Siemens SCALANCE X-000 User manual

SCALANCE X-000
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
SIMATIC NET
Industrial Ethernet switches
SCALANCE X-000
Operating Instructions
09/2016
C79000
-G8976-C344-02
Introduction
1
Network topologies
2
Description of the device
3
Mounting
4
Connecting up
5
Maintenance and
troubleshooting
6
Technical specifications
7
Approvals
8
Dimension drawings
9

Siemens AG
Division Process Industries and Drives
Postfach 48 48
90026 NÜRNBERG
GERMANY
C79000-G8976-C344-02
Ⓟ
09/2016 Subject to change
Copyright © Siemens AG 2010 - 2016.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified
for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

SCALANCE X-000
Operating Instructions, 09/2016, C79000-G8976-C344-02 3
Table of contents
1 Introduction............................................................................................................................................. 5
1.1 On the Operating Instructions...................................................................................................5
1.2 On the product ..........................................................................................................................7
2 Network topologies ................................................................................................................................. 9
3 Description of the device ....................................................................................................................... 11
3.1 Overview SCALANCE X-000..................................................................................................11
3.2 Product characteristics............................................................................................................12
3.3 TP ports (twisted pair).............................................................................................................13
3.4 LEDs .......................................................................................................................................16
4 Mounting............................................................................................................................................... 17
4.1 Safety notices for installation ..................................................................................................17
4.2 Types of installation ................................................................................................................18
4.3 Installation on a DIN rail..........................................................................................................19
4.4 Installation on a standard rail..................................................................................................21
4.5 Wall mounting .........................................................................................................................22
5 Connecting up....................................................................................................................................... 23
5.1 Safety when connecting up.....................................................................................................23
5.2 Wiring rules .............................................................................................................................25
5.3 Power supply ..........................................................................................................................26
5.4 Grounding ...............................................................................................................................27
5.5 IE FC RJ-45 Plug 180.............................................................................................................28
6 Maintenance and troubleshooting.......................................................................................................... 31
7 Technical specifications ........................................................................................................................ 33
8 Approvals.............................................................................................................................................. 39
9 Dimension drawings.............................................................................................................................. 45
Index..................................................................................................................................................... 47

Table of contents
SCALANCE X-000
4Operating Instructions, 09/2016, C79000-G8976-C344-02

SCALANCE X-000
Operating Instructions, 09/2016, C79000-G8976-C344-02 5
Introduction
1
1.1
On the Operating Instructions
Purpose of the Operating Instructions
These operating instructions support you when commissioning the unmanaged Industrial
Ethernet entry level switches SCALANCE X-000.
Validity of the Operating Instructions
These operating instructions are valid for the following devices:
Device
Article number
SCALANCE X005 6GK5 005-0BA00-1AA3
6GK5 005-0BA10-1AA3
SCALANCE X005TS (Transportation
System)
6GK5 005-0BA00-1CA3
Further documentation
The "SIMATIC NET Industrial Ethernet Twisted Pair and Fiber Optic Networks" manual
contains additional information on other SIMATIC NET products that you can operate along
with the SCALANCE X-000 IE switches in an Industrial Ethernet network.
You can order the manual "SIMATIC NET Industrial Twisted Pair and Fiber Optic Networks",
release 05/2001, using the following order numbers:
6GK1970-1BA10-0AA0 German
6GK1970-1BA10-0AA1 English
6GK1970-1BA10-0AA2 French
6GK1970-1BA10-0AA4 Italian
You will also find this network manual on the Internet pages of Service & Support under the
following entry ID: 1172207 (http://support.automation.siemens.com/WW/view/en/1172207).
You will find further information in the "System Manual Industrial Ethernet" in the Manual
Collection.
You will find further information on the SCALANCE system on the Internet at
www.siemens.com/scalance (www.siemens.com/scalance).
Audience
These Operating Instructions are intended for persons who commission networks with the IE
switches of the SCALANCE X-000 product line.

