STI Stopper Station Series User manual

Stopper Station Series
SS-2002F Push Buttons
Key-to-Reset
We protect the things that protect you.®
ADA
for operation

III. INSTRUCTIONS
Housing Removal.......................................................................................Page 2
Backbox Preparation..................................................................................Page 3
Wire Connections ......................................................................................Page 4
Installation.................................................................................................Page 5
Key Reset Procedure..................................................................................Page 6
Product Dimensions...................................................................................Page 7
Installation and Service Instructions
STOPPER STATION SERIES SS-2002F PUSH BUTTON
II. CONTENTS LIST
I. GENERAL
QTY. DESCRIPTION
1 Push Button Housing Assembly
1 18061 Reset Key
1 Allen Head Screw #8-32 x 3/8 in.
1 Allen Wrench 3/32 in.
4 Screw 3.5mm x 13mm
2 Screw #6-32 x 1 in.
1 Ground Screw
4 #6 x 1 1/4 in. SS SMS
4 Plastic Screw Anchor
1 71100A Surface Backbox
Product Dimensions
Switch Rating
See page 7
2 Form C contacts
125/250 VAC, 10 A, 1/2 HP
30 VDC, 6 A
This push button has been tested according to UL38 and UL2017. Manual fire alarm stations
are listed in UL category UNIU and non-fire alarm initiating devices are listed in UL category
UEHX. It is important to read, understand and follow all instructions provided with this product.
It is the installer’s responsibility to comply with NFPA72 and 101, NEC, mounting specifications
according to ADA and other applicable fire and electrical codes. After installation and testing are
complete, provide a copy of this manual to all personnel responsible for testing and maintenance
of this product. To avoid electrical shock, DO NOT attempt to install this product when power is
on. For outdoor usage, STI-6525 or STI-6535 Mini Weather Stopper Cover is required.
SAFETY NOTICE TO INSTALLERS AND USERS

- 3 -
3/32” HEX WRENCH
(1) PROVIDED
ALLEN HEAD SCREW
#8-32 x 3/8 in.
(1) PROVIDED
SWITCH HOUSING
BUTTON AND SWITCH ASSEMBLY
REMOVE SCREW. PULL BOTTOM OF HOUSING OUT AND LIFT UP UNTIL
TABS ARE RELEASED FROM SLOTS IN TOP OF SWITCH ASSEMBLY.
HOUSING REMOVAL

Field drilling for conduit entry is required.
Locations shown also apply to opposite, parallel side.
BACKBOX PREPARATION
(NOT INCLUDED WITH FLUSH MOUNT COVERS)
3.18 (81mm)
1.62 (41mm)
3.25 (82mm)
4.87
(124mm)
PNEUMATIC OPERATED TIMER, OPENS
OR CLOSES CIRCUIT AFTER TIME DELAY.
NO ELECTRICITY TO OPERATE
10 AMP, FOR C CONTACTS
IDEAL FOR SECURITY APPLICATIONS
CORROSION RESISTANT BODY
ADJSTABLE TIME RANGE
PRODUCT DIMENSIONS
CAN BE INSTALLED ON ANY
EXISTING SINGLE GANG BOX
FAST
SLOW
TIME RANGE ADJUSTMENT SCREW
TURN COUNTER CLOCKWISE TO
INCREASE TIMER SPEED.
ADJUSTMENT RANGE - 2 TO 60 SECONDS
FACTORY SETTING - 25 TO 45 SECONDS
SWITCH DATA
RESOLUTION: 2 TO 60 SECONDS
ACCURACY: 10% REPEAT ACCURACY
POWER: NONE TO OPERATE, SWITCHES
UP TO 10 AMPS @ 240 VOLTS
RESET: AT CYCLE END
LIFE CYCLES: 1,000,000
NC
NO
PNEUMATIC TIMER
SWITCH ASSEMBLY
FAST
SLOW
NC
NO
PNEUMATIC TIMER
SWITCH ASSEMBLY
BACKPLATE WITH MOLDED-IN
STAINLESS STEEL INSERT
SWITCH HOUSING MOLDED OF
POLYCARBONATE. CHOOSE RED,
GREEN, YELLOW, WHITE OR BLUE.
