Siemens G2000T Mobile User manual

registering, 2000T 3000M,4110, ISDN
file:///F|/docs/English/DP/Bedienprozeduren/anmelden_4110_g3000m.htm[04.03.2010 12:56:45]
How do I register a G2000T/G3000 Mobile to a Gigaset 4110/4115 ISDN?
If you have GAP devices, please register these first.
You can register a maximum of eight cordless devices (handsets, data boxes, cordless TAEs and
SIMpad).
1. On the base station
Press the green illuminated key on the base station, the key flashes
steadily.
The base station is only ready for registration as long as the key flashes.
1. Registration: First time registration:
Confirm "Register?" with display key .
Skip to step 5.
Registering to another base
Press menu key .
Go to step 2.
2. Select "Settings" with display key or . Confirm with display key
.
3. Select "Register" with display key or . Confirm with display key
.
4. The base stations available will be displayed. Select one of them (for
instance Station 2) with display key or . Confirm with display
key .
5. Enter the four-digit system code (System Pin) for the base (this is set

registering, 2000T 3000M,4110, ISDN
file:///F|/docs/English/DP/Bedienprozeduren/anmelden_4110_g3000m.htm[04.03.2010 12:56:45]
to 0000 in the factory), and confirm with display key .
6. You will see for instance 'Reg.Procedure Base 2'.
7. For instance select "Int.11" with display key or . Confirm with
display key .
8. Registering is complete when the station you selected appears in the
display.