SIIG Thunderbolt 3 Dual 4K Video Docking Station with Power... Product information sheet

1
Thunderbolt 3 Dual 4K Video Docking
Station with Power Delivery
User Reference Guide
P/N: JU-DK0711-S1
04-1124A

2
Introduction
The Thunderbolt 3 Dual 4K Video Docking Station with
Power Delivery adds multiple connectivity options to your
Thunderbolt 3 enabled MacBook Pro or Windows PC.
Features and Benefits
•Improve your workflow this docking station features
a Thunderbolt 3 port, five USB 3.0 ports (one with BC
1.2 charging), a HDMI port, one Gigabit Ethernet
port, a Headset jack (speakers/headphones/
microphone) and a SD memory card slot
•Experience high resolution graphics allowing you to
connect two 4K Ultra HD displays simultaneously
through a HDMI and Thunderbolt 3 port. A single 5K
display is supported through the Thunderbolt 3 port
•Supports data transfer rate up to 40Gb/s and daisy
chaining Thunderbolt 3 devices, such as monitors,
external hard drives and RAID storage
•Supports PD charging up to 60W to charge your
laptop
•Includes 135W power adapter to provide sufficient
power for your connected peripherals
System Requirements
•Desktop or laptop computer with an available
Thunderbolt 3 port
•Windows®10 (32-/64-bit) / 8.x (32-/64-bit) / 7 (32-/64-
bit)
•Mac OS X®10.12 or later

3
PackageContents
•Thunderbolt 3 Dual 4K Video Docking Station with
Power Delivery
•Power Adapter
•Thunderbolt 3 Cable
•User Reference Guide
Specifications
Connectors
Input:
1x 24-pin, Thunderbolt 3 USB-C, Female
Out p ut :
1x 24-pin, Thunderbolt 3 USB-C, Female
5x 9-pin, USB 3.0, Type-A, Fem ale
(one port supports BC 1.2 charging)
1x 8-pin, RJ45, Netwo rk, Fem ale
1x 19-pin, HDMI Type-A, Female
1x 3.5mm, headset jack, audio and microphone
1x SD memory card slot
USB data transfer rate Up to 5Gb/s
Compatible networks 10/100/1000 Mbps
Reso l u t io n Up to 4K @60Hz (HDMI)
Audio 2.1 Channel
Housing material Aluminum + Plastic
Power adapt er Input: AC 100-240V/ 50~60Hz
Output: DC 20V/6.75A
Dimensions 9.03"x3.43"x1.09"
Weight 0.99 lbs
Operating temperatur e 32 to 104 degr ees F
Stor age tem peratur e -4 to 158 degrees F

4
Layout
Figure 1: Front
• Power LED: Lights up when the power is on
• Connection LED: Lights up when a Thunderbolt 3
device is connected
• SD card slot: Insert a SD card (SD/SDHC/SDXC
card). Note: Insert SD card with contacts facing
downward
• USB 3.0 (x2): Connect to USB devices
• Headset jack: Connect to a speaker, earphone or
microphone
Figure 2: Back
SD card solt
Power LED
Connection LED USB 3.0 (x2)
USB 3.0 (x3)
Headset jack
• USB 3.0 (x3): Connect to USB devices
• RJ45 port: Connects to an Ethernet network
• Thunderbolt 3: Connect to Thunderbolt 3 devices
• Thunderbolt 3 source : Connects to Thunderbolt 3
source
• HDMI: Connects to HDMI display
• Power jack: Connects to the power adapter
RJ45 port Thunderbolt 3 HDMI
Power jack
Thunderbolt 3 source

5
Multi-Monitor Configuration
The add-on monitors can be configured by clicking
the utility icon and selecting DisplayLink Manager or
Video Setup. The configuration page can also be
opened using the steps below.
Position the mouse anywhere on the desktop:
1. For Windows 10: Right click, then select Display
settings.
2. For Windows 8 / 7: Right click, then select Screen
resolution.
Extended Mode
1. Refer to the Multi-Monitor Configuration to
open the configuration page.
2. In the Display drop-down menu, select the preferred
monitor.
For Windows 10 / 8 / 7: In the Multiple displays
drop-down menu, select Extend desktop to this
display.
3. Click APPLY to confirm and close the settings screen.
4. Once the setting is completed, simply drag and drop
the application icons or the opened window, in restore
down mode, to the add-on display. However, some
applications may not support the extended desktop
add-on display.

Mirror Mode
1. Refer to the Multi-Monitor Configuration on page 5
to open the configuration page.
2. In the Display drop-down menu, select the preferred
monitor.
For Windows 10 / 8 / 7: Check Multiple displays,
then select Duplicate these displays.
3. Click APPLY to save your changes.
Windows Shortcut
Press Windows key and Pto bring up the menu and
choose a desired mode.
Figure 3: Windows Shortcut
Cursor Disappearing
In some cases, when removing the Docking while in
extended mode, the desktop will still be paired to the
add-on monitor(s) and the mouse cursor may not return to
the primary monitor. If this happens, connect the add-on
monitor(s) and Docking again or keep moving the mouse.
Video Playback in Extended Mode
If the video or DVD playback quality is poor or skips
frames in the extended mode, please playback on the
primary monitor instead of the add-on monitors.

7
Mac Display Utility
Click the utility icon in the taskbar to change the modes or
resolutions, or double click System Preference, click the
Display icon, then select the Arrangement pane.
Setting the Display Resolutions
Select an available resolution from the Display
Preferences window. The resolutions available depend
on both the Docking Station and the capabilities of the
connected display.
Rotate
drop
down list
Resolution list
Figure 4
Rotating a Display
Configure the orientation using the Rotate drop down
box, see Figure 4. Select the appropriate angle of rotation
to match your display's set up.

8
Mirror
displays
Figure 5
Change the main display by simply dragging the
white menu bar between the displays.
Changing the Main Display
You can change the main display by moving the Menu Bar
between the displays. Changing the main display affects
where new windows appear and the position of the Docking
Station see Figure 5.
Setting the Display to Mirror/Extend Mode
Check Mirror Displays box on the Arrangement pane to
enable mirror mode. Uncheck the box to set the display to
extend mode. See Figure 5.

9
Application
The Thunderbolt 3 Dual 4K Video Docking Station with
Power Delivery is designed for extra connectivity demands.
Figure 6: Connections
Note: The Docking station supports daisy chaining of Thunderbolt 3 devices
equipped with an upstream and downstream port.

10
Blank page