Siemens Delta Profil Series User manual

GAMMA instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single UP 241, neutral 5WG1 241-2AB_1
UP 242, with I/O symbols 5WG1 242-2AB_1
Pushbutton double UP 243, neutral 5WG1 243-2AB_1
UP 244, with I/O symbols 5WG1 244-2AB_1
Pushbutton quadruple UP 245, neutral 5WG1 245-2AB_1
UP 246, with I/O symbols 5WG1 246-2AB_1
DELTA style Pushbutton single UP 285, neutral 5WG1 285-2AB_1
Pushbutton double UP 286, neutral 5WG1 286-2AB_1
Pushbutton quadruple UP 287, neutral 5WG1 287-2AB_1
Siemens AG UP 24x-28x_Taster, 7 pages Technical Manual
Automation and Drives Group
Electrical Installation Technology ©Siemens AG 2008 Update: http://www.siemens.de/gamma
P.O. Box 10 09 53, D-93009 Regensburg Subject to change without prior notice
2.16.1.5/1
Product DELTA profil DELTA style
pearl grey 5WG1 241-2AB01 basalt black / metallic silver 5WG1 285-2AB01
titanium white 5WG1 241-2AB11 titanium white 5WG1 285-2AB11
anthracite 5WG1 241-2AB21 basalt black 5WG1 285-2AB21
silver 5WG1 241-2AB71 platinum metallic 5WG1 285-2AB41
titanium white / metallic silver 5WG1 285-2AB81
Pushbutton
single,
neutral
pearl grey 5WG1 242-2AB01
titanium white 5WG1 242-2AB11
anthracite 5WG1 242-2AB21
silver 5WG1 242-2AB71
Pushbutton
single,
with I/O symbols
pearl grey 5WG1 243-2AB01 basalt black / metallic silver 5WG1 286-2AB01
titanium white 5WG1 243-2AB11 titanium white 5WG1 286-2AB11
anthracite 5WG1 243-2AB21 basalt black 5WG1 286-2AB21
silver 5WG1 243-2AB71 platinum metallic 5WG1 286-2AB41
titanium white / metallic silver 5WG1 286-2AB81
Pushbutton
double,
neutral
pearl grey 5WG1 244-2AB01
titanium white 5WG1 244-2AB11
anthracite 5WG1 244-2AB21
silver 5WG1 244-2AB71
Pushbutton
double,
with I/O symbols
pearl grey 5WG1 245-2AB01 basalt black / metallic silver 5WG1 287-2AB01
titanium white 5WG1 245-2AB11 titanium white 5WG1 287-2AB11
anthracite 5WG1 245-2AB21 basalt black 5WG1 287-2AB21
silver 5WG1 245-2AB71 platinum metallic 5WG1 287-2AB41
titanium white / metallic silver 5WG1 287-2AB81
Pushbutton
quadruple,
neutral
pearl grey 5WG1 246-2AB01
titanium white 5WG1 246-2AB11
anthracite 5WG1 246-2AB21
silver 5WG1 246-2AB71
Pushbutton
quadruple,
with I/O symbols

GAMMA instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single UP 241, neutral 5WG1 241-2AB_1
UP 242, with I/O symbols 5WG1 242-2AB_1
Pushbutton double UP 243, neutral 5WG1 243-2AB_1
UP 244, with I/O symbols 5WG1 244-2AB_1
Pushbutton quadruple UP 245, neutral 5WG1 245-2AB_1
UP 246, with I/O symbols 5WG1 246-2AB_1
DELTA style Pushbutton single UP 285, neutral 5WG1 285-2AB_1
Pushbutton double UP 286, neutral 5WG1 286-2AB_1
Pushbutton quadruple UP 287, neutral 5WG1 287-2AB_1
Technical Manual UP 24x-28x_Taster, 7 pages Siemens AG
Automation and Drives Group
Update: http://www.siemens.de/gamma ©Siemens AG 200 Electrical Installation Technology
Subject to change without prior notice P.O. Box 10 09 53, D-93009 Regensburg
2.16.1.5/2
Product DELTA profil DELTA style
ordered separately from the DELTA ranges
Frame
cut-out frames ____
Bus coupling unit UP 110; UP 114
Diagram 1: Mounting the pushbutton
C1 Bus coupling unit
C2 Frame
C3 Fixing screws *)
C4 Basic pushbutton module *)
C5 Rockers *)
C6 Mounting rack *)
C7 Recess *)
*) Scope of supply
Product and Applications Description
There is an upper and a lower operating field on the
pushbuttons. In the middle of the pushbutton there is a
note panel in which pictograms can be inserted. This
panel also contains display elements (LEDs) for orienta-
tion lighting and also for status displays. Opposing rock-
ers are combined to form a pair e.g. for defined switch-
ing, dimming, controlling shutters and blinds.
It is also possible to carry out the switching functions
ON and OFF e.g. via a pushbutton “UP”.
Using an application program, the flush-mounted
pushbuttons give commands via the flush-mounted bus
coupler for example to actuators for defined switching
on/off, for dimming lamps, raising/lowering shutters or
for louvre adjustment or other parameterisable func-
tional units.
The device pushbutton is placed together with the rele-
vant DELTA frame on the flush-mounted bus coupler
and can only function in combination with the bus cou-
pler UP and an appropriate application program, i.e. the
pushbuttons (with bus coupler UP) consist of the de-
vices (hardware) and the application programs (soft-
ware).
The bus coupler UP and the relevant frame are not sup-
plied with the device but must be ordered separately.
Using the ETS program, the application programs can be
selected and the specific parameters and addresses can
be assigned.
C5
C6
C5
C1
C2
C5
C7
C5
C5
C7
C3
C4
C7
C4
C3
C4
C3
C6
C5
C6

GAMMA instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single UP 241, neutral 5WG1 241-2AB_1
UP 242, with I/O symbols 5WG1 242-2AB_1
Pushbutton double UP 243, neutral 5WG1 243-2AB_1
UP 244, with I/O symbols 5WG1 244-2AB_1
Pushbutton quadruple UP 245, neutral 5WG1 245-2AB_1
UP 246, with I/O symbols 5WG1 246-2AB_1
DELTA style Pushbutton single UP 285, neutral 5WG1 285-2AB_1
Pushbutton double UP 286, neutral 5WG1 286-2AB_1
Pushbutton quadruple UP 287, neutral 5WG1 287-2AB_1
Siemens AG UP 24x-28x_Taster 7 pages Technical Manual
Automation and Drives Group
Electrical Installation Technology ©Siemens AG 2008 Update: http://www.siemens.de/gamma
P.O. Box 10 09 53, D-93009 Regensburg Subject to change without prior notice
2.16.1.5/3
Application Programs
Pushbutton single
12 S1 On-off-toggle/Dim/Shu/Display 211301
•Pushbutton for
-switching On / OFF / toggle
-dimming
-blinds control
•1 LED for status indication or orientation light
•1 LED orientation light
20 S1 Rocker (BCU2) 907402
(when using UP 114)
•Pushbutton for
-switching On / OFF / toggle / bell function
-dimming
-8 bit value
-blinds control
-scene 1 bit (recall/store)
•separate pushbutton objects for switching and value
•1 LED for status indication via a separate LED object
•1 LED orientation light
Pushbutton double
12 S2 On-off-toggle/Dim/Shu/Display 221301
•Pushbutton for
-switching On / OFF / toggle
-dimming
-blinds control
•2 LEDs for status indication or orientation light
•1 LED orientation light
20 S2 Rocker (BCU2) 907502
(when using UP 114)
•Pushbutton for
-switching On / OFF / toggle / bell function
-dimming
-8 bit value
-blinds control
-scene 1 bit (recall/store)
•separate pushbutton objects for switching and value
•2 LEDs for status indication via separate LED objects
•1 LED orientation light
Pushbutton quadruple
12 S4 On-off/Dim/Shutter 241301
•Pushbutton for
-switching On / OFF / toggle
-dimming
-8 bit value
-blinds control
•4 LEDs for status indication or orientation light
•1 LED orientation light
12 S4 On/Off/Toggle/Value 241901
•Pushbutton for
-switching On / OFF / toggle / bell function
-8 bit value
•separate pushbutton objects
•4 LEDs for status indication or orientation light
•1 LED orientation light
20 S4 Rocker (BCU2) 907602
(when using UP 114)
•Pushbutton for
-switching On / OFF / toggle / bell function
-dimming
-8 bit value
-blinds control
-scene 1 bit (recall/store)
•separate pushbutton objects for switching and value
•4 LEDs for status indication via separate LED objects
•1 LED orientation light

GAMMA instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single UP 241, neutral 5WG1 241-2AB_1
UP 242, with I/O symbols 5WG1 242-2AB_1
Pushbutton double UP 243, neutral 5WG1 243-2AB_1
UP 244, with I/O symbols 5WG1 244-2AB_1
Pushbutton quadruple UP 245, neutral 5WG1 245-2AB_1
UP 246, with I/O symbols 5WG1 246-2AB_1
DELTA style Pushbutton single UP 285, neutral 5WG1 285-2AB_1
Pushbutton double UP 286, neutral 5WG1 286-2AB_1
Pushbutton quadruple UP 287, neutral 5WG1 287-2AB_1
Technical Manual UP 24x-28x_Taster, 7 pages Siemens AG
Automation and Drives Group
Update: http://www.siemens.de/gamma ©Siemens AG 200 Electrical Installation Technology
Subject to change without prior notice P.O. Box 10 09 53, D-93009 Regensburg
2.16.1.5/4
Installation instructions
•The device can be used for permanent interior instal-
lations, in dry rooms and for insertion in flush-type
boxes.
VDANGER
•The device may only be installed and commissioned
by an authorized electrician.
•The device may not be inserted in the same box as
230 V devices.
•The device may be used in switch sockets, if VDE
approved devices have been used.
•The prevailing safety and accident regulations must
be observed.
•The device may not be opened.
•For planning and construction of electric installations,
the relevant guidelines, regulations and standards of
the respective country are to be considered.
Technical data
Power supply
•via the flush-mounted bus coupler
Operating elements
•1, 2 or 4 pairs of rockers, idle in the middle position
•Number of switching cycles: > 20,000
Display elements
•per pair of pushbuttons 1 LED red for status display
e.g. pushbutton quadruple = 4 LEDs
•1 LED red for orientation light
Connections
•10-pole plug connector (PEI): for connection to the
flush-mounted bus coupler
Mechanical data
•Housing: plastic
•Dimensions:
- DELTA profil (L x W x D ): 65 x 65 x 11 mm
- DELTA style (L x W x D ): 68 x 68 x 14 mm
•Weight: approx. 40 g
•Fire load: approx. 950 kJ ±10 %
•Mounting: placed on the flush-mounted bus coupler
Electrical safety
•Degree of pollution (according to IEC 60664-2): 2
•Type of protection (according to EN 60529): IP 20
•Protection class (according to IEC 61140): III
•Overvoltage category (according to IEC 60664-1): III
•Bus: safety extra-low voltage SELV DC 24 V
•Device complies with EN 50090-2-2 and
IEC 60664-1: 1992
Reliability
•Rate of failure: 27 fit at 40oC
EMC requirements
•complies with EN 50081-1, EN 61000-6-2 and
EN 50090-2-2
Environmental conditions
•Climatic withstand capability: EN 50090-2-2
•Ambient operating temperature: - 5 ... + 45 °C
•Storage temperature: - 25 ... + 70 °C
•Relative humidity (not condensing): 5 % to 93 %
Markings
•KNX / EIB
CE mark
•in accordance with the EMC guideline (residential and
functional buildings) and the low voltage guideline

GAMMA instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single UP 241, neutral 5WG1 241-2AB_1
UP 242, with I/O symbols 5WG1 242-2AB_1
Pushbutton double UP 243, neutral 5WG1 243-2AB_1
UP 244, with I/O symbols 5WG1 244-2AB_1
Pushbutton quadruple UP 245, neutral 5WG1 245-2AB_1
UP 246, with I/O symbols 5WG1 246-2AB_1
DELTA style Pushbutton single UP 285, neutral 5WG1 285-2AB_1
Pushbutton double UP 286, neutral 5WG1 286-2AB_1
Pushbutton quadruple UP 287, neutral 5WG1 287-2AB_1
Siemens AG UP 24x-28x_Taster 7 pages Technical Manual
Automation and Drives Group
Electrical Installation Technology ©Siemens AG 2008 Update: http://www.siemens.de/gamma
P.O. Box 10 09 53, D-93009 Regensburg Subject to change without prior notice
2.16.1.5/5
Location and function of the operating and
display elements
A1
A2
A3
A4
A5
Pushbutton single
A1
A2
A3
A4
A5
Pushbutton double
A1
A2
A3
A4
A5
Pushbutton quadruple
Diagram 2: Location of display and operating elements
A1 Upper operating field
A2 LEDs for display
A3 LED as an orientation light
A4 Lower operating field
A5 Cover for pictograms
Mounting
General description
The pushbutton is placed together with the relevant
frame on the flush-mounted bus coupler.
The flush-mounted bus coupler (C1) is connected to the
flush-type box and fixed in position (refer to the installa-
tion instructions for the bus coupler).
Mounting sequence
•Place the basic pushbutton module (C4, diagram 3)
with the relevant frame (C2) on the flush-mounted
bus coupler (C1) and press the one strongly upon the
other.
Using fixing screws:
•If the fixing screws (C3) are used first of all the rockers
(C5) have to be lifted out altogether. This can be
achieved by inserting the screwdriver between the
frames in the recess (C7) and applying leverage (dia-
gram 4).
Important: The pushbutton module (C4, diagram 3)
and the rockers (C5) together with the
frame (C2) must be held down / pressed
down.
•Screw down the fixing screws (C3).
•The rockers (C5) have to be orientated properly and
clicked upon the mounting rack (C6).
C5
C5
C3
C6
C7
C4
C2
C1
C5
C5
C3
C6
C7
C4
C5
C5
C3
C6
C7
C4
Diagram 3: mounting sequence

