Silhouette Studio User manual

The Studio Collection

Temple Disassembly
Place disassembly tool (AC 336) between
lens and temple using the neccessary
diameter on tool.
Press
Close temple and press together behind
disassembly tool (AC 336).

Inclination
Adjust inclination with pliers.
Enclose loop completely with sideparts of pliers.
Dismount temple.
Hold the lens fixation with mounting
pliers (P 0023).

Reduction of temple opening Enlarging temple opening
Dismount temple.
Hold lens fixation firmly with pliers.
Bend side parts with long nose pliers
NOTE: Protect the side parts with plastic
or leather.
Dismount temple.
Hold lens fixation firmly with pliers.
Support pliers with your thumb to avoid
the lens from slipping.
Reduce temple opening by placing pressure
against the safe edge of a table.

Temple Mounting Version 1 Temple Mounting Version 2
Place sideparts at opening of SPX temple and press together.
Press
Press

Temple Curving
Curve temple ends in large movements.
Do not heat or fold.