Siemens DMS8000 Technical manual

Building Technologies
Fire Safety & Security Products
DMS8000 MP4.10
Application &
Planning
For:
- MM8000Management Station
- MK8000 OPC Server
- MT8001 Management Terminal
- NK8000 Networks
With WW8000 Composer

Data and design subject to change without notice. / Supply subject to availability.
©2007 Copyright by
Siemens Switzerland Ltd
We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights
and undertakes not to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without our
prior express written authorization, nor to use it for any purpose other than for which it was delivered to him.

3
Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire Safety & Security Products 06.2007
About this document...............................................................................................5
Definitions of terms...............................................................................................10
1Products concept..................................................................................11
1.1 Danger management systems................................................................11
1.2 Connectivity –NK8000 networks............................................................12
1.2.1 NK8222, NK8223 or NK8225? ...............................................12
1.3 Configuration –WW8000 Composer......................................................14
2Management level configurations.......................................................15
2.1 MM8000 Management Station / MK8000 OPC Server configurations...15
2.1.1 Stand-alone configurations.....................................................15
2.1.2 Client/server configurations....................................................16
2.1.3 Distributed configurations.......................................................16
2.2 NK8000 network configurations..............................................................18
2.2.1 DMS8000 Multiple host configuration –CMSDL/IP................18
2.2.2 DMS8000 multiple host configuration –BACnet/IP................18
2.2.3 DMS8000 single-host configuration –support of dial-up
connections.............................................................................19
3Automation level configurations.........................................................20
3.1 Configurations supported by MM8000 / MK8000 ...................................20
3.2 Configurations supported by MT8001.....................................................22
3.3 Configuration types.................................................................................23
3.3.1 ISO1745 direct configuration..................................................23
3.3.2 Cerloop configuration .............................................................25
3.3.3 CS1115 / FC330A direct configuration...................................27
3.3.4 SI410/420 Sintony direct configuration...................................28
3.3.5 Video LAN configuration.........................................................30
3.3.6 Access control LAN configuration...........................................32
3.3.7 BACnet/IP LAN configuration.................................................34
3.3.8 Remote notification configuration...........................................35
3.3.9 OPC integration configuration ................................................36
3.3.10 NK822x serial configuration....................................................37
3.3.11 NK822x LAN/WAN configuration............................................40
3.3.12 NK8225 Ethernet Port with BACnet Gateway configuration ..43
3.4 NK8000 Networks...................................................................................46
3.4.1 Hardware configurations.........................................................46
3.4.1.1 Installation..............................................................48
3.4.2 Subsystem connectivity solutions...........................................50
3.4.2.1 Subsystems connected via RS232 interface .........50
3.4.2.2 Subsystems connected via RS485 interface .........51
3.4.2.3 Subsystems connected via LON interface.............51
3.4.2.4 Cerloop network connected via MK7022...............52
3.4.2.5 Power supply supervision and I/O-module
connected via I2C-bus............................................53
3.4.3 Parameterisation.....................................................................53
3.5 3rd party systems.....................................................................................54
4NK8000 Application examples.............................................................55
4.1 Local system...........................................................................................55
4.2 Distributed, campus-style systems .........................................................56
4.3 Wide area extension systems.................................................................57
4.4 Interactions..............................................................................................58
5NK8000 Network planning....................................................................60

4
Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire Safety & Security Products 06.2007
5.1 IT rules....................................................................................................60
5.1.1 Repeater rules........................................................................60
5.1.2 Cable lengths..........................................................................61
5.2 Dedicated safety and security networks .................................................61
5.2.1 Application example with commercial Ethernet components.62
5.2.2 Application example with Industrial Ethernet components.....63
5.2.3 Application example with OTN (Open Transport Network) ....65
5.3 Shared network.......................................................................................66
5.3.1 Information you need to give to your customer......................67
5.3.2 Security and Application Port numbers..................................67
5.4 Datalink characteristics...........................................................................68
5.4.1 LON ........................................................................................68
5.4.2 Serial interface (RSxxx)..........................................................68
5.4.3 Modems..................................................................................68
5.4.4 Ethernet..................................................................................69
5.4.5 FDDI / CDDI............................................................................70
5.4.6 xDSL.......................................................................................70
6Licenses.................................................................................................71
Appendix A –Network connectivity options......................................................72
Appendix B –Checklist.........................................................................................73

