Signature Hardware FREY 949568 Instruction sheet

1
GETTING STARTED
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing plumbing �xtures. Signature
Hardware accepts no liability for any damage to the
vanity, plumbing, countertop, sink, or for personal injury
during installation.
Observe all local plumbing and building codes.
Unpack and inspect the product for shipping damage. If
any damage is found, contact our Customer Relations
team at 1-866-855-2284.
Ensure that you have gathered all the required
materials that are needed for the installation.
FREY 60” VANITY
WITH VESSEL SINK
SKU: 949568, 949569, 949572
REVISED 01/28/2021
CODES: 531239, 531240, 531241
TOOLS AND MATERIALS:
Damp Cloth
Silicone Sealant
(100% Neutral Cure)
HARDWARE LIST
Allen wrench
4mm - 1pc
Washer
19x2 - 16pcs
Screw
M6x20 - 20pcs
For Warranty information, please visit: signaturehardware.com/services/warranty

2
INSTALLATION
1. Turn vanity cabinet upside down on soft surface.
Align mounting holes in feet with mounting points on
vanity cabinet.
FREY 60” VANITY
WITH VESSEL SINK
SKU: 949568, 949569, 949572

3
2. Using provided allen wrench (C) fasten feet to vanity
cabinet with washer (B) and screw (A) as shown.
FREY 60” VANITY
WITH VESSEL SINK
SKU: 949568, 949569, 949572

4
1. Apply a bead of silicone sealant around the top edge
of the vanity cabinet.
2. With assistance from another person, slowly and
carefully set the countertop onto the vanity cabinet.
Once positioned, press �rmly into place. Wipe away any
excess sealant using a damp cloth.
Important: The countertop is very fragile. Take caution
when handling, and have someone assist you.
3. If you are installing a side-splash and/or back-splash,
place a generous amount of silicone sealant on the
back of it and press it into place against your bathroom
wall. Fill any gaps that are left with silicone sealant. Wipe
away any excess sealant with a damp cloth.
4. Let the assembled vanity sit for 24 hours to allow all
the silicone sealant to fully dry. Once dry, proceed to
the installation of your faucet and drain.
Note: In some situations, it may be necessary to cut
the inner cabinet shelves to allow space for your
drain’s P-traps.
COUNTERTOP INSTALLATION
24 hr
FREY 60” VANITY
WITH VESSEL SINK
SKU: 949568, 949569, 949572

5
5. For stone tops, such as marble and granite, it is
recommended that you apply a high-quality sealer to
protect from staining and discoloration. Stone sealer
should be reapplied once or twice per year, depending
upon usage.
Stone Sealer
2. Turn the sink right-side-up and position over the 2"
drain hole.
1. Carefully place your vessel sink upside down on the
countertop. Apply a generous amount of silicone
sealant to the base of the sink where it will rest on the
counter.
SINK INSTALLATION
FREY 60” VANITY
WITH VESSEL SINK
SKU: 949568, 949569, 949572

6
3. If desired, apply a continuous bead of silicone
sealant around the perimeter of the sink base for
additional stability.
4. Remove any excess sealant to complete the sink
installation.
5. Let the assembled vanity sit for 24 hours to allow all
the silicone sealant to fully dry. Once dry, proceed to the
installation of your faucet and drain assemblies.
Note: In some situations, it may be necessary to cut the
inner cabinet shelves to allow space for your drain’s
P-traps.
24 hr
FREY 60” VANITY
WITH VESSEL SINK
SKU: 949568, 949569, 949572