.2InstallFrontFeet .................................................................................. 28
2.7.3Complete............................................................................................ 29
2.7.4InstallPowerAdapter........................................................................... 29
2.8XPCAccessories ......................................................................................... 30
2.9TechSupport............................................................................................... 30
2.ATechnicalNotes:ClearCMOSButton ........................................................ 30
2.BUse Hot-Key ................................................................................................ 31
3Driverand SoftwareInstallation......................................................................... 33
3.1MainboardCD Overview............................................................................. 33
3.1.1InstallMainboardSoftware................................................................... 34
Appendix................................................................................................................ 35
EntertheBIOS................................................................................................... 35
THEMAINMENU ............................................................................................... 36

STANDARDCMOSFEATURES .................................................................. 38
ADVANCEDBIOSFEATURES .................................................................... 41
ADVANCEDCHIPSETFEATURES ............................................................. 45
INTEGRATEDPERIPHERALS..................................................................... 49
POWERMANAGEMENTSETUP................................................................ 53
PNP/PCICONFIGURATIONS...................................................................... 57
PCHEALTHSTATUS.................................................................................. 59
FrequencyControl........................................................................................ 60
LOADFAIL-SAFEDEFAULTS..................................................................... 61
LOADOPTIMIZEDDEFAULTS..................................................................... 61
SETPASSWORD........................................................................................ 62
SAVE &EXITSETUP.................................................................................. 63
EXITWITHOUTSAVING.............................................................................. 63

1
English
<1.1XPCIntroduction
TheShuttleXPCistheoriginalhigh-performanceSmall FormFactor(SFF)computer.
Sincethefirstmodelwasintroducedin2001,theXPChasbecometheworld’sbest-
sellingSFF computerbrand.
EachShuttleXPCissoldasa”barebone” computer~chassis,powersupplyand
motherboard.Theusermustadd hisownprocessor,memory,drivesand,asapplicable,
expansion cards.TheXPChasbeendesignedtobeeasilyassembledand configured
directlybytheend user.Consumerscanchoosetobuypreconfigured,ready-to-run
XPC’saswell~alistofShuttle-authorizedvalue-addedresellerscanbefound atwww.
shuttle.com.
TheShuttleXPCowesitspopularitytoitsuniquecombination ofsmall-size,high-
performanceand nearuniversalcomponentcompatibility.However,unlike ordinary
desktop computers,ShuttleXPC’shave beenengineeredascompletesystems.
TheXPCconceptcanbesummarizedas:
Useofhigh-performance,industry-standardcomponents;Minimumsize possible,while
preservingcomponentcompatibilityand systemexpansion;Focuson quality~acom-
mitmenttoqualityconstruction,materialsand industrialdesign.
To meettheabove requirements,Shuttlehascreatedand patenteddozensofnew
technologies,includingtheIntegratedCoolingEngine(ICE), whichextend and en-
hancethepersonalcomputingexperiencewhilereducingheat, noiseand space
requirements.
Thankyou forchoosingtheShuttleXPC!
1Function Introduction

2
English
<1.2ModelSpecifications
Form Factor
ShuttleSmall Form Factor
Processor
PentiumM400/533MHzsystembuswith2MBL2cache
Celeron M400MHzsystembuswith1MBL2cache
Chipset
Intel915GM+ICH6M
Memory
240 pins400/533 DDR2DIMM X2withSingle&Dual-ChannelModeconfiguration
2GBperDIMM,Max.2GBcapacity,Supports256Mb,512Mband 1Gbtechnologies
forX8and X16 devices
Audio
H/WAudioCreative P17 (7.1-CHANNEL)
Ethernet
BCM5789 PCI-ELanController
10/100/1000 Mb/sLANoperation (1)PS2Keyboard/Mouse
IEEE 1394a
VIAVT6307,1394 OHCIv1.0compliant, Upto400Mb/sdatatransferrate
SerialATA
ICH6MintegratedSATA,TwoChannelUDMA150MB/sS-ATA
Onboardheaders&connectors
(1)ATA100 IDEconnector(2)Fanconnectors(1)AdjustCPUmodel
(1)Line_inheader(1)Power&resetheader(1)AUX_IN header
(2)SATAconnectors(2)1x5pinUSB2.0headers(1)GPIOheader
(1)2x5USB2.0header(1)Printerportheader(1)1394 header
(2)Powerconnector(1)PCI-EX1(1)PCI-EX16
(1)FSBFrequencyRegulator(1)SelectDVIorPCI-Express X16 model
PSU
Output:220W,Input: 100/240VAC,Active PFC,FCC,CE,BSMI, UL,TUV,
CBcertificated
Chassis
G5,Dimension:200 (W)x185 (H) x280 (L)
Bay:(1)3.5"bay(2)3.5"bays(internal) (1)5.25"bay

