Siemens SCALANCE X-200 User manual

___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
SIMATIC NET
Industrial Ethernet Switches
SCALANCE X-200
Operating Instructions
02/2018
C79000
-G8976-C284-12
Preface
Functions
1
Description of the device
2
Safety notices
3
Installation
4
Connecting up
5
Approvals
6
Technical specifications
7
Dimension drawings
A
Test of mechanical stability
B
Training, Service & Support
C

Siemens AG
Division Process Industries and Drives
Postfach 48 48
90026 NÜRNBERG
GERMANY
C79000-G8976-C284-12
Ⓟ
03/2018 Subject to change
Copyright © Siemens AG 2012 - 2018.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified
for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

SCALANCE X-200
Operating Instructions, 02/2018, C79000-G8976-C284-12 3
Preface
Components of the product
The following parts ship with a SCALANCE X-200 IE switch:
●One device
●One 2-pin plug-in terminal block (signaling contact)
●One 4-pin plug-in terminal block (power supply)
●One DVD (configuration manual, operating instructions, Primary Setup Tool, SNMP OPC
profiles)
The following components are supplied with a SCALANCE X-200 IE switch with the
PRO
supplement:
●One device
●Protective caps for the data interfaces
●Protective caps for the connectors of the power supply
●One protective cap for the signaling contact
●One DVD (configuration manual, operating instructions, Primary Setup Tool, SNMP OPC
profiles)
The following parts ship with a SCALANCE XF-200IRT IE switch with slots for
bus adapters
:
●One device
●One 2-pin plug-in terminal block (signaling contact)
●Two 2-pin plug-in terminal blocks (power supply)
●One DVD (configuration manual, operating instructions, Primary Setup Tool, SNMP OPC
profiles)
●In addition with the premounted variant SCALANCE XF202-2P IRT:
–2 bus adapters BA SCRJ/RJ-45
●In addition with the premounted variant SCALANCE XF201-3P IRT:
–1 bus adapter BA 2xSCRJ
–1 bus adapter BA SCRJ/RJ-45

Preface
SCALANCE X-200
4Operating Instructions, 02/2018, C79000-G8976-C284-12
Unpacking, checking
WARNING
Do not use any parts that show evidence of damage. If you use damaged parts, there is no
guarantee that the device will function according to the specification.
If you use damaged parts, this can lead to the following problems:
•Injury to persons
•Loss of the approvals
•Violation of the EMC regulations
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
If the consignment is incomplete or damaged, contact your supplier or your local Siemens
office.
Recycling and disposal
The products are low in pollutants, can be recycled and meet the requirements of the WEEE
directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a certified
disposal company for electronic scrap or your Siemens contact (Product return
(https://support.industry.siemens.com/cs/ww/en/view/109479891)).
Note the different national regulations.
Device defective
If a fault develops, please send the device to your SIEMENS service center for repair.
Repairs on-site are not possible.
Purpose of the Operating Instructions
These operating instructions support you when commissioning networks with the devices of
the product line SCALANCE X-200.

Preface
SCALANCE X-200
Operating Instructions, 02/2018, C79000-G8976-C284-12 5
Overview of the technical documentation of the IE Switches X-200
The technical documentation of the X-200 product line is divided into hardware and software
and can be found in the following documents:
●
PH SCALANCE X-200 configuration manual
Software description of the X-200 product line
●
SCALANCE X-200 BA Operating Instructions
Hardware description for all product groups and general information.
You will find the documents here:
●On the data medium that ships with some products:
–Product CD / product DVD
–SIMATIC NET Manual Collection
●On the Internet pages of Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/view/60612658).
Validity of the Operating Instructions
These operating instructions are valid for the following devices:
SCALANCE X-200 and SCALANCE XF-200
Product name:
Article number:
X204-2 6GK5 204-2BB10-2AA3
X204-2TS
6GK5 204-2BB10-2CA2
X204-2FM
6GK5 204-2BB11-2AA3
X204-2LD
6GK5 204-2BC10-2AA3
X204-2LD TS
6GK5 204-2BC10-2CA2
X206-1
6GK5 206-1BB10-2AA3
X206-1LD
6GK5 206-1BC10-2AA3
X208
6GK5 208-0BA10-2AA3
X208PRO
6GK5 208-0HA10-2AA6
X212-2
6GK5 212-2BB00-2AA3
X212-2LD
6GK5 212-2BC00-2AA3
X216
6GK5 216-0BA00-2AA3
X224
6GK5 224-0BA00-2AA3
Flat design:
XF204
6GK5 204-0BA00-2AF2
XF204-2
6GK5 204-2BC00-2AF2
XF206-1
6GK5 206-1BC00-2AF2
XF208
6GK5 208-0BA00-2AF2

