SIIG Wireless Audio Link Pro User manual

1
WirelessAudioLinkPro
QuickInstallationGuide
Introducing the Wireless Audio Link Pro
The Wireless Audio Link Pro plays music from any
portable audio device or computer on any FM radio.
ItwirelesslytransmitstheaudiousingFMfrequencies.
No batteries are required.
Serial # Sticker
For future product return or exchange, this serial # is
required. Please keep it for your reference.
04-0302D

2
FeaturesandBenefits
•Transmitts stereo sound from any MP3 player
or other portable audio devices to your car's FM
radio
•Supports 12 FM channels (88.1-88.9 MHz &
106.7-107.9 MHz) with last channel memory
•Over current protection and LCD display for
easy readability
•No battery required, obtains power via cigarette
lighter adapter
Requirements
•Cigarette lighter adapter
PackageContents
•Wireless Audio Link Pro
•Quick Installation Guide

3
Figure 1. Layout
FrequencySelection
Switches
AudioInput
Jack
On/OffSwitch
LCDDisplay
CigaretteLighter
Adapter
Layout

4
Installation
1. Connect the Wireless Audio Link Pro to a
cigarette lighter adapter.
2. Insert the Wireless Audio Link Pro's Audio Input
Jack into either the audio out or headphone
jack of your MP3 player or other audio source.
3. Turn on the Wireless Audio Link Pro.
4. Turn on your audio source and adjust it's
volume to at least 50% of maximum.
5. Adjust the frequency of your FM radio to
match the Wireless Audio Link Pro.
6. You should now hear music from your FM
radio. Turn up the volume if necessary.
Note: Trees, buildings, mountains, power
lines, cell phones and other wireless devices,
the weather and other vehicles can interfere
with the FM signal. Depending on your
area, from time to time, you may need to
change the frequency of the Wireless Audio
Link Pro to get the best sound quality.
When changing the frequency, remember
to adjust the FM radio to match the Wireless
Audio Link Pro.

5
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers!
Simplyvisitourwebsiteatwww.siig.comandclickon
Support. Our online support database is updated
daily with new drivers and solutions. Answers to
your questions could be just a few clicks away. You
can also submit questions online and a technical
support analysts will promptly respond.
A 5-year manufacturer warranty supplied with this
productisofferedbySIIG,Inc. PleaseseeSIIGwebsite
for more warranty details. If you should happen to
encounter any problems with this product, please
follow the procedures below.
If it is within the store's return policy period, please
return the product to the store where you purchased
from. If your purchase has passed the store's return
policy period, please follow these steps to have the
product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then RMA to
submit a request to SIIG RMA. If the product is
determined to be defective, an RMA number will be
issued. SIIG RMA department can also be reached at
[phone].

6
Step 2: After obtaining an RMA number, ship the
product.
•Properly pack the product for shipping. All
accessoriesthatcamewith theoriginal packagemust
beincluded.
•Clearly write your RMA number on the top of the
returned package. SIIG will refuse to accept any
shipping package, and will not be responsible for a
productreturnedwithoutanRMAnumberpostedon
the outside of the shipping carton.
•You are responsible for the cost of shipping the
product to SIIG at the following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538
RMA #: ________________
•SIIG will ship the repaired or replaced product via
GroundintheU.S.andInternationalEconomyoutside
of the U.S. at no cost to the customer.

7
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading computer
upgrade manufacturer of I/O connectivity products,
including PCI & ISA serial and parallel ports, USB,
SerialATA&UltraATAcontrollers,FireWire(1394a/
b), Networking, Sound Cards, and other accessories.
SIIG is the premier one-stop source of upgrades.
SIIG products offer comprehensive user manuals,
many user-friendly features, and are backed by an
extensive manufacturer warranty. High-quality
control standards are evident by the overall ease of
installationandcompatibilityofourproducts,aswell
as one of the lowest defective return rates in the
industry. SIIG products can be found in computer
retail stores, mail order catalogs, and e-commerce
sites in the Americas and the UK, as well as through
major distributors, system integrators, and VARs.

WirelessAudioLinkProisatrademarkofSIIG,Inc.SIIGandSIIGlogo
are registered trademarks of SIIG, Inc. Other names used in this
publicationareforidentificationonlyandmaybetrademarksoftheir
respectivecompanies.
March,2006 Copyright ©2006bySIIG,Inc.Allrightsreserved.
PRODUCTNAME
Wireless Audio Link Pro
FCC RULES: TESTEDTO COMPLYWITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG,Inc.
6078 Stewart Ave.
Fremont, CA 94538-3152