3
English
<1.3.1XPCFront
1.Ejectbutton
2.5.25”Bay
3.3.5”Bay
4.Reset
5.HDD LED
6.PowerLED
7.Powerswitch
8.Mic
9.Headphones
10.USBports
11.FireWire® 400 miniport
11
10
<1.3XPCExteriorDissection
Note:Shuttleoffers avarietyofdifferentXPCmodelsloadedwithvarious
options.Theillustration belowwill helpfamilarize you withtheincluded
featuresinyournewXPC.
98
45 6 7
3
21

4
English
<1.3.2XPCBack
1.SPDIFIN(Optical)
2.SPDIFOUT(Optical)
3.LINEINport
4.Front-out(R/L)
5.SideSurr (R/L)
6.Surround back(R/L)
7.Central/Bass 8.PS/2Mouse
9.ClearCMOSbutton 10.FireWire® 400 port
11.PS/2Keyboard 12.TV&S-Videoport
13.LANport14.USBports
15.VGAport16.DVIport
17.DCPowerInlet
A.Wireless LANperforation
B.Parallelportperforation
B
10 11 12 16
8
13
1714
Clear
COMS
15
A
1
2
3
4
5
7
6
9
1394
DC IN

5
English
Note:BundledAccessoriesmay differfromspecified.If thereareitems
missing,pleasecontactyourlocalauthorizedShuttledealer.
1
2
3
4
5
68
7
9
11
12
13
14
10
<1.4Accessories
1.ICEHeat-Pipe(1)
2.IDEcable<1to1>(1)
3.Extension PowerAdapter(1)
4.SerialATAcable(1)
5.Cableclip(1)
6.Adhesive (1)
7.Heatsinkcompound (1)
8.Frontfeet(2)
9.OpticalDrive ControlRod (1)
10.Screws
11.TV-outswitch(1)
12.Cabletie(2)
13.MotherboardCDDriver(32bits)(2)
14.ShuttleExtrasCD(1)
15.XPCUserGuide(1)
15

6
English
<1.5XPCMainboard
<1.5.1FD11 mainboardillustration
BCM57 89 KFB
PS/2Keyboard/Mouse s
Port
VGA&DVIPort
GigaLAN(GbE)&USB2.0 s
Port
EXT+12V,5V,3.3V
Connector-ATX1
EXT.PrintPort-JP4
TwoSerialATA
Connectors
FrontPanelConnector-JP10
IntelPentiumM
TWO240-pinDDR2
SDRAMDIMMSockets
OneIDEConnector
-IDE1
CREATIVEP17
AudioChip
FSBFrequency
Regulator-JP3
OnePCIExpress
x16Slot
BCM5789Chip
ITE8712FChip
ICH6MChip
Intel915GMChip
VT6307Chip
1394Port
12VDCPowerInlet-ATX2
ClearCMOSButton
ConnectorToAUDIO
board-JP12
USBHeader-USB3
USBHeader-USB2
USBHeader-JP7
S-VideoPort
FrontPanel
Connector-JP8
SelectDVIorPCI
Expressx16mode-J1
OnePCIExpress
x1Slot MiniPCIsolt
FANConnector-FAN2
FANConnector-FAN1
EXT.GPIHeader-JP2