Preface
SCALANCE X-200
6Operating Instructions, 02/2018, C79000-G8976-C284-12
SCALANCE X-200IRT and XF-200IRT
Product name:
Article number:
X200-4P IRT 6GK5 200-4AH00-2BA3
X201-3P IRT
6GK5 201-3BH00-2BA3
X201-3P IRT PRO
6GK5 201-3JR00-2BA6
X202-2IRT
6GK5 202-2BB00-2BA3
X202-2P IRT
6GK5 202-2BH00-2BA3
X202-2P IRT PRO
6GK5 202-2JR00-2BA6
X204IRT
6GK5 204-0BA00-2BA3
X204IRT PRO
6GK5 204-0JA00-2BA6
Flat design:
XF204IRT
6GK5 204-0BA00-2BF2
XF204-2BA IRT *
)
6GK5 204-2AA00-2BD2
*
)
Basic device without bus adapter
Premounted variants
Product name: Article number: Components: Article number compo-
nents:
XF201-3P IRT 6GK5 201-3BH00-2BD2 1 basic device XF204-2BA
IRT
6GK5 204-2AA00-2BD2
1 bus adapter BA 2xSCRJ
6ES7 193-6AP00-0AA0
1 bus adapter BA SCRJ/RJ-
45
6ES7 193-6AP20-0AA0
XF202-2P IRT 6GK5 202-2BH00-2BD2 1 basic device XF204-2BA
IRT
6GK5 204-2AA00-2BD2
2 bus adapters BA
SCRJ/RJ-45
6ES7 193-6AP20-0AA0
Purpose
The SCALANCE X-200 devices are switches for setting up Ethernet networks for industrial
applications.
Restricted area of application according to Hazardous Locations (HazLoc)
The devices are only suitable for use in the following areas:
●In areas according to Class I, Division 2, Groups A, B, C and D and in areas without
explosive atmospheres.
●In areas according to Class I, Zone 2 Groups IIC and in areas without explosive
atmospheres.

Preface
SCALANCE X-200
Operating Instructions, 02/2018, C79000-G8976-C284-12 7
Names of the devices in these operating instructions
Unless mentioned otherwise, the descriptions in these operating instructions refer to all
devices of the SCALANCE X-200 product line named above in the section on Validity.
In the remainder of the instructions, these will also be referred to as
IE switches
or also
simply as
X-200
.
Further documentation
System manuals for SIMATIC NET products
In the system manuals "Industrial Ethernet / PROFINET Industrial Ethernet" and "Industrial
Ethernet / PROFINET passive network components", you will find information on other
SIMATIC NET products that you can operate along with the devices of this product line in an
Industrial Ethernet network.
You will find the system manuals on the Internet pages of Siemens Industry Online Support
under the following entry IDs:
●Industrial Ethernet / PROFINET Industrial Ethernet System Manual
27069465 (https://support.industry.siemens.com/cs/ww/en/view/27069465)
●Industrial Ethernet / PROFINET - Passive Network Components System Manual
84922825 (https://support.industry.siemens.com/cs/ww/en/view/84922825)
Manual Collection "Distributed I/O System ET 200SP"
In the reference manual for the scalable IO system ET 200SP you will find more information
on the bus adapters.
You will find the reference manual on the Internet pages of Siemens Industry Online
Support:
●SIMATIC ET 200SP Manual Collection
(https://support.industry.siemens.com/cs/ww/en/ps/man)
Finding information
To help orientation, there is not only a table of contents but also an Index in the Appendix.
The SIMATIC NET Glossary also provides additional help, see below.
Audience
These operating instructions are intended for persons involved in commissioning networks in
which IE switches are used.

Preface
SCALANCE X-200
8Operating Instructions, 02/2018, C79000-G8976-C284-12
SIMATIC NET Selection Tool
The SIMATIC NET selection tool supports you when selecting Industrial Ethernet switches
and components for Industrial Wireless Communication. You will find current information on
the Product Support pages under the following entry ID:
39134641 (http://www.siemens.de/snst)
Where to find Siemens documentation
●Article numbers
You will find the article numbers for the Siemens products of relevance here in the
following catalogs:
–SIMATIC NET - Industrial Communication / Industrial Identification, catalog IK PI
–SIMATIC - Products for Totally Integrated Automation and Micro Automation, catalog
ST 70
You can request the catalogs and additional information from your Siemens
representative. You will also find the product information in the Siemens Industry Mall at
the following address:
Industry Mall
(https://mall.industry.siemens.com/goos/WelcomePage.aspx?regionUrl=/de&language=e
n)
●Manuals on the Internet
You will find SIMATIC NET manuals on the Internet pages of Siemens Industry Online
Support:
Link to Customer Support (https://support.industry.siemens.com/cs/ww/en/ps)
Go to the required product in the product tree and make the following settings:
Entry type “Manuals”
●Manuals on the data medium
You will find manuals of SIMATIC NET products on the data medium that ships with many
of the SIMATIC NET products.