ALLEN HEAD
LOCKING SCREW
AND WRENCH
ALSO CAN BE INSTALLED ON ANY
EXISTING SINGLE GANG BOX
BUTTON AND SWITCH ASSEMBLY
19015 WRENCH
(1) PROVIDED
FIGURE C
SURFACE BOX
INSTALLATION
19011 SCREW ALLEN HEAD
#8-32 x 3/8 (1) PROVIDED
10271 SWITCH HOUSING
RED, GREEN, YELLOW,
WHITE AND BLUE
1.62 in.
(41mm)
3.25 in. (82mm)
4.87 in.
(124mm)
PRODUCT DIMENSIONS
1.58 in.
(40mm)
1.375 in.
(35mm)
1.62 in.
(41mm)
3.25 in.(82mm)
4.87 in.
(124mm)
PRODUCT DIMENSIONS
1.56 in.
(40mm)
"A"
TO PROVIDE ADEQUATE CLEARANCE FOR CONTACTS,
(#0, #1, #3, #4) INSTALLATION
MAY REQUIRE: SUB-102722-COLOR SPACER
1.62 in.
(41mm)
3.25 in.(82mm)
4.87 in.
(124mm)
1.58 in.
(40mm)
"A"
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES
J
J
J
J
HSWITCH BACKPLATE
MOUNTING HOLES
BOX MUST BE INSTALLED WITH
ARROWS POINTING UPWARD
THESE HOLES MUST BE
DRILLED OUT USING A
5/32 in. DRILL BIT
H
DRILL POINT LOCATIONS PROVIDED
TOP AND BOTTOM FOR 1/2 in.
CONDUIT FITTINGS.
DRILL AS NEEDED
DRILL POINT LOCATIONS PROVIDED
TOP AND BOTTOM FOR 1/2 in.
CONDUIT FITTINGS.
DRILL AS NEEDED
KIT-71100A BOX (SURFACE MOUNT)
RED, GREEN, YELLOW, WHITE AND BLUE
19039 SCREW #6 x 1-1/4 in.
(4) PROVIDED
PNEUMATIC TIMER MODEL
WITH PROVIDED
SURFACE BACKBOX
19060 SCREW #6-32 x 1 in.
(2) PROVIDED
BUTTON AND SWITCH ASSEMBLY
19021 GROUND SCREW
19018 ANCHOR
(4) PROVIDED
THIS VIEW FOR PAGE 6
DRILL (4)
3/16 DIA. HOLES
DRILL POINT LOCATIONS PROVIDED
TOP AND BOTTOM FOR 1/2 in.
CONDUIT FITTINGS.
DRILL AS NEEDED
KIT-71100A BOX (SURFACE MOUNT)
RED, GREEN, YELLOW, WHITE AND BLUE
SCREW #6 x 1-1/4 in.
(4) PROVIDED
PNEUMATIC TIMER MODEL
WITH PROVIDED
SURFACE BACKBOX
SCREW #6-32 x 1 in.
(2) PROVIDED
BUTTON AND SWITCH ASSEMBLY
GROUND SCREW
ANCHOR
(4) PROVIDED
THIS VIEW FOR PAGE 6
DRILL (4)
3/16 DIA. HOLES
BACKPLATE WITH MOLDED-IN
STAINLESS STEEL INSERT
SWITCH HOUSING MOLDED
OF POLYCARBONATE. CHOOSE
RED, GREEN, YELLOW,
WHITE OR BLUE.
ALLEN HEAD
LOCKING SCREW
AND WRENCH
DRILL POINT LOCATIONS PROVIDED
TOP AND BOTTOM FOR 1/2 in.
CONDUIT FITTINGS.
DRILL AS NEEDED
KIT-71100A BOX (SURFACE MOUNT)
RED, GREEN, YELLOW, WHITE AND BLUE
19039 SCREW #6 x 1-1/4 in.
(4) PROVIDED
PNEUMATIC TIMER MODEL
WITH PROVIDED
SURFACE BACKBOX
19060 SCREW #6-32 x 1 in.
(2) PROVIDED
19021
GROUND SCREW
19018 ANCHOR
(4) PROVIDED
DRILL (4)
3/16 DIA. HOLES
.728 in.
