SIIG CE-KV0511-S1 User manual

1
Introduction
The USB VGA KVM Console Extender over CAT5 allows for
keyboard and mouse control over a computer system
from either the local site or up to 150 meters away.
Features and Benets
• Control your computer system from transmitter
or receiver by USB Keyboard, Mouse, and
Monitor Console
• Supports high resolution video up to 1920 x 1080
• Transmission distance: Up to 150 meters over
standard CAT5 UTP network cable
• Supports VGA, SVGA and MultiSync monitors
• Local monitor supports DDC; DDC2; DDC2
System Requirements
• PC with an available VGA and USB port
Package Content
• USB VGA KVM Console Extender over CAT5
(Transmitter and Receiver)
• Power adapters (2)
• VGA with USB Type A cable
• Rubber pads (4)
• Quick installation guide
04-0895B
USB VGA KVM Console
Extender over CAT5
Quick Installation Guide

2
Application
Figure 1: Application
Transmitter
Receiver
PC with USB and
VGA port
Local console
(keyboard, mouse
and VGA display)
Remote console
(keyboard, mouse
and VGA display)
* Extension distance up to 150 meters
VGA with USB Type A cable
CATx cable
VGA cable

3
Layout
Figure 2: Front Panel of Transmitter
Figure 3: Rear Panel of Transmitter
• Remote LED: Blinks when activity is detected
• Local USB (mouse): Connects to local USB mouse
• Local VGA display: Connects to local VGA display
• Local USB (keyboard): Connects to local USB
keyboard
• PC: Connects to your computer system by using
the included VGA with USB Type A Cable
• RJ45: Connects to the Receiver's RJ45 port by
using one CATx cable (cable not included)
Remote LED Local USB
(mouse)
Local USB
(keyboard)
Local VGA
display
+DC 5V
Power LED
PC RJ45

4
• Power LED: On when power adapter is connected
• +DC 5V: Plug the included power adapter here
Figure 4: Front Panel of Receiver
Figure 5: Rear Panel of Receiver
Remote LED
Remote USB
(mouse)
Remote USB
(keyboard)
Remote VGA
display
+DC 5V
Adjusting RJ45
• Remote LED: Blinks when activity is detected
• Remote USB (mouse): Connects to remote USB
mouse
• Remote VGA display: Connects to remote VGA
display
• Remote USB (keyboard): Connects to remote
USB keyboard
Power LED

5
• Adjusting: Adjustment to get the clearest
picture possible. Refer to Adjusting Switch
section on the next page
• RJ45: Connects to the Transmitter's RJ45 port by
using one CATx cable (cable not included)
• Power LED: On when power adapter is connected
• +DC 5V: Plug the included power adapter here
Power Adapter Specications
• Round plug: 10mm (L) x 2.5mm (ID) x 5.5mm (OD)
• Input: 110-240V 50/60Hz
• Output: 5V / 1A
Hardware Installation
1. Connect the Transmitter's and Receiver's RJ45
ports by using one CATx cable (cable not
included)
2. Plug a USB keyboard and mouse (not included)
into the Transmitter's Local USB (keyboard)
and Local USB (mouse), then plug a VGA
display into the Transmitter's Local VGA output
by using a VGA cable (VGA cable not included).
L
OD ID
Figure 6

6
3. Connect your computer system to the Transmitter's
PC port by using the included VGA with USB
Type A Cable.
4. Plug a USB keyboard and mouse (not included)
into the Receiver's Local USB (keyboard) and
Local USB (mouse), then plug a VGA display
into the Receiver's Local VGA output by using a
VGA cable (VGA cable not included).
5. Plug the included power adapter into Transmitter's
and Receiver's +DC 5V power jack, then plug it
into a reliable power outlet.
6. The USB VGA KVM Console Extender over CAT5 is
ready for use.
Adjusting Switch
Match the display resolution under dierent CATx
cable lengths to get the clearest picture. Move the
switch through adjustment points, M, S or L, to nd
the best picture (see Figure 7). See Table 1 for the
recommended setting under different resolutions
and CATx cable lengths.
Figure 7: Adjusting Switch
Table 1: M / S / L Denition
M S L
Extension
distance
50-100
meters <50 meters 100-150 meters
Recommend
resolution
up to
1280x1024
up to
1920x1080
up to
1024x768

7
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web
site at www.siig.com and click Support. Our online support database is
updated daily with new drivers and solutions. Answers to your questions
could be just a few clicks away. You can also submit questions online and a
technical support analyst will promptly respond.
SIIG offers a 3-year manufacturer warranty with this product. This
warranty covers the original purchaser and guarantees the product to be
free of any defects in materials or workmanship for three (3) years from the
date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or
product having similar features and functionality) the product if defective
in materials or workmanship. This warranty gives you specic legal rights,
and you may also have other rights which vary from state to state. Please
see our web site for more warranty details.
If you encounter any problems with this product, please follow the
procedures below.
A) If it is within the store's return policy period, please return the product
to the store where you purchased it.
B) If your purchase has passed the store's return policy period, please
follow these steps to have the product repaired or replaced.
Step 1: Submit your RMA request. Go to www.siig.com, click Support,
then Request A Product Replacement to submit a request to SIIG RMA or
fax a request to 510-657-5962. Your RMA request will be processed, if the
product is determined to be defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
•
Properly pack the product for shipping. All software, cable(s) and any
other accessories that came with the original package must be included.
•Clearly write your RMA number on the top of the returned package.
SIIG will refuse to accept any shipping package, and will not be
responsible for a product returned without an RMA number posted
on the outside of the shipping carton.
•You are responsible for the cost of shipping to SIIG. Ship the
product to the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
•SIIG will ship the repaired or replaced product via Ground in the
U.S. and International Economy outside of the U.S. at no cost to the
customer.

USB VGA KVM Console Extender over CAT5
is a trademark of SIIG, Inc. SIIG and the SIIG
logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of
Microsoft Corporation. Mac and Mac OS are registered trademarks of Apple Inc. All other names
used in this publication are for identication only and may be trademarks of their respective owners.
Sep, 2018 Copyright © 2018 by SIIG, Inc. All rights reserved.
PRODUCT NAME
USB VGA KVM Console Extender over CAT5
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: [phone]
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire,
USB, and legacy I/O adapters) that bridge the connection between
Desktop/Notebook systems and external peripherals. SIIG continues to
grow by adding A/V and Digital Signage connectivity solutions to our
extensive portfolio. All centered around the distribution and switching
of A/V signals over CAT5/6, these products include matrix switches,
distribution ampliers, extenders, converters, splitters, cabling, and more.
SIIG is the premier one-stop source of upgrades and is committed
to providing high quality products while keeping economical and
competitive prices. High-quality control standards are evident by one
of the lowest defective return rates in the industry. Our products offer
comprehensive user manuals, user-friendly features, and most products
are backed by a lifetime warranty.
SIIG products can be found in many computer retail stores, mail order
catalogs, and e-commerce sites in the Americas, as well as through major
distributors, system integrators, and VARs.