Preface
SCALANCE X-200
Operating Instructions, 02/2018, C79000-G8976-C284-12 9
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be
connected to an enterprise network or the internet if and to the extent such a connection is
necessary and only when appropriate security measures (e.g. firewalls and/or network
segmentation) are in place.
Additionally, Siemens’ guidance on appropriate security measures should be taken into
account. For additional information on industrial security measures that may be
implemented, please visit
https://www.siemens.com/industrialsecurity (https://www.siemens.com/industrialsecurity)
Siemens’ products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customers’ exposure
to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
https://www.siemens.com/industrialsecurity (https://www.siemens.com/industrialsecurity)
SIMATIC NET glossary
Explanations of many of the specialist terms used in this documentation can be found in the
SIMATIC NET glossary.
You will find the SIMATIC NET glossary on the Internet at the following address:
50305045 (https://support.industry.siemens.com/cs/ww/en/view/50305045)
Trademarks
The following and possibly other names not identified by the registered trademark sign ®are
registered trademarks of Siemens AG:
SIMATIC NET, SCALANCE, C-PLUG, OLM

Preface
SCALANCE X-200
10 Operating Instructions, 02/2018, C79000-G8976-C284-12

SCALANCE X-200
Operating Instructions, 02/2018, C79000-G8976-C284-12 11
Table of contents
Preface ................................................................................................................................................... 3
1 Functions .............................................................................................................................................. 13
2 Description of the device....................................................................................................................... 17
2.1 Device views ...........................................................................................................................17
2.2 Accessories.............................................................................................................................20
2.3 The LEDs ................................................................................................................................24
2.3.1 LED display when the device starts up...................................................................................24
2.3.2 Power LED "L" (green/yellow LED) ........................................................................................24
2.3.3 Fault LED "F" (yellow/red LED) ..............................................................................................25
2.3.4 Redundancy manager LED "RM" (green LED).......................................................................26
2.3.5 Standby LED "RM" (yellow LED) ............................................................................................27
2.3.6 Port LEDs "P" (green/yellow LEDs) ........................................................................................27
2.3.7 Diagnostics LEDs for optical connectors "F" (yellow LED).....................................................28
2.3.8 Show Location ........................................................................................................................28
2.4 The SET button.......................................................................................................................29
2.5 The C-PLUG ...........................................................................................................................30
3 Safety notices ....................................................................................................................................... 35
3.1 Safety notices in general ........................................................................................................35
3.2 Safety notices for hazardous areas ........................................................................................37
3.3 Security recommendations .....................................................................................................38
4 Installation ............................................................................................................................................ 43
4.1 Safety notices for installation ..................................................................................................43
4.2 Installation options ..................................................................................................................47
4.3 Installation on a DIN rail..........................................................................................................48
4.4 Mounting onto standard rail (SCALANCE XF204-2BA IRT)...................................................49
4.5 Installation on a standard rail..................................................................................................51
4.6 Wall mounting .........................................................................................................................52
4.7 Mounting bus adapters ...........................................................................................................53
5 Connecting up....................................................................................................................................... 55
5.1 Safety when connecting up.....................................................................................................55
5.2 Wiring rules .............................................................................................................................58
5.3 Power supply ..........................................................................................................................59
5.3.1 Supply with X-200 via the terminal block................................................................................59
5.3.2 Supply for X208PRO...............................................................................................................60
5.3.3 Supply for IRT-PRO devices...................................................................................................61