(18.49mm)
2.4 in.
(60.96mm)
3.218 in.
(81.74mm)
4.132 in.
(104.95mm)
4.83 in.
(122.68mm)
1.578 in.
(40.08mm)
3.18 (81mm)
1.62 (41mm)
3.25 (82mm)
4.87
(124mm)
PNEUMATIC OPERATED TIMER, OPENS
OR CLOSES CIRCUIT AFTER TIME DELAY.
NO ELECTRICITY TO OPERATE
10 AMP, FOR C CONTACTS
IDEAL FOR SECURITY APPLICATIONS
CORROSION RESISTANT BODY
ADJSTABLE TIME RANGE
PRODUCT DIMENSIONS
CAN BE INSTALLED ON ANY
EXISTING SINGLE GANG BOX
FAST
SLOW
TIME RANGE ADJUSTMENT SCREW
TURN COUNTER CLOCKWISE TO
INCREASE TIMER SPEED.
ADJUSTMENT RANGE - 2 TO 60 SECONDS
FACTORY SETTING - 25 TO 45 SECONDS
SWITCH DATA
RESOLUTION: 2 TO 60 SECONDS
ACCURACY: 10% REPEAT ACCURACY
POWER: NONE TO OPERATE, SWITCHES
UP TO 10 AMPS @ 240 VOLTS
RESET: AT CYCLE END
LIFE CYCLES: 1,000,000
NC
NO
PNEUMATIC TIMER
SWITCH ASSEMBLY
FAST
SLOW
NC
NO
PNEUMATIC TIMER
SWITCH ASSEMBLY
BACKPLATE WITH MOLDED-IN
STAINLESS STEEL INSERT
SWITCH HOUSING MOLDED OF
POLYCARBONATE. CHOOSE RED,
GREEN, YELLOW, WHITE OR BLUE.
ALLEN HEAD
LOCKING SCREW
AND WRENCH
ALSO CAN BE INSTALLED ON ANY
EXISTING SINGLE GANG BOX
BUTTON AND SWITCH ASSEMBLY
19015 WRENCH
(1) PROVIDED
FIGURE C
SURFACE BOX
INSTALLATION
19011 SCREW ALLEN HEAD
#8-32 x 3/8 (1) PROVIDED
10271 SWITCH HOUSING
RED, GREEN, YELLOW,
WHITE AND BLUE
1.62 in.
(41mm)
3.25 in. (82mm)
4.87 in.
(124mm)
PRODUCT DIMENSIONS
1.58 in.
(40mm)
1.375 in.
(35mm)
1.62 in.
(41mm)
3.25 in.(82mm)
4.87 in.
(124mm)
PRODUCT DIMENSIONS
1.56 in.
(40mm)
"A"
TO PROVIDE ADEQUATE CLEARANCE FOR CONTACTS,
(#0, #1, #3, #4) INSTALLATION
MAY REQUIRE: SUB-102722-COLOR SPACER
1.62 in.
(41mm)
3.25 in.(82mm)
4.87 in.
(124mm)
1.58 in.
(40mm)
"A"
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES
J
J
J
J
HSWITCH BACKPLATE
MOUNTING HOLES
BOX MUST BE INSTALLED WITH
ARROWS POINTING UPWARD
THESE HOLES MUST BE
DRILLED OUT USING A
5/32 in. DRILL BIT
H
DRILL POINT LOCATIONS PROVIDED
TOP AND BOTTOM FOR 1/2 in.
CONDUIT FITTINGS.
DRILL AS NEEDED
DRILL POINT LOCATIONS PROVIDED
TOP AND BOTTOM FOR 1/2 in.
CONDUIT FITTINGS.
