INTRODUCTION
The AV-GM02M3-S1 HDMI Extender over Dual Cat.X (powered at TX) boosts up the audio/video
transmission distance up to 60m in HDTV 1080i format, 40m in HDTV 1080p format, or 20m in
HDTV 1080p with 36-bit color depth. With two cost effective solid category cables, users can readily
extend HDTV sources from DVD player, Blu-ray Disc player, PS3, PC, and any other kinds of sources
compliant with TMDS to distant display monitors including HDMI/DVI enabled TV sets or LCD PC
monitors. Therefore any HDMI source device can transmit utmost high quality video and audio over
great distance at minimal cost.
The AV-GM02M3-S1 includes two units: transmitting and receiving units. The transmitting unit
is used to capture the input HDMI or DVI signals and carry the signals through two RJ45 connectors
into two cost effective Cat-5/5e/6 cables. The receiving unit is responsible for equalizing the
transmitted HDMI signal. The transmission distance between the sending and receiving units can
be up to 60m at HD (720p/1080i) or 40m at Full HD (1080p). With an 8-level equalization rotary
control on the receiving unit, users can adjust the equalization strength to the received HDMI
signals accordingly, and therefore optimize the transmission distance between source and
destination.
FEATURES
●Support HDMI Deep Color & full 3D
●Extends the transmission distance up to 60m (200ft) from the sources under 1080i or 720p
●Extends the transmission distance up to 40m (130ft) from the sources under 1080p
●Provides independent DDC channel, fully HDCP compliant
●Minimizes the cable skew by adjustable 8-level equalization rotary control switch
●Pure unaltered uncompossed HDMI including DTS-HD Master & Dolby TrueHD
●Wall mounting housing design for easy and robust installation
●Perfectly integrated with other HDMI over Cat.X series products
PACKAGE CONTENTS
●1x AV-GM02M3-S1 [TX and RX]
●1x DC 5V 4A power supply
●1x User Manual
The claimed transmission distance here is subject to the grade of installed cable(s), source
device and display.
For over Cat.X/COAX transmission, the cable(s) has to be solid, not stranded. Any keystone
jack along the transmission path will kill the transmission performance significantly!