Table of contents
SCALANCE X-200
12 Operating Instructions, 02/2018, C79000-G8976-C284-12
5.3.4 Supply with XF-200IRT devices with bus adapter slots......................................................... 63
5.4 Grounding .............................................................................................................................. 65
5.5 Signaling contact.................................................................................................................... 66
5.6 Attachment to Industrial Ethernet........................................................................................... 68
5.6.1 Electrical connections ............................................................................................................ 69
5.6.1.1 Electrical attachments to Industrial Ethernet ......................................................................... 69
5.6.1.2 Electrical connectors of the X208PRO .................................................................................. 71
5.6.2 Optical attachments to Industrial Ethernet............................................................................. 72
5.6.2.1 Multimode fiber-optic cable .................................................................................................... 72
5.6.2.2 Single mode fiber-optic cable................................................................................................. 73
5.6.2.3 POF and PCF cables ............................................................................................................. 74
5.6.3 Push-pull connector for IRT-PRO devices............................................................................. 75
6 Approvals ............................................................................................................................................. 77
7 Technical specifications ........................................................................................................................ 85
A Dimension drawings.............................................................................................................................. 97
B Test of mechanical stability ..................................................................................................................103
C Training, Service & Support .................................................................................................................105
Index ...................................................................................................................................................107

SCALANCE X-200
Operating Instructions, 02/2018, C79000-G8976-C284-12 13
Functions
1
Functions of the X-200 IE Switches
The X-200 IE switches are ideally suited for setting up Industrial Ethernet networks in bus,
star and ring structures with transmission rates of 10/100 Mbps. All X-200 switches operate
in the SIMATIC environment.
Hardware properties:
●X devices have a rugged metal housing and can be installed on a DIN rail, a standard rail
or directly on a wall.
●XF devices have a plastic housing and a flat design. They are suitable for installation on a
DIN rail.
●Redundant power supply, 2 x 24 VDC (exception: IRT-PRO devices)
●Diagnostics LED
●Signaling contact
●SET button for local configuration of the signaling contact
●Slot for C-PLUG
●Reliable plug-in connections thanks to rugged device connectors suitable for industry in
conjunction with PROFINET-compliant FastConnect plugs.
●TS devices meet the railway standard EN 50155
Software properties:
●PROFINET Diagnostics
●Topology support (LLDP)
●CLI - Command Line Interface / Telnet
●WBM - Web Based Management
●Configuration with STEP 7
●SNMP
●Ring redundancy including redundancy manager
●Passive Listening
●FM devices support the Fiber Monitoring Protocol and allow the monitoring of optical line
sections.

Functions
SCALANCE X-200
14 Operating Instructions, 02/2018, C79000-G8976-C284-12
Special features of the X-200IRT IE switches
The IRT variants were designed specifically for setting up Industrial Ethernet networks with
isochronous/clock synchronous real-time communication. In addition to the properties named
above, the IRT switches also provide the following functions:
●IRT communication based on the combination of the switching methods cut through and
store and forward.
●Fast media redundancy thanks to an integrated redundancy manager for Fast Ethernet.
●Standby redundancy
Special features of the PRO variants
The devices with the "PRO" supplement are designed with degree of protection IP65 or IP67
for use outside a cabinet.
Frame delay times
The number of IE Switches X-200 connected in a line influences the frame delay.
Note
Frame delay time with X-200 without IRT
When a frame passes through X
-200 IE switches, it is delayed by the Store&Forward
function of the X
-200 IE switches.
•
With a 64 byte frame length by approx. 10 microseconds (at 100 Mbps).
•
With a 1500 byte frame length by approx. 130 microseconds (at 100 Mbps).
This means that the more IE
Switch X-200 devices the frame passes through, the longer the
frame delay.
Note
Frame delay time with X-200 with IRT
The more X
-200IRT IE switches a frame runs through, the higher the frame delay. By using
the "cut through" switching mechanism, the X
-200IRT IE switches are ideal to meet the real-
time requirements of PROFINET.
Cut through is, however, not possible
:
•
Between a port set to 10 Mbps and a port set to 100 Mbps.
•
When two packets are to be sent at the same time on one port.
In this case, an X-200 IE switch changes to Store&Forward and the delay increases.

Functions
SCALANCE X-200
Operating Instructions, 02/2018, C79000-G8976-C284-12 15
Overview of the functions
The following table shows the hardware and software properties for each product variant of
the X-200 switches in detail:
Number of electrical and optical connectors in the product name
The number before the hyphen in the product name indicates the number of electrical
connectors. The number following the hyphen indicates the number of optical connectors of
the device. For example, the switch X212-2 has twelve electrical and two optical connectors.