DRILL AS NEEDED
KIT-71100A BOX (SURFACE MOUNT)
RED, GREEN, YELLOW, WHITE AND BLUE
19039 SCREW #6 x 1-1/4 in.
(4) PROVIDED
PNEUMATIC TIMER MODEL
WITH PROVIDED
SURFACE BACKBOX
19060 SCREW #6-32 x 1 in.
(2) PROVIDED
BUTTON AND SWITCH ASSEMBLY
19021 GROUND SCREW
19018 ANCHOR
(4) PROVIDED
THIS VIEW FOR PAGE 6
DRILL (4)
3/16 DIA. HOLES
DRILL POINT LOCATIONS PROVIDED
TOP AND BOTTOM FOR 1/2 in.
CONDUIT FITTINGS.
DRILL AS NEEDED
KIT-71100A BOX (SURFACE MOUNT)
RED, GREEN, YELLOW, WHITE AND BLUE
SCREW #6 x 1-1/4 in.
(4) PROVIDED
PNEUMATIC TIMER MODEL
WITH PROVIDED
SURFACE BACKBOX
SCREW #6-32 x 1 in.
(2) PROVIDED
BUTTON AND SWITCH ASSEMBLY
GROUND SCREW
ANCHOR
(4) PROVIDED
THIS VIEW FOR PAGE 6
DRILL (4)
3/16 DIA. HOLES
BACKPLATE WITH MOLDED-IN
STAINLESS STEEL INSERT
SWITCH HOUSING MOLDED
OF POLYCARBONATE. CHOOSE
RED, GREEN, YELLOW,
WHITE OR BLUE.
ALLEN HEAD
LOCKING SCREW
AND WRENCH
DRILL POINT LOCATIONS PROVIDED
TOP AND BOTTOM FOR 1/2 in.
CONDUIT FITTINGS.
DRILL AS NEEDED
KIT-71100A BOX (SURFACE MOUNT)
RED, GREEN, YELLOW, WHITE AND BLUE
19039 SCREW #6 x 1-1/4 in.
(4) PROVIDED
PNEUMATIC TIMER MODEL
WITH PROVIDED
SURFACE BACKBOX
19060 SCREW #6-32 x 1 in.
(2) PROVIDED
19021
GROUND SCREW
19018 ANCHOR
(4) PROVIDED
DRILL (4)
3/16 DIA. HOLES
.728 in.
(18.49mm)
2.4 in.
(60.96mm)
3.218 in.
(81.74mm)
4.132 in.
(104.95mm)
4.83 in.
(122.68mm)
1.578 in.
(40.08mm)
- 4 -

CONTACT
SET 1
CONTACT
SET 2
WIRE CONNECTIONS
- 5 -
BUTTON AND SWITCH ASSEMBLY
SWITCH HOUSING
AVAILABLE IN RED, GREEN,
YELLOW, WHITE OR BLUE
WRENCH
(1) PROVIDED
SCREW ALLEN HEAD
#8 - 32 X 3/8 in. (1) PROVIDED
THIS SIDE
CONTACT SET 2
THIS SIDE
CONTACT SET 1
COM
NC
NO
COM
NO
NC
INCORRECT METHOD OF
INSERTING MULTIPLE LEADS
(BOTH WIRES ON
ONE SIDE OF SCREW)
CORRECT METHOD OF
INSERTING MULTIPLE LEADS
(1 WIRE EACH
SIDE OF SCREW)
STRIP
3/8 in. (9mm)
TYPICAL FLUSH MOUNT
SINGLE GANG OUTLET BOX
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES
PUSH
NC NO
COM
4.87 in.
(124mm)
1.62 in.
(41mm)
3.25 in.
(82mm)
1.25 in.
(32mm) 1.62 in.
(41mm)
3.18 in.
(81mm)
1.56 in.
