SIIG JU-H70411-S2 User manual

1
USB 3.0 & 2.0 Hub
Quick Installation Guide
04-0654B
Introduction
The USB 3.0 & 2.0 Hub quickly adds multiple USB
ports to your PC system and expands data transfer
rate up to 5Gb/s.
Key Features and Benefits
• Wide clearance between USB ports to avoid
interference between USB devices
• Supports data transfer rates up to 5Gb/s
• Over current protection built in
• Comes with 5V/4A adapter to fulfill
power hungry USB devices (for JU-
H70411-S2 & JU-H40812-S1 only)
System Requirements
• Desktop or notebook PC with an available
USB port (USB 3.0 recommended)
• Windows®8 (32-/64-bit) / Windows 7 (32-
/64-bit) / Vista (32-/64-bit) / XP (32-/64-
bit) / Server 2003 & 2008 (32-/64-bit) /
Server 2008 R2

2
Package Contents
•USB 3.0 & 2.0 Hub
• USB 3.0 cable (Type-A to Type-B)
• Power adapter (5V/4A for JU-H70411-S2
& JU-H40812-S1; 5V/2A for JU-H70212-
S2)
• Quick installation guide
Layout
JU-H70411-S2 & JU-H70212-S2
Figure 1: Layout Front
Power adapter jack
Upstream port (Type-B)
USB 3.0 downstream ports
Power LED

3
Figure 2: Layout Back
USB 2.0 downstream ports
JU-H40812-S1
Figure 3: Layout Front
USB 3.0 downstream ports

4
Device Connections
•Upstream Port (Type-B): connect to an available USB
3.0 port of the computer using the included USB 3.0
cable
•USB 3.0 downstream ports: connect your USB 3.0
devices here
•USB 2.0 downstream ports: connect your USB 2.0
devices here
•Power adapter jack: connect the included power
adapter here
Important: This hub only works at USB 3.0 speed
when connected to a USB 3.0 host adapter.
USB 3.0 Cable Connectors
Figure 4: Layout Back
Upstream port (Type-B)
Power adapter jack
Figure 5: Type-A connector (left) & Type-B connector (right)

5
Installation
1. Connect the Type-B connector of the
included USB 3.0 cable to the Upstream
port (Type-B) of the hub.
2. Connect the Power adapter into the Power
adapter jack of the hub, then plug the
power adapter into a reliable power source.
3. Plug the Type-A connector of the included
USB 3.0 cable into an available USB port
(USB 3.0 recommended) of the computer,
and the driver will install automatically.
4. The hub is ready for use.
To Verify Successful Installation
1. Check in Device Manager.
For Windows 8 / Windows 7 / XP / Server 2008
R2 & 2003: Right click Computer or My
Computer, click Manage, click Device
Manager.
For Windows Vista: Right click Computer,
click Manage, Continue, and Device
Manager.

6
For Server 2008: Right click Computer,
click Manage, double click Diagnostics,
and click Device Manager.
2. Double click Universal Serial Bus
controllers.
For Windows 8
When connected to a USB 3.0 host adapter:
Generic SuperSpeed USB Hub should be
listed.
When connected to a USB 2.0 host adapter:
Generic USB Hub should be listed twice.
For Windows 7 / Server 2008 R2 / Vista / XP
/ Server 2008 & 2003
When connected to a USB 3.0 host adapter:
NEC Electronics USB Hub will be listed
three times or Renesas Electronics USB
3.0 Hub will be listed one time and
Renesas Electronics USB 2.0 Hub will be
listed twice.
When connected to a USB 2.0 host adapter:
Generic USB Hub should be listed twice.

7
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily with
new drivers and solutions. Answers to your questions could be just a few clicks away.
You can also submit questions online and a technical support analyst will promptly
respond.
SIIG offers a 5-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for five (5) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product
having similar features and functionality) the product if defective in materials or
workmanship. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request
will be processed, if the product is determined to be defective, an RMA number will
be issued.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All accessories that came with the
original package must be included.
• Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping
carton.
• You are responsible for the cost of shipping to SIIG. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.

About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebooksystems andexternal peripherals. SIIGcontinues togrow byadding
A/V and Digital Signage connectivity solutions to our extensive portfolio.
SIIGproducts offercomprehensive user manuals,many user-friendlyfeatures,
and are backed by an extensive manufacturer warranty. High quality control
standards are evident by the overall ease of installation and compatibility of
our products, as well as one of the lowest defective return rates in the industry.
SIIG products can be found in computer retail stores, mail order catalogs,
throughmajor distributors, system integrators, and VARs in the Americas and
the UK, and through e-commerce sites.
USB 3.0 & 2.0 Hub is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks
of SIIG, Inc. All other names used in this publication are for identification only and may be
trademarks of their respective owners.
August, 2012 Copyright © 2012 by SIIG, Inc. All rights reserved.
PRODUCTNAME
USB 3.0 & 2.0 Hub
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG,Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: [phone]