Silhouette BLS 58 User manual

Fusion

Glazing|Fusion
Optimal lens base curve is 5.0 Other curves are possible
and will require frame adjustments
Glaze with Silhouette mounting pliers with blue tip and
BLS 58/98/97

Inclination | Fusion
3
1. Open temple
2. Support lens fixation firmly
with mounting pliers
3. Hold temple at hinge and
adjust inclination at the end
piece to the desired position

Temple Opening| Fusion
Reduce Enlarge

Temple disassembly| Fusion
1. Place red multi-tool at the hinge as pictured. Select suitable diameter of
multi-tool, according to distance between temple and lens
2. For best protection, please place a cloth between red multi-tool and lens
3. Close temple and apply pressure behind round part.
4. Temple will loosen with a click

Temple Assembly | Fusion
1. Place end piece exactly at
holes of SPX-temple
2. Apply counter pressure to
endpiece
3. Press SPX-temple into hinge
4. Press the temple inward as
shown in picture

Adjust Temple End| Fusion
Metal core inside temple cover allows
cold adjustment of temple bend
Bend temple cover in large curves