SIIG CE-H21112-S1 User manual

1
Sync/Charging Hub +
Reader for Galaxy Tablets
Quick Installation Guide
04-0805A
Introduction
The Sync/Charging Hub+Reader for Galaxy Tablets
allows you to sync, charge, import images, videos,
music and more for a variety of Galaxy Tablets.
Key Features and Benefits
• Switchable sync/charging cable - choose
data synchronization or charging modes
• Supports MicroSD/MicroSDHC/T-Flash /
microMMC memory cards for PC & Mac
• Two USB 2.0 ports for connecting USB
devices (PC & Mac only)
• Compatible with Galaxy Tab 7.0/7.0 Plus/
7.7/8.9/10.1, Galaxy Tab 2 7.0/10.1
Package Contents
• Sync/Charging Hub+Reader for Galaxy
Tablets
• Quick installation guide

2
Layout
Figure 1: Layout
1 Data/Charging Switch:
Data mode: USB 2.0 hub and cardreader
for your PC or Mac computer or sync with
your Galaxy Tablet
Charge mode: Charges your Galaxy Tablet
2 USB 2.0 port: Connects USB devices to
your desktop or notebook computer
3 microSD slot: Insert your memory cards to
transfer files to your computer
4 USB 2.0 port: Connects USB devices to
your desktop or notebook computer
5 USB 2.0 Type A connector: Connects to
computer or Galaxy Tablet charger
6 30-pin Connector: Connects to your Galaxy
Tablet

3
Synchronizing your Data
1. Move the switch to Data mode.
2. Connect your Galaxy Tablet to the cable's
30-pin Connector.
3. Connect the other end of the cable to your
computer's USB port.
4. Sync to the Galaxy Tablet just as you would
with the original Samsung cable.
Charging Your Galaxy Tablet
Connect to Computer
Note: Charging your Galaxy Tablet may interfere
with other connected USB devices, in this case,
we recommend charging with an AC adapter or
car charger.
1. Move the switch to Charge mode.
2. Connect your Galaxy Tablet to the cable's
30-pin Connector.
3. Connect the other end of the cable to your
computer's USB port. The Galaxy Tablet
will charge automatically.

4
AC Adapter Charging
1. Connect your Galaxy Tablet to the cable's
30-pin Connector.
2.Move the switch to Charge mode.
3. Connect the other end of the cable to your
AC adapter. Plug the AC adapter into a
reliable power outlet. The Galaxy Tablet
will charge automatically.
Figure 4: AC Adapter Charging

5
Car Charger
It is recommended to use a car charger with
minimum 1A power output.
1. Connect your Galaxy Tablet to the cable's
30-pin Connector.
2. Move the switch to Charge mode.
3. Connect the other end of the cable to your
car charger. Plug the car charger into a
reliable power outlet. The Galaxy Tablet
will charge automatically.
Figure 5: Car Charger

6
USB 2.0 Hub & microSD Cardreader
The USB 2.0 Hub & microSD Cardreader are
supported only on Windows®7/Vista/XP and
Mac OS®X 10.5 or later desktop or notebook
computers.
1. Move the switch to Data mode.
2. Connect the cable's USB 2.0 Type A
connector to your computer's USB port.
The drivers will install automatically.
3. The USB 2.0 Hub and microSD Cardreader
are ready for use.
Figure 6: Connect USB Devices
Figure 7: Insert Memory Card with Gold Pins Facing Up

7
Technical Support and Warranty
SIIG offers a 1-year manufacturer warranty with this product. This warranty covers the original
purchaser and guarantees the product to be free of any defects in materials or workmanship for one
(1) year from the date of purchase of the product. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below. If your purchase
has passed the store's return policy period, please follow the steps below to have the product repaired
or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT to submit a
request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the
product is determined to be defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product. Properly pack the product for shipping.
All accessories that came with the original package must be included.Clearly write your RMA
number on the top of the returned package. SIIG will refuse to accept any shipping package, and will
not be responsible for a product returned without an RMA number posted on the outside of the
shipping carton. You are responsible for the cost of shipping to SIIG. Ship the product to the following
address:
SIIG, Inc. 6078 Stewart Avenue Fremont, CA 94538-3152, USA
RMA #:
SIIG will ship the repaired or replaced product via Ground in the U.S. and International Economy
outside of the U.S. at no cost to the customer.
Sync/Charging Hub+Reader for Galaxy Tablets is a trademark of SIIG, Inc. SIIG and the SIIG logo are
registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and
may be trademarks of their respective owners.
May, 2012 Copyright © 2012 by SIIG, Inc. All rights reserved.
PRODUCT NAME
Sync/Charging Hub+Reader for Galaxy Tablets
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: [phone]