SIIG Dual Profile Hi-Speed USB 4-Port PCI User manual

1
Dual Profile Hi-Speed
USB 4-Port PCI
Quick Installation Guide
04-0469A
FeaturesandBenefits
• Compliant with USB specifications revision 2.0
• Conforms to PCI specifications revision 2.2
• Supports simultaneous operation of multiple
high-speed USB 2.0 and USB 1.1 devices
• Supports high-speed (480 Mbps), full-speed (12
Mbps), and low-speed (1.5 Mbps) data transfer
modes
• User friendly hot-swapping feature allows you to
attach/remove USB devices without turning off
your system
Note: USB1.1devicesarelimitedtoUSB1.1speeds
evenwhentheyareconnectedtoUSB2.0hostadapter
or USB 2.0 hubs.
SystemRequirements
PC:
• Pentium®-classcomputer with an available PCIslot
• Windows®2000 SP4 or later/XP SP1 or later/
Server 2003/Vista
Mac:
• Power Mac G3 (blue & white) or later with an
available PCI slot
• Mac OS 10.2.8 or later

2
PackageContents
•Dual Profile Hi-Speed USB 4-Port PCI
• Spare enhanced low profile bracket*
• Quick installation guide
Layout
Figure 1: Layout
Hardware Installation
* Note: For Low Profile systems, replace the currently
mounted bracket with the included Low Profile bracket.
General instructions for installing the card are provided
below. Since the design of computer cases and
motherboards vary, refer to your computer’s reference
manual for further information, if needed.
Static Electricity Discharge may permanently damage
your system. Discharge any static electricity build up in
your body by touching your computer's case for a few
seconds. Avoid any contact with internal parts and
handle card only by their external edges.
1. Turn OFF the power to your computer and any
other connected peripheral devices.
2. Unplugthepowercordandremoveyourcomputer's
cover.
Internal port
External ports

3
3. Remove the slot bracket from an available PCI slot.
4. Carefully align the card to the selected PCI slot,
push the board down firmly, but gently, until it is
well seated.
5. Replace the slot bracket holding screw to secure the
card.
6. Replacethecomputercoverandreconnectthepower
cord.
Windows Driver Installation
Windows 2000 Service Pack 4 or later, XP Service Pack 1
orlater,Server2003,andVistahavebuilt-indriversupport
for this controller. Just install the board and Windows
will automatically detect and install the correct drivers
for it. No additional driver is necessary.
ToVerifyWindowsInstallation
1. Right click My Computer. Then click Manage.
2. Windows 2000/XP/Server 2003: Click Device
Manager
3. Windows Vista™: Click Continue, then click
Device Manager
4. Under Universal Serial Bus controllers:
- NEC PCI to USB Open Host Controller
- NEC PCI to USB Open Host Controller
- Standard Enhanced PCI to USB Host
Controller
- USB 2.0 Root Hub
- USB Root Hub (3x)
Note: Windows XP will only show two USB Root
Hub.

4
Mac OS Driver Installation
Mac OS has built-in driver support for this controller.
Just install the board and Mac OS will automatically
detect and install the correct drivers for it. No additional
driver is necessary.
To Verify Mac OS Driver Installation
Mac OS X (v10.2.8)
The only way to verify the board works is actually
connecting devices to the USB ports.
Mac OS X (v10.3.0) or later
Check System Profiler to verify successfull installation.
Click Go, then Utilities. Double click System Profiler
Under USB
- USB High-Speed Bus
-USB Bus
- USB Bus

5
Blank Page

6
Blank Page

7
Technical Support and Warranty
QUESTIONS? SIIG’sOnlineSupporthasanswers! Simplyvisitour
web site at www.siig.com and click Support. Our online support
databaseisupdated daily withnewdriversandsolutions. Answers
toyourquestionscouldbejustafewclicksaway. Youcanalsosubmit
questions online and a technical support analysts will promptly
respond.
SIIGoffersa5-yearmanufacturerwarrantywiththisproduct. Please
see our web site for more warranty details. If you encounter any
problemswiththis product, pleasefollowtheproceduresbelow.
A) If it is within the store's return policy period, please return the
producttothestorewhereyoupurchasedfrom.
B) Ifyourpurchasehaspassedthestore'sreturnpolicyperiod,please
followthese steps to havetheproduct repaired or replaced.
Step1: SubmityourRMArequest.
Go to www.siig.com, click Support, then RMA to submit a
request to SIIG RMA. If the product is determined to be
defective,anRMAnumberwillbeissued. SIIGRMAdepartment
can also be reached at [phone].
Step2: After obtaining anRMAnumber, ship theproduct.
•Properlypacktheproductforshipping. Allsoftware,cable(s)
andanyotheraccessories that camewiththeoriginalpackage
mustbeincluded.
•Clearly write your RMA number on the top of the returned
package. SIIGwillrefusetoacceptanyshippingpackage,and
will not be responsible for a product returned without an
RMA number posted on the outside of the shipping carton.
•Youareresponsible for the costof shipping. Shipthe product
to the following address:
SIIG,Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA#:
•SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
nocosttothecustomer.

Dual Profile Hi-Speed 4-Port PCI is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered
trademarksofSIIG,Inc. MicrosoftandWindowsareregisteredtrademarksofMicrosoftCorporation.
PentiumisaregisteredtrademarkofIntelCorporation. MacandMacOSareregisteredtrademarksof
Apple Computer, Inc. Other names used in this publication are for identification only and may be
trademarksoftheirrespectivecompanies.
October,2007 Copyright© 2007 by SIIG,Inc. Allrightsreserved.
About SIIG, Inc.
Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturer
ofI/Oconnectivityproducts,includingPCI&ISAserialandparallel
ports,USB,SerialATA&UltraATAcontrollers,FireWire(1394a/b),
networking,soundcards,andotheraccessories. SIIG is the premier
one-stopsourceofupgrades.
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendly
features, and are backed by an extensive manufacturer warranty.
High-quality control standards are evident by the overall ease of
installation and compatibility of our products, as well as one of the
lowest defective return rates in the industry. SIIG products can be
found in computer retail stores, mail order catalogs, through major
distributors, system integrators, and VARs in the Americas and the
UK,andthroughe-commercesites.
PRODUCT NAME
Dual Profile Hi-Speed USB 4-Port PCI
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA