SIIG CV-005B User manual

Mini Component to HDMI Converter
P/N: CV-005B

~ 1 ~
Safety and Notice
The CV-005B Mini Component to HDMI Converter has been tested for conformance to safety
regulations and requirements, and has been certified for international use. However, like all
electronic equipments, CV-005B should be used with care. Please read and follow the safety
instructions to protect yourself from possible injury and to minimize the risk of damage to the
unit.
Follow all instructions and warnings marked on this unit.
Do not attempt to service this unit yourself, except where explained in this manual.
Provide proper ventilation and air circulation and do not use near water.
Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
Use only the power adapter, power cords and connection cables designed for this unit.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.

~ 2 ~
The CV-005B Mini Component to HDMI Converter offers the highest compatibility among
component to HDMI in the market. This device supports component to HDMI conversion.
CV-005B supports the audio insertion of S/PDIF either thru RCA or TOSLINK connector into HDMI
output! With this extra feature, users can combine asynchronous video and audio sources into
the state-of-art HDMI compliant A/V signal for having high standard A/V experiences!
CV-005B is designed to ease the conversion between the legacy YPbPr format to the most
popular HDMI with affordable cost. With this mini converter, the bothersome video format
issues will not become a bottleneck in your applications and the handy audio support can make
the input video and audio become HDMI ready.
Features
Supports HDMI 1.2 compliant
Supports HDCP 1.2
Multiple channel or stereo S/PDIF support
Digital S/PDIF audio insertion support for HDMI audio *
USB Firmware upgradable to guarantee the latest HDMI compatibility.
Connect only one S/PDIF thru either RCA or TOSLINK connector!
Introduction

~ 3 ~
Specifications & Package Contents
Model Name
CV-005B
Technical
HDMI/DVI Output
Compliance
HDMI 1.2
Digital video
bandwidth
2.2Gbps
Analog video
bandwidth
74.25MHz
Analog audio
bandwidth
20 ~ 20KHz
Maximum resolution
1080p@30 / 1080i@60
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, TTL]
Input
1x YPbPr + 1xUSB + 1x RCA + 1x TOSLINK
Output
1x HDMI
S/PDIF support
48KHz/2CH or Multi CH
ESD protection
[1] Human body model —±19kV [air-gap discharge] & ±12kV [contact
discharge]
[2] Core chipset —±2kV
PCB stack-up
4-layer board [impedance control —differential 100; single 50]
HDMI connector
Type A
TOSLINK connector
S/PDIF
RCA connector
USB connector
Mini-Type A
DC connector
P 1.3
DIP switch
1 pin DIP switch for HDCP ON/OFF
Mechanical
Housing
Metal enclosure
Dimensions
(L x W x H)
Model
125 x 165 x 28mm [4.9” x 6.5” x 1.1”]
Package
140 x 200 x 75mm [5.5”x 7.9”x 3”]
Carton
420 x 400 x 300mm [1’8”x 1’4”x 11.8”]
Weight
Model
485g [1.1 lbs]
Package
1190g [2.6 lbs]
Power supply
5V 0.85A DC
Power consumption
Watts [max]
Operation
temperature
0~40C [32~104F]
Storage temperature
-20~60C [-4~140F]
Relative humidity
20~90% RH [no condensation]
Package Contents
1x CV-005B
1x 5V 0.85 A interlocked power adapter
1x User Manual

~ 4 ~
Front Panel
1. Component –Y input
2. Component –Pb input
3. Component –Pr input
4. Signal indicator LED
5. S/PDIF audio input
6. S/PDIF audio input
Rear Panel
7. Display indicator LED
8. HDMI output
9. Dip Switch for HDCP
10.Firmware update
11.5V Power
Panel Descriptions
P A N E L D E S C R IP T IO N S
Hardware Installation

~ 5 ~
1. Connect your YPbPr source to the input connector.
2. Connect your S/PDIF source to the input connect, and remember only thru either RCA or
TOSLINK connector.
3. Connect your HDMI enabled monitors into the device’s HDMI output port.
4. Power up the CV-005B.
Connection Diagram
P A N E L D E S C R IP T IO N S

~ 6 ~
Switch Position


HDCP
On
OFF
User can decide if the output HDMI supports HDCP or not using the built-in 1 DIP switch!
1. As the video formats evolves and expands, CV-005B is firmware upgradable for this
fashion.
2. S/PDIF supports only 48kHz audio sample rate. Other than this rate, the input digital audio
should be adjusted to 48kHz in order to get audio signal correctly sent.
1. For the LED on the YPbPr panel, “Orange” means power on but no active signal detected,
and “Green” means both power and active signal are detected!
2. For the LED on HDMI panel, “Orange” means power on but no HDMI equipped display
detected, and “Green” means both power and HDMI equipped monitor are detected!
Notice
HDCP Setting
LED Indication

~ 7 ~
The SELLER warrants the CV-005B Mini Component to HDMI Converter to be free from defects in the
material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer.
Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its
option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster,
abuse or any unauthorized modifications including static discharge and power surges. This warranty is
offered by the SELLER for its BUYER with direct transaction only. This warranty is void if the warranty seal
on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the current price of parts
and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of
reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume
the risk of loss or damage in transit. Under no circumstances will a unit be accepted without a return
authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations, any
other implied warranty or fitness or merchantability for any particular purpose, all of which are expressly
disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible
for shipping charges to and from the SELLER. Cables are limited to a 30 day warranty and cable must be
free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate. However, The
SELLER assumes no responsibility for any inaccuracies that may be contained in this manual. The SELLER
will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any
defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical
information contained herein regarding the CV-005B features and specifications is subject to change
without further notice.
April, 2018
Limited Warranty
Support
For more info or tech support
http://www.siig.com/support