Functions
SCALANCE X-200
16 Operating Instructions, 02/2018, C79000-G8976-C284-12

SCALANCE X-200
Operating Instructions, 02/2018, C79000-G8976-C284-12 17
Description of the device
2
2.1
Device views
Device view based on the example of an X204-2TS
The following figure describes the individual components of an IE switch X200.
1
LEDs for attachments to Industrial Ethernet
2
LEDs
•
L: Power LED, power supply
•
F: Fault LED
•
RM: Redundancy manager or standby
3
Connector for signaling contact
4
Connector for power supply
5
SET button
6
Optical attachment to Industrial Ethernet
7
Electrical attachment to Industrial Ethernet
8
(on rear of device, not shown in figure:) Slot for C
-
PLUG

Description of the device
2.1 Device views
SCALANCE X-200
18 Operating Instructions, 02/2018, C79000-G8976-C284-12
Device view based on the example of an X202-2P IRT PRO
The following figure describes the individual components of a PRO version of an IE switch X-
200.
1
Electrical attachments to Industrial Ethernet
2
LEDs for electrical connectors
3
LEDs for optical connectors with diagnostics
LEDs
4
LEDs
•
L: Power LED, power supply
•
F: Fault LED
•
RM:
–green = redundancy manager
–yellow = standby indicator
5
Optical attachments to Industrial Ethernet
6
Connector for the power supply (supplied with
L1, additionally looped through to L2)
7
Connector for signa
ling contact
8
Power supply for further devices (looped
through from L1 to L2)
9
(on rear of device, not shown in figure): Slot for
the C-PLUG and SET button
Device view based on the example of an XF204
The following figure describes the individual components of an IE switch X-200, flat design.
1
LEDs
•
L: Power LED, power supply
•
F: Fault LED
•
RM: Redundancy manager
2
Attachments to Industrial Ethernet
3
Connector for power supply
4
Connector for signaling contact
5
(behind the connectors, not shown in figure:)
SET button
6
(on side of device, not shown in figure:) Slot for
C-PLUG
7
LEDs for attachm
ents to Industrial Ethernet

Description of the device
2.1 Device views
SCALANCE X-200
Operating Instructions, 02/2018, C79000-G8976-C284-12 19
Device view based on the example of an XF204-2BA IRT
The following figure describes the individual components of an IE switch XF-200IRT, flat
design.
1
BaseUnit with slots for 2 bus adapters
The BaseUnit provides the electrical and m
e-
chanical connection of the bus adapters.
2
LEDs
•
L: Power LED, power supply
•
F: Fault LED
•
RM: Redundancy manager
3
Slot for C-PLUG
4
SET button
5
Connector for signaling contact
6
Connector for power supply

Description of the device
2.2 Accessories
SCALANCE X-200
20 Operating Instructions, 02/2018, C79000-G8976-C284-12
2.2
Accessories
C-PLUG
Component
Description
Article number
C-PLUG Configuratiioon plug, exchangeable storage me-
dium for configuration data
6GK1 900-0AB00
Power llimiter
Component
Description
Article number
Redundancy module
SITOP PSE202U
NEC Class 2
Extension module for limiting the output power
according to NEC Class 2 (power limiter)
6EP1 962-2BA00
Plug Power Plug PRO
Component
Description
Article number
Power Plug PRO 5-pin push-pull-connector for installation on site
1 connector per package
6GK1 907-0AB10-6AA0
RJ-45 data plug-in connector
Component
Description
Article number
IE FC RJ-45 PLUG
PRO (push pull)
RJ-45 data plug-in connector for IE FC TP cables
2x2, IP65
1 connector per package
6GK1 901-1BB20-6AA0
IE RJ-45 PLUG PRO
(push pull)
RJ-45 data plug-in connector for IE TP cables
2x2, IP65
1 connector per package
6GK1 901-1BB10-6AA0
IE FC RJ-45 PLUG
180 2x2
RJ-45 data plug-in connector for IE FC cables
2x2, 180° cable outlet 10/100 Mbps, rugged metal
housing, 1 connector per package
6GK1 901-1BB10-2AA0
IE FC RJ-45 PLUG
180 2x2
RJ-45 data plug-in connector for IE FC cables
2x2, 180° cable outlet, 10/100 Mbps, rugged
metal housing
10 connectors per package
6GK1 901-1BB10-2AB0
IE FC RJ-45 PLUG
180 2x2
RJ-45 data plug-in connector for IE FC cables
2x2, 180° cable outlet, 10/100 Mbps, rugged
metal housing
50 connectors per package
6GK1 901-1BB10-2AE0
IE FC RJ-45 PLUG
180 4x2
RJ-45 data plug-in connector for IE FC cables
4x2 (24 AWG), 180° cable outlet, CAT6A,
10/100/1000/10000 Mbps, rugged metal housing
1 connector per package
6GK1 901-1BB12-2AA0