(40mm)
#6-32 x 1 in. SCREW
(2) PROVIDED
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES
BUTTON AND SWITCH ASSEMBLY
SWITCH HOUSING
AVAILABLE IN RED, GREEN,
YELLOW, WHITE OR BLUE
WRENCH
(1) PROVIDED
SCREW ALLEN HEAD
#8 - 32 X 3/8 in. (1) PROVIDED
THIS SIDE
CONTACT SET 2
THIS SIDE
CONTACT SET 1
COM
NC
NO
COM
NO
NC
INCORRECT METHOD OF
INSERTING MULTIPLE LEADS
(BOTH WIRES ON
ONE SIDE OF SCREW)
CORRECT METHOD OF
INSERTING MULTIPLE LEADS
(1 WIRE EACH
SIDE OF SCREW)
STRIP
3/8 in. (9mm)
TYPICAL FLUSH MOUNT
SINGLE GANG OUTLET BOX
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES
PUSH
NC NO
COM
4.87 in.
(124mm)
1.62 in.
(41mm)
3.25 in.
(82mm)
1.25 in.
(32mm) 1.62 in.
(41mm)
3.18 in.
(81mm)
1.56 in.
(40mm)
#6-32 x 1 in. SCREW
(2) PROVIDED
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES
BUTTON AND SWITCH ASSEMBLY
SWITCH HOUSING
AVAILABLE IN RED, GREEN,
YELLOW, WHITE OR BLUE
WRENCH
(1) PROVIDED
SCREW ALLEN HEAD
#8 - 32 X 3/8 in. (1) PROVIDED
THIS SIDE
CONTACT SET 2
THIS SIDE
CONTACT SET 1
COM
NC
NO
COM
NO
NC
INCORRECT METHOD OF
INSERTING MULTIPLE LEADS
(BOTH WIRES ON
ONE SIDE OF SCREW)
CORRECT METHOD OF
INSERTING MULTIPLE LEADS
(1 WIRE EACH
SIDE OF SCREW)
STRIP
3/8 in. (9mm)
TYPICAL FLUSH MOUNT
SINGLE GANG OUTLET BOX
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES
PUSH
NC NO
COM
4.87 in.
(124mm)
1.62 in.
(41mm)
3.25 in.
(82mm)
1.25 in.
(32mm) 1.62 in.
(41mm)
3.18 in.
(81mm)
1.56 in.
(40mm)
#6-32 x 1 in. SCREW
(2) PROVIDED
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES
BUTTON AND SWITCH ASSEMBLY
SWITCH HOUSING
AVAILABLE IN RED, GREEN,
YELLOW, WHITE OR BLUE
WRENCH
(1) PROVIDED
SCREW ALLEN HEAD
#8 - 32 X 3/8 in. (1) PROVIDED
THIS SIDE
CONTACT SET 2
THIS SIDE
CONTACT SET 1
COM
NC
NO
COM
NO
NC
INCORRECT METHOD OF
INSERTING MULTIPLE LEADS
(BOTH WIRES ON
ONE SIDE OF SCREW)
CORRECT METHOD OF
INSERTING MULTIPLE LEADS
(1 WIRE EACH
SIDE OF SCREW)
STRIP
3/8 in. (9mm)
TYPICAL FLUSH MOUNT
SINGLE GANG OUTLET BOX
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES
PUSH
NC NO
COM
4.87 in.
(124mm)
1.62 in.
(41mm)
3.25 in.
(82mm)
1.25 in.
(32mm) 1.62 in.
(41mm)
3.18 in.
(81mm)
1.56 in.
(40mm)
#6-32 x 1 in. SCREW
(2) PROVIDED
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES

INSTALLATION NOTE
ADA mounting compliance
requires the operable part of
the initiating device shall not
be less than 1.1m (3 1/2 ft.) or
greater than 1.37m (4 1/2 ft.)
above finished floor surface.
INSTALLATION
- 6 -
BUTTON AND SWITCH ASSEMBLY
SWITCH HOUSING
AVAILABLE IN RED, GREEN,
YELLOW, WHITE OR BLUE
WRENCH
(1) PROVIDED
SCREW ALLEN HEAD
#8 - 32 X 3/8 in. (1) PROVIDED
THIS SIDE
CONTACT SET 2
THIS SIDE
CONTACT SET 1
COM
NC
NO
COM
NO
NC
INCORRECT METHOD OF
INSERTING MULTIPLE LEADS
(BOTH WIRES ON
ONE SIDE OF SCREW)
CORRECT METHOD OF
INSERTING MULTIPLE LEADS
(1 WIRE EACH
SIDE OF SCREW)
STRIP
3/8 in. (9mm)
TYPICAL FLUSH MOUNT
SINGLE GANG OUTLET BOX
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES
PUSH
NC NO
COM
4.87 in.