Introduction
1.1 On the Operating Instructions
SCALANCE X-000
6Operating Instructions, 09/2016, C79000-G8976-C344-02
SIMATIC NET glossary
Explanations of many of the specialist terms used in this documentation can be found in the
SIMATIC NET glossary.
You will find the SIMATIC NET glossary on the Internet at the following address:
50305045 (http://support.automation.siemens.com/WW/view/en/50305045)
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, solutions, machines, equipment and/or networks. They are
important components in a holistic industrial security concept. With this in mind, Siemens’
products and solutions undergo continuous development. Siemens recommends strongly
that you regularly check for product updates.
For the secure operation of Siemens products and solutions, it is necessary to take suitable
preventive action (e.g. cell protection concept) and integrate each component into a holistic,
state-of-the-art industrial security concept. Third-party products that may be in use should
also be considered. You will find more information about Industrial Security in:
Industrial security (http://www.siemens.com/industrialsecurity)
To stay informed about product updates as they occur, sign up for a product-specific
newsletter. You will find more information about this in
Product support (https://support.industry.siemens.com/cs/ww/en/ps/15247/pm)

Introduction
1.2 On the product
SCALANCE X-000
Operating Instructions, 09/2016, C79000-G8976-C344-02 7
1.2
On the product
What is possible?
The SCALANCE X-000 IE switches allow the cost-effective installation of small Industrial
Ethernet linear bus or star structures with switching functionality. The devices are designed
for installation in a cabinet.
Note
It is not possible to use a SCALANCE
X-000 in a redundant ring because it does not support
redundancy.
Note
If devices are supplied over long 24 V power supply lines or
networks, measures are
necessary to prevent interference by strong electromagnetic pulses on the supply lines.
These can result, for example, due to lightning or switching of large inductive loads.
One of the tests used to attest the immunity of these dev
ices to electromagnetic interference
is the "surge immunity test" according to EN 61000
-4-5. This test requires overvoltage
protection for the power supply lines. A suitable device is, for example, the Dehn Blitzductor
BVT AVD 24 V type no. 918 422 or a co
mparable protective element.
Manufacturer:
DEHN+SÖHNE GmbH+Co.KG Hans Dehn Str.1 Postfach 1640 D
-92306 Neumarkt,
Germany
Components of the product
The following components are supplied with a SCALANCE X-000:
●IE switch SCALANCE X-000
●2-terminal plug-in block (power supply)
●Product information
Accessories
Component
Packaging unit
Article number
IE FC Stripping Tool
1
6GK1 901-1GA00
IE FC blade cassettes
1
6GK1 901-1GB00
IE FC TP standard cable GP
1
6XV1 840 2AH10
IE FC TP trailing cable
1
6XV1 840-3AH10
IE FC TP marine cable
1
6XV1 840-4AH10
IE FC TP trailing cable GP
1
6XV1 870-2D
IE FC TP flexible cable GP
1
6XV1 870-2B
IE FC RJ-45 Plug 180
1
6GK1 901-1BB10-2AA0

Introduction
1.2 On the product
SCALANCE X-000
8Operating Instructions, 09/2016, C79000-G8976-C344-02
Component
Packaging unit
Article number
IE FC RJ-45 Plug 180
10
6GK1 901-1BB10-2AB0
IE FC RJ-45 Plug 180 50 6GK1 901-1BB10-2AE0
Unpacking and checking
WARNING
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to
the specification.
If you use damaged parts, this can lead to the following problems:
•Injury to persons
•Loss of the approvals
•Violation of the EMC regulations
•Damage to the device and other components
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
Warning triangle on the type plate.
This warning triangle on the type plate refers to the safety-relevant notes in the
documentation.
Read the operating instructions and note the safety-relevant information.

SCALANCE X-000
Operating Instructions, 09/2016, C79000-G8976-C344-02 9
Network topologies
2
Switching technology allows extensive networks to be set up with numerous nodes and
simplifies network expansion.
Which topologies can be implemented?
Using the SCALANCE X-000 IE switches, you can implement star topologies.
Note
Keep to the maximum permitted cable lengths of the devices you are using. You will find the
permitted cable lengths in the section "
Technical specifications (Page 33)".
Star topology
Figure 2-1 Example of a star topology with SCALANCE X-000

Network topologies
SCALANCE X-000
10 Operating Instructions, 09/2016, C79000-G8976-C344-02