About this document
5
Siemens Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire & Security Products 06.2007
About this document
Scope
This document applies to the following Siemens FS products:
–MM8000 Management Station
–MK8000 OPC Server for Subsystems
–MT8001 Management Terminal
–NK8000 Networks
(With WW8000 Composer)
Target group
This documentation is intended for the following users:
Sales personnel Persons responsible for the sale of products, and service to customers. They
assess a customer’s desires and needs, then determine the appropriate products
and configurations in order to produce a quotation. They provide customers and
consultants with the basic information necessary to begin installation, configura-
tion, and commissioning activities.
Liability disclaimer
We have taken every possible care in preparing this manual. The contents of this
manual are revised regularly and brought up to latest standards. Nevertheless, we are
unable to provide any guarantee with regard to content, entirety or quality of the de-
tails contained in this manual.
We assume no liability for problems resulting from the use of this manual. The infor-
mation contained in this document may be changed without prior notice. We reserve
the right to publicize any such changes by issuing updated versions or new editions.

About this document
6
Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire Safety & Security Products 06.2007
Reference documents
The most recently released documentation for customers can be found in the STEP
Documentation Repository System released at SBT FS for end-users via the STEP
Web Client interface at the following address:
https://intranet.sbt.siemens.com/dbcom/en/db_porta/client.asp
The following describes one way to search and find a document:
To learn about other ways to locate a document, see DMS8000 Quick Reference
Guidelines for Search and Finding DMS Documents in STEP
(STEP #A6V10064704).
1. Click on the "STEP WEB Client" image.
2. Choose "04 Fire -3F" from the "Product Segment" box and select “Activate filter”.
3. Select “All”in the Documents section of the Quick Search page and select “Ad-
vanced Search”.
4. Enter the document number in the “Brochure No.”field (e.g. A6V10062415 or
007121) and press “Enter”.
Hint: For a specific version, specify the Market Package as *MPn.nn* in the “Classi-
fication No.”field (e.g. *MP4.10*).
Note: STEP provides no results when the number of found objects is equal to or
greater than 200.
Product and Document Name Document no. Date Last up-
date
Sales documents
MM8000
023 Product Datasheet A6V10062415_a 06.2007
MP4.10
053 System Description A6V10062417_a 06.2007
MP4.10
039 Sales Presentation A6V10062423_a 06.2007
MP4.10
074 Sales Guide A6V10062427_a 06.2007
MP4.10
074 Tender Specifications A6V10062419_a 06.2007
MP4.10
074 Offer Template A6V10062429_a 06.2007
MP4.10
MK8000
023 Product Datasheet A6V10062405_a 06.2007
MP4.10
039 Sales Presentation 007121_a 03.2003 MP1.10
074 Sales Guide 004970_b 03.2003 MP1.10
MT8001
023 Product Datasheet 006952_e 09.2005 MP3.15
053 System Description 008605_a 09.2005 MP3.15
039 Sales Presentation 007346_b 03.2003 MP1.01
074 Sales Guide 007286_c 09.2005 MP3.15
074 Tender Specifications 007788_c 09.2005 MP3.15
023 Demo Material 008078_b 09.2005 MP3.15

About this document
7
Siemens Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire & Security Products 06.2007
NK8000
023 Product Datasheet NK8223 A6V10062431_a 06.2007
MP4.10
023 Product Datasheet NK8222 A6V10062433_a 06.2007
MP4.10
023 Product Datasheet NK8225 A6V10062445_a 06.2007
MP4.10
023 Product Datasheet NK8225
PICS A6V10062449_a
06.2007
MP4.10
023 Product Datasheet NE8000 A6V10062421_a 06.2007
MP4.10
023 Product Datasheet NK8021 A6V10075902_a 06.2007
MP4.10
039 Sales Presentation A6V10062435_a 06.2007
MP4.10
074 Sales Guide A6V10062439_a 06.2007
MP4.10
Technical documents
MM8000
073 Release Notes MP4.10 A6V10062455_a 06.2007
MP4.10
073 Release Notes MP3.20-03 A6V10075048_a 06.2007 MP3.20-03
073 Release Notes MP3.20-02 A6V10067812_a 04.2007 MP3.20-02
073 Release Notes MP3.20-01 009421_b 12.2006 MP3.20-01
073 Release Notes MP3.15 008901_b 09.2005 MP3.15
073 Release Notes MP3.12 008899_a 06.2005 MP3.12
073 Release Notes MP3.10 008601_b 12.2004 MP3.10
073 Release Notes MP2.31 008091_a 02.2004 MP2.31
073 Release Notes MP2.30 007791_a 10.2003 MP2.30
073 Release Notes MP2.20 007145_b 7.2003 MP2.20
073 Release Notes MP2.10 007090_a 04.2003 MP2.10
048 Autronica BSxx, ICC ad-on 008750_a 06.2006 MP3.20
048 LIST SCU 2000, ICC add-on 009248_a 06.2006 MP3.20
048 MAXSYS PC601, ICC add-on 008751_a 06.2006 MP3.20
048 CP100, ICC add-on 009848_a 06.2006 MP3.20
048 R Card M5 ICC add-on A6V10064742_a 06.2007
MP4.10
048 MODBUS ICC add-on A6V10067800_a 06.2006 MP3.20
048 CDDL-CDSF ICC add-on A6V10067787_a 06.2006 MP3.20
048 DLCS ICC add-on A6V10067792_a 06.2007
MP4.10
048 GEUTERBRUECK ICC add-on A6V10067796_a 06.2007
MP4.10
029 Operation A6V10062409_a 06.2007
MP4.10
022 Operation Quick Reference A6V10067779_a 06.2007
MP4.10
048 Installation, Configuration and
Commissioning (ICC) A6V10062413_a
06.2007
MP4.10
022 Configuration Quick Reference A6V10075052_a 06.2007
MP4.10
019 Localisation - Engineering guide A6V10062459_a 06.2007
MP4.10
MK8000
048 Release Notes for MP4.10 A6V10062459_a 06.2007
MP4.10
073 Release Notes for MP3.20 009423_a 06.2006 MP3.20
073 Release Notes for MP3.10 008603_a 12.2004 MP3.10
073 Release Notes for MP1.31 008093_a 02.2004 MP1.31
073 Release Notes for MP1.30 007875_a 10.2003 MP1.30
073 Release Notes for MP1.20 007143_a 07.2003 MP1.20
Release Notes for MP1.10 007076_a 04.2003 MP1.10
048 Installation, Configuration and
Commissioning (ICC) A6V10062407_a
06.2007
MP4.10

About this document
8
Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire Safety & Security Products 06.2007
MK8000 Interface Specifications
019 MK8000 OPC Server 004971_h 06.2006 MP3.20
019 CS11 EP5 004974_e 02.2004 MP1.31
019 CS11 EP7 007546_b 02.2004 MP1.31
019 FC700A 008596_a 12.2004 MP3.10
019 CS1115 009843_a 06.2006 MP3.20
019 FC330A 009842_a 06.2006 MP3.20
019 CS440 004973_b 10.2003 MP1.30
019 CS4 007078_b 10.2003 MP1.30
019 CZ12 007079_b 10.2003 MP1.30
019 CZ10 007080_b 10.2003 MP1.30
019 STT11 007081_c 10.2003 MP1.30
019 DMS7000 007082_b 10.2003 MP1.30
019 GW-20/NK8210 007122_b 10.2003 MP1.30
019 GW-21 007124_b 10.2003 MP1.30
019 MK7022 007125_b 10.2003 MP1.30
019 CK11 EP5 007126_b 02.2004 MP1.31
019 CK11 EP7 007129_b 02.2004 MP1.31
019 SK11 007127_b 10.2003 MP1.30
019 NK8223 (CDI-Net) 007154_b 10.2003 MP1.30
019 CS6 Guarto 007545_b 02.2004 MP1.31
019 SI410 Sintony 008597_a 12.2004 MP3.10
019 CC60 007547_b 10.2003 MP1.30
019 NK822x 007879_b 02.2004 MP1.31
019 CF9000 007880_a 10.2003 MP1.30
019 SIMATRIX 007881_a 02.2004 MP1.31
019 Philips/Burle CCTV 008085_a 02.2004 MP1.31
019 SiPass 008607_a 03.2006 MP3.20
019 TELSCAN 009426_a 03.2006 MP3.20
019 SIMATRIX 009427_a 03.2006 MP3.20
019 SISTORE 009428_a 03.2006 MP3.20
019 Video Camera 009429_a 03.2006 MP3.20
MT8001
073 Release Notes for MP3.15 008604_a 09.2005 MP3.15
073 Release Notes for MP1.20 008094_a 02.2004 MP1.20
073 Release Notes for MP1.10 007789_a 10.2003 MP1.10
073 Release Notes for MP1.00 006914_a 03.2003 MP1.00
048 Operation 006611_e 09.2005 MP3.15
022 Operation Quick Reference 008088_a 09.2005 MP3.15
048 Installation, Configuration and
Commissioning (ICC) 006647_e
09.2005 MP3.15
019 Localisation - Engineering guide 008083_b 09.2005 MP3.15
016 History Analysis Installation 006962_b 03.2003 MP1.00

