Silent Gliss SG 3000 User manual

Installation and User Manual
June 2019
Cord operated curtain track systems
SG 3000 / SG 3900
EN
Page 1 of 8
EN

EN
Page 2 of 8
Contents
General overview........................................................................................................................................3
Transportation, storage ..............................................................................................................................3
Installation ..................................................................................................................................................4
Maintenance...............................................................................................................................................4
EU Conformity............................................................................................................................................4
Ceiling Fitting .............................................................................................................................................5
Wall Fitting..................................................................................................................................................6
Faults and Troubleshooting........................................................................................................................7

EN
Page 3 of 8
1 General Overview
1.1 User information
The Operating and Installation Instructions help
to acquaint you with the product and its possible
applications. They contain important tips to
support the correct and safe operation of the
product. Please retain a copy of this manual.
It is to be read, understood and adhered to by
each person who works with or on the system in
the following tasks: installation, operation,
maintenance and cleaning, troubleshooting.
This manual does not replace your personal
responsibility as fitter or operator.
1.2 Intended use / Guarantee
The product is intended for use exclusively in
accordance with these specifications and this
manual, i.e. for: Internal shading of windows
(no outdoor installation).
A different use or use beyond this scope is not
considered intended use. The manufacturer /
supplier is not liable for any resulting damage.
Non-compliance releases Silent Gliss from its
liability.
The guarantee excludes faults that are not
attributable to material or fabrication faults, but
have arisen as a result of incorrect operation by
the purchaser or improper care or other personal
negligence. Troubleshooting measures falling
outside of the guarantee will be carried out by
Silent Gliss or another appropriate retailer at the
cost of the purchaser.
1.3 Other applicable documents
Every product supplied includes documents that
are a component part of the operating and
installation instructions: safety instructions, scale
drawing, installation instructions.
1.4 Safety instructions
The relevant safety laws in the country of
operation must be adhered to.
The following tips or symbols are used
throughout:
Warning - risk of injury! Highlights
possible hazards from mechanical
workings which could lead to injury or
even death.
Use eye protection! Eye protections
must be worn during all drilling work.
General warning sign!
Highlights general information.
The product may be installed only in a faultless
condition (no transportation damage, etc.) and
only as intended, in awareness of safety and
hazards and in accordance with all tips in this
manual.
Faults that could impair safety and functionality
must be repaired.
The user (end customer) must have read and
understood the operating instructions after
installation and operational start-up are
completed.
1.5 Maintenance, inspection and repair tips
Work must only be carried out by
qualified specialists.
2 Transportation, Storage
2.1 Transportation
The product may be transported only
in suitable and sufficient protective
packaging (manufacturer’s packaging).
Curved products (rails, etc.) require
wooden crating.
Waste and packaging material is to be disposed
of in line with local regulations.
Keep packaging material out of the reach of
children. Packing sheets, Styrofoam pieces and
other small parts can be dangerous for children
to play with.
2.2 Storage
Products and their accessories are to
be stored in suitable packaging in
dust-free spaces with normal humidity.

EN
Page 4 of 8
3 Installation
3.1 Installation instructions, aids and personal
protection
Local safety regulations must be
observed during installation of the
product (stable ladders, etc.).
Warning! (if applicable)
Young children can be strangled by
loops in pull cords, chains, tapes and
inner cords that operate the product.
To avoid strangulation and
entanglement, keep cords out of the
reach of young children. Cords may
become wrapped around a child’s
neck. Move beds, cots and furniture away from
window covering cords. Do not tie cords together.
Make sure cords do not twist and create a loop.
3.2 Motorisation
Electrical installation must be carried
out by a certified electrician in
accordance with the legal regulations
and standards of the relevant country.
3.3 Unpacking
Unpack components carefully
Waste and packaging material is to be
disposed of in line with local
regulations. Keep packaging material
out of the reach of children. Packing sheets,
Styrofoam pieces and other small parts can be
dangerous for children to play with. Check
delivery items against delivery note.
3.4 System handling
Please note the following during
unpacking and installation: a) do not
cause contamination from unwashed
hands.
b) do not allow moisture to get on the fabric. c)
avoid causing kinks and snags (e.g. by dragging
over surfaces and edges).
3.5 Overhead and wall installation
During installation, window handles
and other protruding items and fittings
must not impair the function of the
product. The fixing material should be
chosen to suit the background. The fitter is
responsible for selecting the correct fixing
materials.
Check: Raise and lower blind and check correct
winding and square hanging of the fabric.
4 Maintenance
4.1 Repairs / Inspection
Any repair work required by the system
may only be carried out by authorised
specialists.
Only original replacement parts may be
used for repairs.
4.2 Cleaning
The product and its components, such
as mouldings end caps, etc., must not
be treated with aggressive cleaning
products. It is best cleaned with a
slightly damp cloth.
For heavier soiling, warm water with a neutral,
non-abrasive cleaning product (pH-neutral
domestic washing-up liquid) may be used.
4.3 Care hints for fabrics
Washable! Do not tumble dry
Do not iron! Do not dry clean!
Do not bleach!
4.4 Disposal
The product must be disposed of in
line with local waste disposal
regulations for industrial waste.
5 EU Conformity
EU conformity has been certified. This
documentation can be requested from Silent
Gliss.

EN
Page 5 of 8
6 Installation
6.1 Ceiling installation
6.1.1 SG 3000 / SG 3900
3
1 2
System A (mm) B (mm) C (mm)
SG 3000 150 Max. 600 150
SG 3900 100 Max. 600 100
A CB B
SG 3000
min. 60 min. 120
SG 3900
min. 60 min. 120

EN
Page 6 of 8
6.2 Wall installation
6.2.1 SG 3000 / SG 3900
3
1 2
A CB B
Click
System A (mm) B (mm) C (mm)
SG 3000 150 Max. 600 150
SG 3900 100 Max. 600 100

EN
Page 7 of 8
7 Faults and Troubleshooting
Possible fault Possible cause Elimination of the fault
Curtain is difficult to move Profile was not siliconized Siliconize profile
Curtain weight is too heavy Fit additional clamps
The profile is bent or the number of clamps or take a larger profile
is not sufficient
Curtain weight is too heavy Fit additional clamps
System has fallen down or the number of clamps or take a larger profile
is not sufficient
Curtain weight is too heavy Mount pilot runner correctly
Cord is torn or pilot runner has not been on string and tighten
properly mounted and tightened

EN
Page 8 of 8
www.silentgliss.co.uk