SIIG JU-DK0A11-S1 User manual

1. HDMI 1: Connect to 4K HDMI displays
(up to 4096x2160@60Hz)
2. HDMI 2: Connect to 4K HDMI displays
(up to 4096x2160@60Hz)
3. USB 3.0: Connect to a USB 3.0 device
(5 Gbps 5V/900mA)
4. USB 2.0: Connect to a USB 2.0 device
(480 Mbps 5V/500mA)
5. LAN: Gigabit Ethernet port
(Full Duplex 10/100/1000 Mbps)
6. Thunderbolt 3: Connect to Thunderbolt3
equipped computer with a Thunderbolt 3
port (Thunderbolt 3 - 40 Gbit/s)
Features
• Add two UHD 4K HDMI monitors at 60Hz
to your laptop with this portable
Thunderbolt 3 docking station
• Connect your device with 2x USB-A ports ,
1x USB 3.0 and 1x USB 2.0
• Add wired network connectivity with the
Gigabit Ethernet RJ-45 port
• Bus-powered (no external power required)
Package contents
• Thunderbolt 3 to Dual HDMI dock
• Quick Start Guide
Layout

Thunderbolt 3 to Dual
HDMI Video Hub LAN Dock
Quick Start Guide
04-1155A P/N: JU-DK0A11-S1
Support
For more info or tech support
http://www.siig.com/support
July, 2018 Copyright © 2018 by SIIG, Inc. All rights reserved.
NOTE:
In Windows 10 or 8.1 you might see a
pop-up message requesting permission
to allow the docking to connect to your
computer. If you see this pop-up message,
select Always Connect from the list and
click OK. If required, follow any other
on-screen instructions to complete the
installation.