About this document
9
Siemens Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire & Security Products 06.2007
NK8000
073 Release Notes for MP4.10 A6V10062457_a 06.2007
MP4.10
073 Release Notes for MP3.20-01 009422_b 12.2006 MP3.20-01
073 Release Notes for MP3.15 008902_a 09.2005 MP3.15
073 Release Notes for MP3.10 008602_a 12.2004 MP3.10
073 Release Notes for MP2.11 008092_a 02.2004 MP2.11
073 Release Notes for MP2.10 007793_a 01.2004 MP2.10
048 Installation, Configuration and
Commissioning (ICC) A6V10062437_a
06.2007
MP4.10
DMS8000 and Composer
023 Composer Datasheet A6V10062403_a 06.2007
MP4.10
054 Composer Technical Manual A6V10062401_a 06.2007
MP4.10
022 Composer Quick Reference A6V10067783_a 06.2007
MP4.10
048 Network and Subsystems Con-
nectivity Guide A6V10062425_a
06.2007
MP4.10
048 Access Control Connectivity A6V10062451_a 06.2007
MP4.10
048 Video Connectivity A6V10062457_a 06.2007
MP4.10
048 OPC Connectivity A6V10065253_a 06.2007
MP4.10
048 Graphical Map Configuration A6V10062441_a 06.2007
MP4.10
022 Graphical Map Config. Quick
Ref. A6V10069550_a
06.2007
MP4.10
016 Migration from DMS7000 A6V10062443_a 06.2007
MP4.10
MK8000 OPC Server:
In addition to the documents available through the STEP documentation system, the
OPC Foundation publishes a number of other documents that are necessary and/or
useful for understanding the underlying principles used in the MK8000 OPC Server.
These PDF documents can be downloaded from www.opcfoundation.org. Select
“Downloads”on the main page of the site. See “Comments”below for navigation de-
tails. *
*Registration may be required.
Name Date Comments
OPC DA 2.05a (Data Access Interface Specifications) 2002-06-28 OPC site: “Specifications”
Also available in STEP
#004971_h
OPC via DCOM with XP SP2 2006-03-30 OPC site: “White Papers”
Also available in STEP
#004971_h
Training
Siemens Fire & Security Products offers a comprehensive training program. You can
find information about courses in the Siemens Intranet.
Modification index
Current version Date Notes
A6V10063710_a_en 06.2007 6th Application & Planning edition for all Siemens DMS, Network,
and 3rd party products

Definitions of terms
10
Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire Safety & Security Products 06.2007
Definitions of terms
Hierarchical level concept A Danger Management System can be structured into 3 hierarchical levels:
Management level (central evaluation)
The majority of the human interface takes place at this level. Standard computers running a variety of dis-
play, management, and analysis software packages usually provide the functionality.
Automation level (local evaluation and data communication)
The majority of the real-time control functions are carried out at this level. The devices are self-contained
controllers and communication products distributed as required within the building.
The local evaluation part consists mainly of the control units.
The data communication part consists of the transmission path between the local control units and the
terminal system.
Field level (data acquisition)
This level contains the devices that connect to the physical items of a plant, including sensors and actua-
tors. Products in this level are simple in nature, but may provide some local control and safety-functions.
At this level we can find elements as:
-Automatic detectors
-Manual call points
-Signalling devices, contacts
-Control elements
The individual elements are usually combined in alarm zones and are connected to the control unit.
Automation level configu-
ration
The Automation level configuration relates to the variety of possible connections of subsystems (control
panels, such as AlgoRex) via possible network structures to the DMS (connectivity of automation level
subsystems to management level).
BAU (Siemens) Building Automation products.
DMS Danger Management System.
FS (Siemens) Fire Safety and Security products.
Head end
The head end of a system is the Management Station on the management level providing the User Interface
to the final user.
HVP (Siemens) Heating and Ventilation products.
LAN Local area network.
Management level con-
figuration
The Management level configuration relates to the configuration possibilities of DMS Client/Server structure
itself, without taking into account any subsystem connectivity. The DMS acts as a management level gate-
way providing downstream connectivity to the automation, and exposing data upstream via the user inter-
face.
SES (Siemens) Security Systems.
Total Building Solutions
(TBS)
TBS is a combined Market Offering of the Divisions BAU, FS and SES with the scope to describe the Sie-
mens Building Technologies (SBT) approach to the integrated building management systems.
WAN Wide area network.

