SIIG AV-GM09V3-S1E User manual

8x1 VGA/Component/S-Video/Composite
Switch with Audio & Ethernet Control
P/N:

Safety and Notice
The AV-GM09V3-S1E 8x1 VGA/Component/S-Video/Composite Switch with Audio & Ethernet
Control has been tested for conformance to safety regulations and requirements, and has
been certified for international use. However, like all electronic equipments, the
AV-GM09V3-S1E should be used with care. Please read and follow the safety instructions to
protect yourself from possible injury and to minimize the risk of damage to the unit.
●Follow all instructions and warnings marked on this unit.
●Do not attempt to service this unit yourself, except where explained in this manual.
●Provide proper ventilation and air circulation and do not use near water.
●Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
●Use only the power adapter and power cords and connection cables designed for this unit.
●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
TABLE OF CONTENTS
INTRODUCTION.................................................................................................................1
FEATURES.........................................................................................................................1
PACKAGE CONTENTS......................................................................................................1
SPECIFICATIONS..............................................................................................................2
PANEL DESCRIPTIONS.....................................................................................................3
CHANNEL CONTROL ........................................................................................................4
HARDWARE INSTALLATION.............................................................................................8
CONNECTION DIAGRAM ..................................................................................................8
PIN DEFINITION.................................................................................................................9
WARRANTY .....................................................................................................................10

1
INTRODUCTION
The AV-GM09V3-S1E 8x1 VGA/Component/S-Video/Composite Switch with Audio & Ethernet
Control receives and amplifies up to 8 VGA inputs, perfectly switches the desired input to the VGA
equipped monitor or receiver. The switch supports VGA video up to 350MHz. The re-transmitted
video quality is guaranteed and the longest transmission is up to 65m (210ft). Therefore,
AV-GM09V3-S1E offers the most convenient and cost effective means for swift switch of high quality
PC graphics and HDTV videos with crystal clear audio in the market. With equipped audio switch,
AV-GM09V3-S1E is ready to be as a switch with stereo audio and ideally for boardroom, showroom,
and exhibition. The control of AV-GM09V3-S1E is versatile and easier through the IR remote control,
the push button on front panel, Ethernet control, or the RS-232 control on rear panel.
FEATURES
●VGA/component/S-video/composite switch with 350MHz bandwidth
●Up to 8 graphics/video inputs
●LED indication
●Ethernet accessible
●Automatic detection of the VGA/component input
●Amplified video output with transmission length up to 65m (210-ft)
●Multiple control by IR remote, push button, Ethernet, and RS-232 control
●1U rack mountable
PACKAGE CONTENTS
●1x AV-GM09V3-S1E
●1x DC 5V 4A in-line with C7 power cord
●1x IR Remote control
●1x Rack-mounting ear set
●1x Installation software CD
●1x User Manual

2
SPECIFICATIONS
Model Name
AV-GM09V3-S1E
Technical
Role of usage
8x1 switch
Supported
input/output
VGA / Component / S-video / Composite*
Video bandwidth
350MHz
Video support
1080p60, WUXGA [1920x1200@60] & UXGA [1600x1200@60] or even
higher
Transmission
UXGA [1600x1200] –65m [210ft]
Audio support
Analog stereo
Input
8x VGA [component/s-video/composite through adapters]
8x 3.5mm analog stereo audio
1x RS-232
Output
1x VGA [component / s-video / composite through adapters]
1x 3.5mm analog stereo audio
VGA connector
HD-15 [15-pin D-sub female]
RS-232 connector
DE-9 [9-pin D-sub female]
3.5mm connector
Earphone jack for analog stereo audio
RJ-45 connector
WE/SS 8P8C
Input selection
IR remote / push button / RS-232 control / Ethernet
IR remote control
Electro-optical characteristics: = 25° / Carrier frequency: 36-40kHz
Mechanical
Dimensions
[L x W x H]
Model
1RU –440 x 66 x 44mm [1'5.3" x 2.6" x 1.7"]
Package
510 x 230 x 70mm [1'8" x 9.1" x 2.8"]
Carton
510 x 410 x 252mm [1'8" x 1'4" x 10"]
Weight
Model
1100g [2.4 lbs]
Package
1890g [4. 2lbs]
Fixedness
1RU rack-mount with ears
Power supply
5V 4A DC
Power consumption
13 Watt [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]

3
PANEL DESCRIPTIONS
Front Panel
1.Infrared sensor
2.LED indicator for power
3.LED indicator for VGA input #1 ~ #8
Rear Panel
4.3.5mm audio socket for audio source #1 ~ #8
5.3.5mm audio socket for selected audio output
6.VGA input source #1 ~ #8
7.Selected VGA output
8.Etherent Control
9.RS-232 control port
10.5V DC power jack
* Component and composite input/output can be done by using the optional accessory
VGA-to-Component adapter to connect to the VGA socket. However, for S-Video
input/output, please find a VGA-to-S-video adapter available in the market to fulfill you need.

4
CHANNEL CONTROL
IR remote cotrol
Key
Code
Function
0x03
Turn on/off AV-GM09V3-S1E
0x02
Switch from the selected input to the next
input channel
0x01
Switch from the selected input back to the
prior input channel
0x04
Select INPUT 1 to be the input source
0x05
Select INPUT 2 to be the input source
0x06
Select INPUT 3 to be the input source
0x07
Select INPUT 4 to be the input source
0x08
Select INPUT 5 to be the input source
0x09
Select INPUT 6 to be the input source
0x0a
Select INPUT 7 to be the input source
0x1b
Select INPUT 8 to be the input source
0x1f
Reserved
0x0c
Turn on/off AUTO DETECT which allows
the input source can be automatically
changed once the selected input is
disconnected
0x0d
Reserved
0x0e
Reserved

5
Software Control via the RS-232 or Ethernet port
Scan Device
Automatically scan the COM port connected to AV-GM09V3-S1E
String table
Freely setting the name of the inputs
AUTO DETECT function is used for checking input signal existed or not. Enable this
function will make the output port switching to the next available input in sequential
order when the currently selected input signal is lost. Disable this function will make the
AV-GM09V3-S1E stay at the currently selected input even if the input signal is lost.
1
2
3
1
2

6
Ethernet Setting
Ethernet
Users have to define Ethernet properties through RS-232 for the matrix. All the
parameters for Ethernet have to be saved into the Switcher by clicking on “Write To
Device” button.
Communication
Users can choose the control interface between Switcher and PC host.
3

7
1. Please notice that Ethernet control has a higher priority than RS-232. If RS-232 and
Ethernet controls come from 2 different hosts, commands may coincide and in this case,
commands from Ethernet will be effective immediately no matter whether commands
from RS-232 are accurately sent and executed!
2. Initial or any change to Ethernet settings, users MUST power cycle VGA matrix in order
to get the network settings effective!

8
HARDWARE INSTALLATION
1. Connect VGA/component/s-video/composite display/projector to the output of AV-GM09V3-S1E.
2. Connect the VGA/component/s-video/composite source devices to the inputs of
AV-GM09V3-S1E.
3. Plug power adapter cable into 5V DC power jack.
4. Use IR remote or push button on the front panel to switch between inputs, or connect a
computer through RS-232 port to switch the VGA/component/s-video/composite input sources.
CONNECTION DIAGRAM