GAMMA instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single UP 241, neutral 5WG1 241-2AB_1
UP 242, with I/O symbols 5WG1 242-2AB_1
Pushbutton double UP 243, neutral 5WG1 243-2AB_1
UP 244, with I/O symbols 5WG1 244-2AB_1
Pushbutton quadruple UP 245, neutral 5WG1 245-2AB_1
UP 246, with I/O symbols 5WG1 246-2AB_1
DELTA style Pushbutton single UP 285, neutral 5WG1 285-2AB_1
Pushbutton double UP 286, neutral 5WG1 286-2AB_1
Pushbutton quadruple UP 287, neutral 5WG1 287-2AB_1
Technical Manual UP 24x-28x_Taster, 7 pages Siemens AG
Automation and Drives Group
Update: http://www.siemens.de/gamma ©Siemens AG 200 Electrical Installation Technology
Subject to change without prior notice P.O. Box 10 09 53, D-93009 Regensburg
2.16.1.5/6
Drawing for mounting the fixing screws
C7
Pushbutton single
Pushbutton double / pushbutton quadruple
Holding down as shown with pushbutton single
Diagram 4: Lifting out the rockers
Inserting pictograms
•Lift out the pictogram cover (A5) with the screwdriver
by applying leverage, during this hold down the
pushbutton module (C4).
DELTA profil
•Insert the screwdriver into the slot (A2) until it
reaches the stop and then wiggle it.
1) 2)
Diagram 5: Lifting out the pictogram cover
•Lay the pictograms onto the foundation.
•Snap on the pictogram cover (A5) again.
DELTA style
1)
2)
1) Insert the screwdriver between the frame and
the pushbutton module.
2) Swivel the screwdriver towards the wall.
Diagram 6: Lifting out the pictogram cover

GAMMA instabus
Technical Product Information
March 2008
DELTA profil Pushbutton single UP 241, neutral 5WG1 241-2AB_1
UP 242, with I/O symbols 5WG1 242-2AB_1
Pushbutton double UP 243, neutral 5WG1 243-2AB_1
UP 244, with I/O symbols 5WG1 244-2AB_1
Pushbutton quadruple UP 245, neutral 5WG1 245-2AB_1
UP 246, with I/O symbols 5WG1 246-2AB_1
DELTA style Pushbutton single UP 285, neutral 5WG1 285-2AB_1
Pushbutton double UP 286, neutral 5WG1 286-2AB_1
Pushbutton quadruple UP 287, neutral 5WG1 287-2AB_1
Siemens AG UP 24x-28x_Taster 7 pages Technical Manual
Automation and Drives Group
Electrical Installation Technology ©Siemens AG 2008 Update: http://www.siemens.de/gamma
P.O. Box 10 09 53, D-93009 Regensburg Subject to change without prior notice
2.16.1.5/7
retaining tongue
pictogram
pictogram X) foundation
X)
foundation
Diagram 7: inserting the pictograms
•Snap on the pictogram cover (A5) again
Dismantling
Without fixing screws
•Remove the pushbutton (C4, diagram 3) completely
together with the frame from the flush-mounted bus
coupler (C1):
a) with the mere hand
b) with a screwdriver beneath the frame / wall
a) b)
Diagram 8: Dismantling
With fixing screws
•Remove the rockers as described at „Mounting / using
fixing screws“.
•Screw out the fixing screws (C3)
•Snap on the rockers (C5) again
•Remove the whole pushbutton module (C4) as de-
scribed at „ Without fixing screws “.
Dimension Diagram
Dimensions in mm
DELTA profil
10
65
65
DELTA style
14
68
68
General Notes
•The operating instructions must be handed over to the
client.
•Any faulty device should be returned to the local
Siemens office.
•If you have further questions concerning the product
please contact our technical support:
![phone]
![phone]
"www.siemens.com/automation/support-request