(124mm)
1.62 in.
(41mm)
3.25 in.
(82mm)
1.25 in.
(32mm) 1.62 in.
(41mm)
3.18 in.
(81mm)
1.56 in.
(40mm)
#6-32 x 1 in. SCREW
(2) PROVIDED
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES
BUTTON AND SWITCH ASSEMBLY
SWITCH HOUSING
AVAILABLE IN RED, GREEN,
YELLOW, WHITE OR BLUE
WRENCH
(1) PROVIDED
SCREW ALLEN HEAD
#8 - 32 X 3/8 in. (1) PROVIDED
THIS SIDE
CONTACT SET 2
THIS SIDE
CONTACT SET 1
COM
NC
NO
COM
NO
NC
INCORRECT METHOD OF
INSERTING MULTIPLE LEADS
(BOTH WIRES ON
ONE SIDE OF SCREW)
CORRECT METHOD OF
INSERTING MULTIPLE LEADS
(1 WIRE EACH
SIDE OF SCREW)
STRIP
3/8 in. (9mm)
TYPICAL FLUSH MOUNT
SINGLE GANG OUTLET BOX
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES
PUSH
NC NO
COM
4.87 in.
(124mm)
1.62 in.
(41mm)
3.25 in.
(82mm)
1.25 in.
(32mm) 1.62 in.
(41mm)
3.18 in.
(81mm)
1.56 in.
(40mm)
#6-32 x 1 in. SCREW
(2) PROVIDED
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES

VIEW IN DIRECTION OF ARROW A
KEY RESET PROCEDURE
- 7 -
TO RESET BUTTON, INSERT KEY
INTO THE TWO SLOTS UNDER
BOTTOM SIDE OF BUTTON
INCORRECT METHOD OF
INSERTING MULTIPLE LEADS
(BOTH WIRES ON
ONE SIDE OF SCREW)
CORRECT METHOD OF
INSERTING MULTIPLE LEADS
(1 WIRE EACH
SIDE OF SCREW)
STRIP
3/8 in. (9mm)
FIGURE F
PUSH IN UNTIL BUTTON POPS UP.
SWITCH IS NOW RESET
ALIGN SLOT IN KEY
(CONCAVE SIDE UP)
WITH 2 SLOTS
UNDER BUTTON
KEY-TO-RESET SLOT
LOCATED UNDER BUTTON
PUSH IN UNTIL BUTTON POPS UP.
SWITCH IS NOW RESET
ALIGN SLOT IN KEY (CONCAVE SIDE UP)
WITH 2 SLOTS UNDER BUTTON
KEY-TO-RESET SLOT
LOCATED UNDER BUTTON
PART #KIT-H18061
PART #KIT-H18061
KEY-TO-RESET SLOT
LOCATED UNDER BUTTON
TURN BUTTON CLOCKWISE
UNTIL IT RELEASES
TO RESET BUTTON, INSERT KEY
INTO THE TWO SLOTS UNDER
BOTTOM SIDE OF BUTTON
INCORRECT METHOD OF
INSERTING MULTIPLE LEADS
(BOTH WIRES ON
ONE SIDE OF SCREW)
CORRECT METHOD OF
INSERTING MULTIPLE LEADS
(1 WIRE EACH
SIDE OF SCREW)
STRIP
3/8 in. (9mm)
FIGURE F
PUSH IN UNTIL BUTTON POPS UP.
SWITCH IS NOW RESET
ALIGN SLOT IN KEY
(CONCAVE SIDE UP)
WITH 2 SLOTS
UNDER BUTTON
KEY-TO-RESET SLOT
LOCATED UNDER BUTTON
PUSH IN UNTIL BUTTON POPS UP.