Products concept
11
Siemens Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire & Security Products 06.2007
1 Products concept
One of Siemens Building Technologies’(SBT) primary goals is to be able to provide
complete integration solutions to our customers. Complete integration includes fire
safety, security, and building automation systems built by various Siemens and third-
party suppliers.
As the needs and expectations of the market continue to advance at the pace of tech-
nology, SBT aims to provide products that meet those needs and expectations.
Siemens’family of products are designed to serve the market for small to medium-size
local systems, campus-size configurations (LAN applications), and for geographical
networks (WAN applications). Additionally, in cases where another supplier is making
the integration, Siemens provides open system solutions enabling integration of our
subsystems.
See the following to determine which product or combination of products best suit your
customer’s needs.
1.1 Danger management systems
Siemens offers the following Danger Management System (DMS) solutions:
MM8000 Management Station:
The MM8000 provides integrated management and handling, decentralised system
operation and centralised maintenance. The MM8000 is designed to replace older
management stations such as LMSmodular, LMS6, and DMS7000.
MM8000 also offers the following advantages:
–Flexibility –The system can be built and configured to fit different situations.
–Scalability –MM8000 will easily grow to support more subsystems, disciplines,
and stations as needed.
–Reliability –The MM8000 is based on the concept of autonomous subsystems
and distributed control. Furthermore, redundant configurations can be imple-
mented.
–Security –The operator will have access to exactly what is defined.
–3rd Party integration –The MM8000 architecture allows for open system solu-
tions and for the integration of 3rd party devices.
MK8000 OPC Server for Subsystems:
The MK8000 OPC Server product concept provides open system solutions to our
customers, enabling our subsystems to be integrated into 3rd party management
systems.
The objective is to offer the OPC Data Access (DA) Server product in parallel with
complete offerings including our MM8000 management station software.
The OPC DA Server product allows us to technically integrate FS subsystems into
building automation unit head-ends, thereby supporting the SBT Total Building So-
lutions offering.

Products concept
12
Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire Safety & Security Products 06.2007
MT8001 Management Terminal:
The MT8001 Management Terminal provides a common user interface to Fire and
Intrusion subsystems of different generations. The user interface is designed for in-
tuitive operation by non-technical users.
MT8001 provides basic management station functionality to those users who would
not normally have access to such a device. And it provides this functionality at the
most convenient location for personnel trusted with the responsibility of reacting to
security events. These people may be security guards, but more commonly, they
may also be receptionists, concierges, janitors, or general technical service person-
nel.
For these reasons, the operation (or user interface) of MT8001 has been kept as
simple as possible.
1.2 Connectivity –NK8000 networks
NK8000 connects various subsystems over TCP/IP and Ethernet or BACnet/IP and
Ethernet with the MM8000 and the MK8000 systems, and offers serial connectivity to
MM8000, MK8000, and MT8001 systems.
The following make up the NK8000 product family:
NK8223 Ethernet Port for DMS8000 systems
NK8222 Ethernet Port for a single subsystem for DMS8000 systems
NK8225 Ethernet Port with BACnet Gateway for DMS8000 systems
1.2.1 NK8222, NK8223 or NK8225?
The NK822x Ethernet Ports are used to connect local and distributed safety and secu-
rity devices to the NK8000 network. The NK822x port provides a first level of centrali-
sation, and acts as a secure communication partner for DMS8000. All ports come with
optional housing solutions with autonomous power supplies. Additionally, the NK8223
/ NK8225 can be serially connected to a local management station.
The NK8222 allows connection of a single safety or security subsystem to the NK8000
network, and is best suited for distributed systems or geographical networks where
only one subsystem has to be connected to a remote management system (such as a
bank application: centralisation of security systems of branches).
The NK8223 allows connection of multiple SBT and 3rd party subsystems to the
NK8000 network, and is best suited for local systems, campus-size or wide area ex-
tension systems, where more than one subsystem has to be connected, or system ex-
tensions with additional subsystems are expected.
The NK8225 offers the same connectivity capabilities as the NK8223. In addition, it
provides BACnet connectivity between NK8225s for network-wide interactions and
provides BACnet gateway functionality for CS11 AlgoRex, FC700A, and SIG-
MASYS/D100 fire detection systems, and Guarto CS6 and SI410/420 Sintony intru-
sion detection systems to DMS8000 hosts.

