Signature Hardware Fallbrook 947922 User manual

1
FALLBROOK
VANITY MIRROR
SKU: 947922, 949460, 933511, 933512, 947924, 949461, 949462, 947923
REVISED 05/26/2020
CODES: 419535, 419542, 419543, 446068
446740, 446069, 446741, 446070, 446742
450543, 450556, 450402, 453829
TOOLS AND MATERIALS:
Drill
INSTRUCTIONS
Unpack and inspect the product for any shipping

Customer Service at 1-866-855-2284. If you need
assistance or have questions while installing your
mirror, contact Customer Service.
We recommend consulting a professional if you are

Hardware accepts no liability for any damage to the

Pencil Level
BEFORE INSTALLING
Tape Measure
Stud Finder
Read entire Bathroom Mirron Installation Instructions.
Observe all local build and safety codes.
For Warranty information, please visit: signaturehardware.com/services/warranty

2
INSTALLATION
FALLBROOK
VANITY MIRROR
SKU: 947922, 949460, 933511, 933512, 947924, 949461, 949462, 947923
1. With the help of another person, center the mirror
above the sink at the appropriate height and mark a
line at the top of the mirror on the wall.
2. Locate and mark the position of the wall studs to

listening for a solid sound as you knock on the wall or

Tip: If the studs in your bathroom do not line up to
the mounting location for your mirror, wood
blocking can be installed between the studs using
standard 2 x 4’s. We recommend consulting a
professional if you are unfamiliar with this type of
installation.
3. Measure the location of the mounting rail on the
back of the mirror to determine the location of your
wall bracket. Use the top of the mirror as your guide-
line. Use your level to verify that the wall bracket is
properly aligned.
4. Drill pilot holes and install the wall bracket. Because
wall construction and materials vary from home to
home, the appropriate mounting hardware may need
to be purchased from your local hardware store.
Consult a professional if you are unfamiliar with this
type of installation.
5. With the help of another person, hang your mirror by
attaching the mounting rail to the wall bracket.