SIIG AV-GM09G3-S1 User manual

8x1 HD/SD-SDI Switch
P/N:

Safety and Notice
The AV-GM09H3-S1 8x1 HD/SD-SDI Switch has been tested for conformance to safety
regulations and requirements, and has been certified for international use. However, like all
electronic equipments, the AV-GM09H3-S1 should be used with care. Please read and follow
the safety instructions to protect yourself from possible injury and to minimize the risk of
damage to the unit.
●Follow all instructions and warnings marked on this unit.
●Do not attempt to service this unit yourself, except where explained in this manual.
●Provide proper ventilation and air circulation and do not use near water.
●Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
●Use only the power adapter and power cords and connection cables designed for this unit.
●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
TABLE OF CONTENTS
INTRODUCTION.................................................................................................................1
FEATURES.........................................................................................................................1
PACKAGE CONTENTS ......................................................................................................1
SPECIFICATIONS ..............................................................................................................2
PANEL DESCRIPTIONS.....................................................................................................3
HARDWARE INSTALLATION.............................................................................................5
IR REMOTE CONTROL......................................................................................................5
WARRANTY........................................................................................................................6

1
*Optional upon request
*Optional upon request
INTRODUCTION
The AV-GM09H3-S1 receives,
equalizes, and reclocks* up to 8 SDI
inputs, perfectly switches the desired
input to SDI equipped monitors or
receivers. The switch supports both
HD/SD-SDI bit rates, and the
re-transmitted quality is guaranteed.
Through RS-232, IR remote, or front
panel push button, the control of the
SDI switch becomes versatile and
easier. AV-GM09H3-S1 offers the
most convenient and cost effective
means for swift switch and
duplication of high quality SDI in the
market.
FEATURES
●HD / SD-SDI switch
●Up to 8 input & re-timing SDI outputs*
●Dual color indication LED of HD / SD of the output SDI
●Automatic detection of the SDI Input
●Synchronizes input/output (switch after vertical sync)
●Provides the equalized and reclocked* transmission path up to 300m (1000ft) at SD-SDI or 150m
(500ft) at HD-SDI
●Multiple control by RS-232, IR remote, and push button
PACKAGE CONTENTS
●1 x AV-GM09G3-S1 / AV-GM09J3-S1 / AV-GM09H3-S1 / AV-GM09K3-S1

2
●1 x IR remote controller
●1 x 5V power adapter
●1 x User Manual
SPECIFICATIONS
Model Name
AV-GM09G3-S1
AV-GM09J3-S1
AV-GM09H3-S1
AV-GM09K3-S1
Technical
Role of usage
5x1 switch
5x2 matrix switch
8x1 switch
8x2 matrix
switch
SDI standards
SD-SDI & HD-SDI
Auto HD/SD-SDI detection
Yes
Supported protocols
SMPTE 259M / SMPTE 292M
Video bandwidth
Single-link [1.485Gpbs & 1.485/1.001Gbps]
Data rates
143 / 270 / 1483 / 1485 Mbps
Video support
[HD] 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30
[SD] [email protected]Hz, PAL@50Hz
Output impedance
75
Reclocking function
Optional upon request
Cable equalization
[HD-SDI] up to 150m (500ft) / [SD-SDI] up to 300m (1000ft)
Loop-out
Synchronized BNC loop-out at input and output
Audio support
Yes
RP-918 pathological
patterns
Immune
PCB stack-up
4-layer board [impedance control —differential 100; single 50]
Input
5x BNC [SDI]
5x BNC [SDI]
8x BNC [SDI]
8x BNC [SDI]
Output
1x BNC [SDI]
2x BNC [SDI]
1x BNC [SDI]
2x BNC [SDI]
BNC connector
75inter-locked socket
Eye pattern characteristics
(HD-SDI)
Amplitude: Within 800mV ±3%
(<10%)
Rise overshoot: Less than 2% (<10%)
Fall overshoot: Less than 2% (<10%)
Long time jitter: 0.195UI (<1.0UI)
Timing jitter: 0.195UI (<1.0UI)
Alignment jitter: 0.127UI (<0.2UI)
Mechanical
Housing
Metal case
Dimensions
[L x W x H]
Model
187 x 125 x 43mm [7.4”x4.9”x1.7”]
Package
330 x 200 x 95mm [1’1“x7.9”x3.7”]
Carton
495 x 440x 380mm [1‘7.5”x1’5.3”x1’3”]
Weight
Model
890g [2.0 lbs]
890g [2.0 lbs]
890g [2.0 lbs]
890g [2.0 lbs]
Package
g [ lbs]
g [ lbs]
g [ lbs]
g [ lbs]
Fixedness
Inter-locked power supply
Power supply
5V 4A DC
Power consumption
10 Watts [max]
Operation temperature
0~40C [32~104F]
Storage temperature
-20~60C [-4~140F]

3
Relative humidity
20~90% RH [no condensation]
PANEL DESCRIPTIONS
Front Panel
1. Chosen input channel LED
2. Input channel auto detection LED
3. Output HD/SD detection LED
4. IR remote receiver
5. Power indicator LED
6. Push button for input channel switch
Rear Panel
7. Power switch
8. RS-232 control port for PC control
The measurement results are from Tektronix VFM-700 with SDI through 1m (3.3ft) long
Belden 1694A.

4
9. Synchronized signal loop-out (add 75terminator if not connect)
10. 5V DC power jack
11. Synchronized SDI signal input
12. SDI output
13. SDI input

5
HARDWARE INSTALLATION
1. Connect SDI enable equipments to the output of AV-GM09H3-S1.
2. Connect the SDI input sources to the inputs of AV-GM09H3-S1.
3. Plug power adapter cable into 5V DC power jack.
4. Use IR remote, RS-232, or front panel push button to switch between input channels.
\
IR REMOTE CONTROL
: To the right
: Channel 1
: Channel 2
: Channel 3
: Channel 4
: Channel 5
: Channel 6
: Channel 7
: Channel 8
: Reserved
: Reserved
: Reserved
: Reserved
: To the left

6
WARRANTY
The SELLER warrants the AV-GM09H3-S1 8x1 HD/SD-SDI Switch to be free from defects
in the material and workmanship for 3 years from the date of purchase from the SELLER or
an authorized dealer. Should this product fail to be in good working order within 3 years
warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit
has not been subjected to accident, disaster, abuse or any unauthorized modifications
including static discharge and power surges.
Unit that fails under conditions other than those covered will be repaired at the current
price of parts and labor in effect at the time of repair. Such repairs are warranted for 90
days from the day of reshipment to the BUYER. If the unit is delivered by mail, customers
agree to insure the unit or assume the risk of loss or damage in transit. Under no
circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without
limitations, any other implied warranty or fitness or merchantability for any particular
purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan
are responsible for shipping charges to and from the SELLER. Cables are limited to a 30 day
warranty and cable must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate.
However, The SELLER assumes no responsibility for any inaccuracies that may be contained
in this manual. The SELLER will NOT be liable for direct, indirect, incidental, special, or
consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. Also, the technical information contained herein
regarding the AV-GM09H3-S1 features and specifications is subject to change without
further notice.
April, 2018
Support
For more info or tech support
http://www.siig.com/support