Products concept
13
Siemens Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire & Security Products 06.2007
NK8222
1 serial connection supporting a single fire, gas, intrusion detection, CCTV, or a
digital I/O system
Or
LON adapter for connecting 1 CS6 Guarto intrusion detection system
NK8223
Up to 4 serial connections supporting fire, gas, and intrusion detection systems,
CCTV, and digital I/O’s
And
LON adapter for connecting up to 4 CS6 Guarto intrusion detection systems
NK8225
Same capabilities as NK8223
BACnet connectivity (native protocol conversions) supporting CS11 AlgoRex,
FC700A, and SIGMASYS/D100 fire, and CS6 Guarto and SI410/420 Sintony
intrusion detection systems
NK8222, NK8223
TCP/IP on Ethernet connectivity for connection to local and remote management
stations. Transport protocol CMSDL/IP or CEI79-5 featuring 64-bit encryption
(FEAL algorithm) for high security banking applications, and support of switched
lines;
Simultaneous multiple host connectivity (up to four) using CMSDL/IP protocol (with-
out encryption);
Upstream serial connectivity to a local management station (MM8000 / MK8000 /
MT8001) using an RS232 line via CMSDL serial protocol;
The upstream devices (MM8000 or MK8000) must be equipped with the NS8210
Network Driver for TCP/IP on Ethernet connectivity or with the NS8012 CDI-Net
Driver for serial connectivity.
NK8225
Same as NK8222, NK8223 above
BACnet/IP on Ethernet connectivity for connection to local and remote DMS8000
management stations;
Conversion of native protocols (CS11 AlgoRex,, FC700A, SIGMASYS/D100,
SI410/420 Sintony, and CS6 Guarto) to BACnet;
Enhanced network-wide interaction machine*supporting logical combinations be-
tween subsystems connected to other NK8225s (CS11 AlgoRex, FC700A, SIG-
MASYS, D100, CS6 Guarto, Sintony SI410/420)
The DMS8000 upstream devices (MM8000 or MK8000) must be equipped with the
NS8011 Network Driver for BACnet/IP on Ethernet connectivity, the NS8210 Net-
work Driver for TCP/IP on Ethernet connectivity, or with the NS8012 CDI-Net Driver
for serial connectivity.
*See more about interactions in section 4.4.

Products concept
14
Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire Safety & Security Products 06.2007
NK822x
Direct support for local digital I/O with up to 16 non-supervised inputs and 8 relay
outputs;
Interaction machine supporting logical combinations between locally connected
subsystems (CS11 AlgoRex, SIGMASYS/D100, SI410/420 Sintony, CS6 Guarto,
CF9000, Philips-Burle);
Optional dial-up connectivity via modem for wide area extension systems.
1.3 Configuration –WW8000 Composer
MM8000, MK8000, MT8001, and NK8000 can be configured in a fast, safe, and easy
way with Composer (using the subsystem tool concept). Composer is the common
configuration tool for all DMS8000 products.
For more information on Siemens DMS products, refer to the “Reference docu-
ments”section in “About this document”on page 6.

Management level configurations
15
Siemens Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire & Security Products 06.2007
2 Management level configurations
This section lists the management configuration types that are supported in DMS8000
MP4.10 for:
–MM8000 Management Station
–MK8000 OPC Server
–NK8000 Networks
To see network connectivity options, refer to Appendix A.
2.1 MM8000 Management Station / MK8000 OPC Server configura-
tions
The following management configuration types are supported in MM8000/MK8000:
–Stand-alone station
–Client/server configuration
–Distributed configuration which may include SiPass access control and/or CCTV
–Redundant solution configuration
2.1.1 Stand-alone configurations
Characteristics:
–Stand-alone station that contains all software levels (Client and Server);
–Provides a straightforward solution for small and medium-size systems.
Fig. 1 MM8000 or MK8000 stand-alone configuration (MM8000 shown)

