HunterDouglas Duette SkyLift User manual

Top Rail
Bottom Rail
Inside Mount
Installation
Bracket
Side
Rail
(Left)
Moving
Rail
Bottom
Corner
Bracket
Spacer
Blocks
Moving
Rail
End Cap
Top
Corner
Bracket
Tension
Cable
Bottom Tension
Plate and Screw
Outside Mount
Installation
Bracket
Tension Screw
and
Top Tension
Plate
Corner Cover
Side
Rail
(Right)
Crank Handle (Optional)
Extension Pole (Optional)
Control Knob
L
R
SkyLift™ Manual
Duette® Honeycomb Shades
SPECIFICATIONS
Minimum Width 12"
Maximum Width 96"
Minimum Height 12"
Maximum Height
Varies based on width of shade
Extension Pole Sizes 6' or 10'
Hardware Colors
Aspen White, Bronze, Gardenia White
MOUNTING REQUIREMENTS
Inside Mount 2-1/2" depth minimum
Outside Mount Surface Height 1-1/4" minimum
Recommended width overlap per side 2"
CRANK HANDLE (must be specified)
CLEARANCE NEEDED
Below Bottom Rail 1-1/2" Height
Depth in Front of Bottom Rail 1" Depth
082919
Hunter Douglas Hospitality’s products
vary in weight and require specific
mounting points. Suitable mounting
surface and structural support where
needed is to be provided by others.

OPERATION
Operate the Shade
■If you have an extension pole: Set the extension pole to the correct length, if
necessary.
➤Locate the pole lock and press the lock in firmly.
➤Slide the pole extension until it locks in place at the correct length.
MOUNTING
Inside Mount
Shade fits within
window opening.
Outside Mount
Shade mounts outside
window opening.
HARDWARE COLORS
Aspen White
Gardenia White
Bronze (pictured to the left)
Images are for refernce only.
For actual color, please
send sample request to
[email protected]

OPERATION
To Lower the Shade
■Rotate the crank handle or the extension pole counterclockwise to lower the shade.
To Raise the Shade
■Rotate the crank handle or the extension pole clockwise to raise the shade.