SWITCH IS NOW RESET
ALIGN SLOT IN KEY (CONCAVE SIDE UP)
WITH 2 SLOTS UNDER BUTTON
KEY-TO-RESET SLOT
LOCATED UNDER BUTTON
PART #KIT-H18061
PART #KIT-H18061
KEY-TO-RESET SLOT
LOCATED UNDER BUTTON
TURN BUTTON CLOCKWISE
UNTIL IT RELEASES
TO RESET BUTTON, INSERT KEY
INTO THE TWO SLOTS UNDER
BOTTOM SIDE OF BUTTON
INCORRECT METHOD OF
INSERTING MULTIPLE LEADS
(BOTH WIRES ON
ONE SIDE OF SCREW)
CORRECT METHOD OF
INSERTING MULTIPLE LEADS
(1 WIRE EACH
SIDE OF SCREW)
STRIP
3/8 in. (9mm)
FIGURE F
PUSH IN UNTIL BUTTON POPS UP.
SWITCH IS NOW RESET
ALIGN SLOT IN KEY
(CONCAVE SIDE UP)
WITH 2 SLOTS
UNDER BUTTON
KEY-TO-RESET SLOT
LOCATED UNDER BUTTON
PUSH IN UNTIL BUTTON POPS UP.
SWITCH IS NOW RESET
ALIGN SLOT IN KEY (CONCAVE SIDE UP)
WITH 2 SLOTS UNDER BUTTON
KEY-TO-RESET SLOT
LOCATED UNDER BUTTON
PART #KIT-H18061
PART #KIT-H18061
KEY-TO-RESET SLOT
LOCATED UNDER BUTTON
TURN BUTTON CLOCKWISE
UNTIL IT RELEASES

2306 Airport Rd • Waterford, MI 48327, USA
Phone: [phone] • Fax: [phone]
[email protected] • www.sti-usa.com
Safety Technology International Ltd
Taylor House • 34 Sherwood Road • Bromsgrove
Worcestershire • B60 3DR • England • Tel: [phone]
Fax: [phone] • [email protected] • www.sti-emea.com
MODELS
WITHOUT BACK BOX
MODELS
WITH BACK BOX
PRODUCT DIMENSIONS
Printed in USA
© 2004
06/05
2002F-IS
BUTTON AND SWITCH ASSEMBLY
SWITCH HOUSING
AVAILABLE IN RED, GREEN,
YELLOW, WHITE OR BLUE
WRENCH
(1) PROVIDED
SCREW ALLEN HEAD
#8 - 32 X 3/8 in. (1) PROVIDED
THIS SIDE
CONTACT SET 2
THIS SIDE
CONTACT SET 1
COM
NC
NO
COM
NO
NC
INCORRECT METHOD OF
INSERTING MULTIPLE LEADS
(BOTH WIRES ON
ONE SIDE OF SCREW)
CORRECT METHOD OF
INSERTING MULTIPLE LEADS
(1 WIRE EACH
SIDE OF SCREW)
STRIP
3/8 in. (9mm)
TYPICAL FLUSH MOUNT
SINGLE GANG OUTLET BOX
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES
PUSH
NC NO
COM
4.87 in.
(124mm)
1.62 in.
(41mm)
3.25 in.
(82mm)
1.25 in.
(32mm) 1.62 in.
(41mm)
3.18 in.
(81mm)
1.56 in.
(40mm)
#6-32 x 1 in. SCREW
(2) PROVIDED
GROUND SCREW
BUTTON AND SWITCH ASSEMBLY
SCREW #6-32 x 1 in.
(2) PROVIDED
SCREW #6 x 1-1/4 in.
(4) PROVIDED
KIT-71100A-COLOR SURFACE BOX
ANCHOR
(4) PROVIDED
DRILL (4) 3/16 in.
DIA HOLES
WARRANTY
Three year guarantee against breakage of polycarbonate in normal use (one year on electro
mechanical and electronic components). Electronic warranty form a www.sti-usa.com/wc14.
WARNING: This product can expose you to chemicals including Bisphenol A, which is
known to the State of California to cause reproductive harm and Dichloromethane, which
is known to the State of California to cause cancer.
For more information go to www.P65Warnings.ca.gov.