Signature Hardware KIRANA 949633 User manual

1
GETTING STARTED
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing bathroom �xtures. Signature
Hardware accepts no liability for any damage to the wall,
shelf, or for personal injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the product for shipping damage. If
any damage is found, contact our Customer Relations
team at 1-866-855-2284.
Ensure that you have gathered all the required
materials that are needed for the installation.
KIRANA
HANGING TEAK SHELF
SKU: 949633
REVISED 01/30/2020
CODES: 521487, 521488
TOOLS AND MATERIALS:
Stud Finder Pencil Tape Measure
Level Drill
For Warranty information, please visit: signaturehardware.com/services/warranty

2
INSTALLATION
5. With the help of another person, hang your teak
shelf by attaching the keyhole brackets to the mount-
ing hardware.
4. Drill pilot holes and install the mounting hardware.
Because wall construction and materials vary from
home to home, the appropriate mounting hardware
may need to be purchased from your local hardware
store. Consult a professional if you are unfamiliar with
this type of installation.
3. Measure the location of the keyhole brackets on
the back of the shelf to determine the location of your
mounting hardware.
1. Locate and mark the position of the wall studs to
which you will fasten your teak shelf. You can �nd studs
by listening for a solid sound as you knock on the wall
or by using a stud �nder.
Important: If the studs in your bathroom do not line
up to the mounting location for your shelf, wood
blocking can be installed between the studs using
standard 2 x 4’s. If the wood blocking needs to be
installed behind the �nished wall, we recommend
consulting a professional if you are unfamiliar with this
type of installation.
2. Determine and mark the mounting location. Use a
level to ensure the shelf is perfectly straight.
KIRANA
HANGING TEAK SHELF
SKU: 949633