Silhouette TITAN IMPRESSIONS User manual

TITAN IMPRESSIONS

TEMPLE DISASSEMBLY
1. Hold the frame side parts with the mounting pliers.
2. Slightly bend the temple, and pull it straight backwards out of the disc-hinge
ATTENTION: Only pull the temple backwards, not up or down.

FIXING BLS-HINGE
Always use a new disc when installing the temple. Place BLS disc hinge on both sides of
the loop.
NOTE: The oval shape of the BLS‘ plug system ensures correct positioning.

TEMPLE ASSEMBLY
Align the temple at the slot of the disc hinge. Push temple carefully forwards,
until it clicks all the way in.

INCLINATION
1. Remove the temple and hinge disc.
2. Hold lens fixation firmly in its
position with mounting pliers.
3. Hold flat pliers at the hinge
loop and carefully bend to the
desired position.
Inclination
groove
Inclination
groove

TEMPLE END DISASSEMBLY
1. Loosen the glue by pressing the beginning of
the temple end softly with the flat pliers.
Protect temple surface with a cleaning cloth.
2. Pull off temple end in a small
rotating motion.
NOTE: This temple design cannot be shortened

TEMPLE CURVING - ADJUSTMENT
Curve temple and temple end in a large, gradual motion.
Do not use a frame warmer or bend the metal of the frame.