7
English
<1.5.2JumperSettings
PinAssignments(JP8):
1=HDLED_PU2=GLEDA
3=HDLED4=GLEDB
5=Reset_SW6=Power_SW
7=GND 8=GND
9=NC10=KEY
@FrontPanelConnector(JP8/JP10)
HeaderJP8 canbeusedtoprovideoperation statussignalstothefrontdaughterboard.
Notethatthisisanalternative headertothe50pinsstreamlineheaderthatalsocon-
nectsthemotherboardtothefrontdaughterboard.
HeadersJP10 isusedtoconnectcabletofrontpanelconnectormountedon front-
panelorback-panel. Thefrontpaneliswheretheharddrive activitylights,resetbutton,
on/off button,computerpoweron light, USBconnectors,1394 connectors,and au-
dioheaders,arelocated.
1
-
+
RST
HLED
PWON
GLED
PWR LED
JP8
-+
-
+
2
3
JP10
1
2
49
50
@FanConnectors (FAN1/FAN2)
Themainboardprovidesfouronboard12V
coolingfanpowerconnectorstosupport
CPU(FAN1), System(FAN2)coolingfans.
Note:Bothcablewiringand typeofplugmay varydependingon thefan
maker.Keepinmind thattheredwiremustalwaysbeconnectedto
the+12Vheaderand theblack wiretotheground (GND)header.
1
PWM_CTRL
SPEED_SENSE
+12V
GND

8
English
PinAssignments(USB2/USB3): PinAssignments(JP7):
1=GND 1=VCC
2=GND 2=VCC
3=Data+3=Data0-
4=Data-4=Data1-
5=VCC 5=Data0+
6=Data1+
7=Ground
8=Ground
9=Key
10=N/C
@ExtendedUSBConnectors (USB2/USB3/JP7)
TheseheadersareusedtoconnectauxillaryUSBdevicestothemainboard.These
headersaredirectionaland will onlyallowUSBcablestobeconnectedinone
direction.
USB2/USB3
5
4
3
2
1
2
4
6
8
10
1
3
5
7
9
JP7
@EXT.GPIHeader(JP2)
TheGPIsupportsuser-definedfunction names.Thismeansthatthefunctionsinside
theplatform-independentcodecanbecalledanything.Theuserdefinesthelinking
function namesintheGPIheaderfile.
PinAssignments(JP2):
1=5V_DUAL
2=KEY
3=GND
4=GPI8
5=GPI11
JP2
12345

9
English
@ParallelPortHeader-EXT.PrinterPort(JP4)
ADB25 maleparallelportheaderislocatedneartherearpanelofthemainboard.
Theheaderisusedtoconnectaparallelportsocket(PC8)tothemainboard.The
parallelprinterportcanbepurchasedfromShuttleasanoptionalaccessory.
JP4
@FSBFrequencyRegulator(JP3)
531
642
JP3
531
642
400MHz
531
642
533MHz

10
English
<1.5.3AudioBoarddescription
@CONNECTORTOAUDIO(JP12)
2
JP12
1
2
49
50
@SelectDVIorPCI-Express X16 model(J1)(defaultDVI)
J1
DVI
J1: on
J1
PCI-E X16
J1:on
SPDIF-IN LINE-IN
SPDIF-OUT FRONT
SIDE-SURROUND REAR FRONT-CENTER
AUX-IN Connector- J1
Connector To
Main board- JP1
JP2 link up daughter board JP2

11
English
@AUX-INCONNECTOR(J1)
PortJ1(White)isusedtoconnectstereoaudioinputsfromaCD-ROM.
PinAssignments(J1):
1=AUX-INLeft
2=Ground
3=Ground
4=AUX-INRight
@CONNECTORTOAUDIO(JP1)
2
JP1
1
2
49
50
@JP2 linkup daughterboardJP2
J1
4
3
2
1
13579
2468
10
JP2