SIIG CE07 Series User manual

1
Wireless Audio Link (Mobile)
Quick Installation Guide
Introducing the Wireless Audio Link
The Wireless Audio Link plays music from any portable
audio device or computer on any FM equipped stereo
source. Wirelessly transmits the audio using FM
frequencies. No batteries required.
Features and Benefits
• Modulation: FM from 88.1 to 88.9 MHZ
• Channel: 5 channels
• Distance: 10 meters
• 5V supplied voltage at 22 mA current
• Power requirement: USB Bus Power or
External Power
Serial # Sticker
For future product return or exchange, this serial # is
required. Please keep it for your reference.
04-0290A

2
Requirements
• A powered USB port
PackageContents
• (1) Wireless Audio
• (1) Audio cable
• (1) Car power adapter
• This quick installation guide
Layout
To USB port Frequency
selection switches
Audio input
Figure 1. Layout
Installation
1. Connect this unit to a USB port for power. Make
sure the USB port actually has power.
2. Insert one end of the audio cable into the unit. Only
one end fits this jack.

3
3. Insert the other end of the audio cable to your audio
source's output jack.
4. Adjust the frequency on your FM equipped audio
device to match the Wireless Audio Link's. The
default frequency is set at 88.1 MHZ.
5. You should now hear music from your audio source
in your FM equipped audio device. Turn on the
volume if necessary.
Frequency Selections
Figure 2. Frequency Selections
Sw 1 Sw 2 Sw 3 Sw 4Frequency
MHZ
OFF OFF OFF
OFF OFF
OFF OFF OFF
OFF OFF
OFF OFF
ON
ON ON
ON
ON ON
ON ON
88.1
88.3
88.5
88.7
88.9
(Default)

Technical Support
QUESTIONS? SIIG’s Online Support has the answers!
Simply visit our web site at www.siig.com and click on
Support. Our online support database is updated daily
with new drivers and solutions. The answers to your
problems could be just a few clicks away.
PRODUCT NAME MODEL NUMBER
Wireless Audio Link CE07xx
FCC RULES: TESTED TO COMPLY WITH FCC PART 15,
CLASS B OPERATING ENVIRONMENT: FOR HOME OR
OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
THE PARTY RESPONSIBLE FOR
PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Ave.
Fremont, CA 94538-3152
Wireless Audio Link is a trademark of SIIG, Inc. All other names
used in this publication are for identification only and may be
trademarks of their respective companies.
November, 2002 Copyright ©2002 by SIIG, Inc.