SIIG AV-GM06P3-S1 User manual

1x4 VGA Splitter
P/N: AV-GM06P3-S1

Safety and Notice
The AV-GM06P3-S1 1x4 VGA Splitter has been tested for conformance to safety regulations
and requirements, and has been certified for international use. However, like all electronic
equipments, the AV-GM06P3-S1 should be used with care. Please read and follow the safety
instructions to protect yourself from possible injury and to minimize the risk of damage to the
unit.
●Follow all instructions and warnings marked on this unit.
●Do not attempt to service this unit yourself, except where explained in this manual.
●Provide proper ventilation and air circulation and do not use near water.
●Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
●Use only the power adapter and power cords and connection cables designed for this unit.
●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
TABLE OF CONTENTS
INTRODUCTION.................................................................................................................1
FEATURES.........................................................................................................................1
PACKAGE CONTENTS......................................................................................................1
SPECIFICATIONS..............................................................................................................2
PANEL DESCRIPTIONS.....................................................................................................3
HARDWARE INSTALLATION.............................................................................................4
CONNECTION DIAGRAM ..................................................................................................4
WARRANTY .......................................................................................................................5

1
INTRODUCTION
The AV-GM06P3-S1 1x4 VGA Splitter is designed to work as a duplicator and an amplifier at the
same time for VGA, component, or composite video applications. The AV-GM06P3-S1 not only takes
one video input from a VGA/YPbPr/CVBS source and immediately directs it to four VGA/YPbPr/CVBS
monitors or projectors, but also boosts and extends the signal up to 65m (210ft) without noticeable
signal loss or picture degradation.
FEATURES
●No software required
●Transmission distance up to 65m (210ft)
●Video bandwidth up to 400MHz
●Daisy-chain multiple units together for even more outputs
PACKAGE CONTENTS
●1x AV-GM06P3-S1
●1x DC 5V 2A wall wart
●1x User Manual

2
SPECIFICATIONS
Model Name
AV-GM06P3-S1
Technical
Output Ports
4
Supported input/output
VGA
Video bandwidth
400MHz
Video support
WUXGA [1920x1200@60] & UXGA [1600x1200@60] or even higher
Transmission
UXGA –65m [210ft]
Audio support
NO
VGA connector
HD-15 [15-pin D-sub female]
Mechanical
Housing
Metal case
Dimensions
[L x W x H]
Model
206 x 61 x 33mm [8.1” x 2.4” x 1.3”]
Package
325 x 196 x 92mm[12.7" x 7.7" x 3.6"]
Carton
490 x 426 x 352mm[1'6" x 1'4" x 1'2"]
Weight
Model
476g [1.1 lbs]
Package
1200g [2.5 lbs]
Fixedness
Inter-locked power supply
Power supply
5V 2A DC
Power consumption
5 Watt [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]

3
PANEL DESCRIPTIONS
Rear Panel
1. Power LED
2. +5V DC: Connect to 5V 2A DC interlocking power adapter
3. VGA OUT: VGA output to a remote video display
4. VGA IN: VGA input from a video source

4
HARDWARE INSTALLATION
1. Connect a PC source (or a component/composite source with a YPbPr-to-VGA adapter) to the
VGA/YPbPr/CVBS input of the AV-GM06P3-S1.
2. Connect two VGA monitors or projectors to the VGA outputs (or two component/composite
displays with two YPbPr-to-VGA adapters to the VGA outputs).
3. Plug power adapter cable into 5V DC power jack.
CONNECTION DIAGRAM

5
WARRANTY
The SELLER warrants the AV-GM06P3-S1 1x4 VGA Splitter to be free from defects in the
material and workmanship for 3 years from the date of purchase from the SELLER or an
authorized dealer. Should this product fail to be in good working order within 3 years
warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit
has not been subjected to accident, disaster, abuse or any unauthorized modifications
including static discharge and power surges.
Unit that fails under conditions other than those covered will be repaired at the current
price of parts and labor in effect at the time of repair. Such repairs are warranted for 90
days from the day of reshipment to the BUYER. If the unit is delivered by mail, customers
agree to insure the unit or assume the risk of loss or damage in transit. Under no
circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without
limitations, any other implied warranty or fitness or merchantability for any particular
purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan
are responsible for shipping charges to and from the SELLER. Cables are limited to a 30 day
warranty and cable must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate.
However, The SELLER assumes no responsibility for any inaccuracies that may be contained
in this manual. The SELLER will NOT be liable for direct, indirect, incidental, special, or
consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. Also, the technical information contained
herein regarding the AV-GM06P3-S1 features and specifications is subject to change
without further notice.
April, 2018
Support
For more info or tech support
http://www.siig.com/support