SIIG CE-KV0011-S1 User manual

1
2x1 USB HDMI KVM Switch
Quick Installation Guide
04-0747A
Introduction
The 2x1 USB HDMI KVM Switch shares one
HDMI display between two HDMI sources.
Key Features and Benefits
• Share an HDTV or display, USB keyboard
& mouse, and microphone between 2 USB/
HDMI computers and devices
• Provides 2 additional USB 2.0 sharing ports
with over-current detection and protection
• Switch between devices via front push
button or hotkey
• Supports 1080p with 36-bit Deep Color
and PC's UXGA 1920x1200 resolutions
• Supports Dolby True HD and DTS HD
Master Audio formats
• HDMI v1.3 & HDCP compliant
• Video bandwidth: up to 2.25Gb/s
• Metal housing for better RF shielding

2
Layout
Figure 1: Front Panel Layout
Select
USB Ports USB Keyboard
& Mouse Ports
MIC HDMI
OUTPUT
LED
Package Contents
• 2x1 USB HDMI KVM Switch
• Power adapter
• 2 cable sets
• Quick installation guide
Compatibility
• Windows, Mac, Linux computers
• Game consoles, Blu-Ray DVD players, and
other CE devices

3
Figure 2: Rear Panel Layout
•Power Jack: Connect to the included power
adapter
•HDMI INPUT: Connect to source device's
HDMI
•MIC: Connect to PC's MIC
•USB Port: Connect to PC's USB port
Power Jack
HDMI
INPUT MIC USB Port
•USB Ports: Connect to other USB devices
•USB Keyboard & Mouse Ports: Connect to
USB keyboard and mouse devices
•MIC: Connect to microphone
•HDMI OUTPUT: Connect to HDMI display
•LED: Indicate which HDMI source is
selected
•SELECT: Switch between the HDMI sources

4
Hardware Installation
1. Power off all devices you plan to connect to
this switch.
2. Connect a monitor/display to the switch's
OUTPUT HDMI connector using a HDMI
cable (not included).
3. Connect a USB keyboard and a USB mouse
to the dedicated USB keyboard and mouse
ports on the switch.
4. Connect the computer's HDMI connector
to the switch's INPUT 1 connector using
the included HDMI cable.
5. Connect the computer’s USB port to the
switch's PC1 connector (USB Type B) using
the included USB cable.
6. Connect the computer's microphone
connector to the switch's MIC port
associated with PC1 using the included
3.5mm mini-jack audio cable.
7. Repeat steps 4 to 6 for a second computer
system/device you wish to connect to this
switch.

5
8. Optional: Connect other USB peripherals
you wish to share between the connected
computers/devices to the extra USB ports
on the switch.
9. Connect the power adapter into the switch's
Power Jack.
10. Power up the first computer/device and
wait until it is fully booted up, verify the
keyboard and mouse to make sure they
function properly.
11. Once the first computer system is
successfully setup, press the Switch button
and power up the second computer/device
to verify the setup properly.
12. The installation is complete and the 2x1
USB HDMI KVM Switch is ready for use.
Note: 1 of the 2 connected devices has to be
a PC with a USB connection to enable the
switching mechanism. If you wish to
connect a DVD player or game console to
this switch, make sure the PC is connected
to HDMI INPUT1.

6
Hotkey
Follow the hotkey command listed below for
selected operating functions:

7
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily with
new drivers and solutions. Answers to your questions could be just a few clicks away. You
can also submit questions online and a technical support analyst will promptly respond.
SIIG offers a 3-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for three (3) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product having
similar features and functionality) the product if defective in materials or workmanship.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA or
fax a request to 510-657-5962. Your RMA request will be processed, if the product
is determined to be defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All accessories that came with the
original package must be included.
• Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping
carton.
• You are responsible for the cost of shipping to SIIG. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.

About SIIG, Inc.
Foundedin1985,SIIG,Inc.isaleadingmanufacturerofITconnectivitysolutions
(including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy
I/O adapters) that bridge the connection between Desktop/Notebook systems
and external peripherals. SIIG continues to grow by adding A/V and Digital
Signage connectivity solutions to our extensive portfolio.
SIIG products offer comprehensive user manuals, many user-friendly features,
and are backed by an extensive manufacturer warranty. High quality control
standards are evident by the overall ease of installation and compatibility of
our products, as well as one of the lowest defective return rates in the industry.
SIIG products can be found in computer retail stores, mail order catalogs,
through major distributors, system integrators, and VARs in the Americas and
the UK, and through e-commerce sites.
PRODUCTNAME
2x1 USB HDMI KVM Switch
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG,Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: [phone]
2x1 USB HDMI KVM Switch is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered
trademarks of SIIG, Inc. All other names used in this publication are for identification only
and may be trademarks of their respective owners.
November, 2011 Copyright © 2011 by SIIG, Inc. All rights reserved