Management level configurations
16
Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire Safety & Security Products 06.2007
2.1.2 Client/server configurations
Characteristics:
–Distributed client and server communicate via TCP/IP connection;
–Provides a straightforward solution for small and medium-sized systems.
Fig. 2 MM8000 / MK8000 client/server configuration TBS
2.1.3 Distributed configurations
Characteristics:
–Software architecture distributed on different hardware;
–Each station is specialised for a single function;
–Optional redundancy solution with dual servers to prevent service interruption.
MM8000: The client provides the user interface. The server handles all the func-
tionality provided by MM8000, and holds the configuration database. The FEP
(Front-end processor) provides the drivers for the different network connections
(such as Cerloop, NK8000, etc.);
New! MM8000 now provides OPC client functionality for OPC Data Access
Server subsystems.
MK8000: The server provides OPC functionality while the FEP (Front-end proc-
essor) provides “background”functionality.
This architecture provides the highest performance solutions for large systems
that require both multiple FEPs and coordinated management.

Management level configurations
17
Siemens Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire & Security Products 06.2007
The following are examples of distributed configurations:
Fig. 3 MM8000 / MK8000 redundant configuration with dual servers
Note: For technical details regarding a redundancy configuration solution, please con-
tact customer support.
Fig. 4 MM8000 / MK8000 + SiPass distributed configuration
Note: MM8000 / MK8000 and SiPass servers may reside separately.

Management level configurations
18
Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire Safety & Security Products 06.2007
2.2 NK8000 network configurations
NK8000 safety and security networks are supported by MM8000 and MK8000 MP4.10
in the configurations described in section 2.1 (up to four hosts). Additionally, the
NK8225 supports BACnet subsystem connectivity for up to fours hosts for MM8000 /
MK8000.
2.2.1 DMS8000 Multiple host configuration –CMSDL/IP
Characteristics:
–Communication layer equipped with NS8210 Network driver
–Up to four hosts
Fig. 5 NK8225 DMS8000 CMSDL multiple host configuration
2.2.2 DMS8000 multiple host configuration –BACnet/IP
Characteristics:
–Communication layer equipped with NS8011 BACnet Network Driver for
DMS8000
–Conversion of native protocols to BACnet (CS11 AlgoRex, FC700A, SIG-
MASYS/D100, SI410/420 Sintony, CS6 Guarto) in NK8225
–Up to four DMS8000 hosts
Fig. 6 NK8225 DMS8000 BACnet multiple host configuration
Note: CS11 AlgoRex connectivity direct or via Cerloop.

Management level configurations
19
Siemens Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire & Security Products 06.2007
2.2.3 DMS8000 single-host configuration –support of dial-up connections
Characteristics:
–Communication layer equipped with NS8210 Network driver and modem(s)
–NK822x dial-ups as primary (no Ethernet connection) or secondary (in case net-
work is down) via PSTN
Fig. 7 NK8000 dial-up configuration

Automation level configurations
20
Building Technologies DMS8000_Application_Specification_&_Planning_MP4.10_A6V10063710_a_en
Fire Safety & Security Products 06.2007
3 Automation level configurations
3.1 Configurations supported by MM8000 / MK8000
The MM8000 / MK8000 MP4.10 support the following:
Automation level configuration types
–Direct RS-232
–Cerloop
–CDI-Net
–NK8000
–Direct LAN
Network components
–NK822x
–MK7022
–GW-21
–GW-20
Control units
Note: For control unit versions, see MM8000 MP4.10 Release Notes (STEP
#A6V10062455)
Fire detection systems:
–CS11 AlgoRex
–FC700A
–CS1115 (FC330A)
–CZ10
–STT11 (Système de Télécommande et Télésignalisation)
–STT20
–STT2410
–SIGMASYS / D100
Intrusion detection systems:
–CS4
–SI410/420 Sintony
–CS440
–CZ12
–CS6 Guarto
Gas detection systems:
–CC60
Video systems:
–SIMATRIX, SIMATRIX NEO video crossbars
–SISTORE AX, CX, MX (including NVR*), MXpro, SX Digital Video Recorders
(DVRs)
–TELSCAN
–IP cameras (fixed) equipped with:
–CCIS1337-LP / CFVA-IP / CVVA-IP
*Network Video Recorder