Signature Hardware PAGOSA 406713 User manual

1
GETTING STARTED
BEFORE YOU BEGIN
We recommend consulting a professional if you are

Hardware accepts no liability for any damage to the
faucet, plumbing, bathtub or for personal injury during



any damage is found, contact our Customer Relations

Ensure that you have gathered all the required






TOOLS AND MATERIALS:
Basin Wrench Adjustable Wrench


2
INSTALLATION



tubes as necessary to ensure there are no kinks or



follow steps 6-8 listed above and attach the water feed


the water supply, check to make sure that all connec-




shower, divert the water to the hose and allow the



the faucet body, unthread and remove the T and


gasket on the faucet body and thread the faucet body








remove set screws located in the side of the handles




between the handle and the mounting surface to


set screw on the top or side of the handle with the




CARE INSTRUCTIONS


