Silvalea M921509 User manual

Do NOT use clip sling attachments on a
loop type spreader bar and Do NOT use
loop sling attachments on a stud type
spreader bar.
Reference: HMK-IOU
Product Code/s: M921509 - SupernePlus®, M921510 - Mesh
Revision: 05.08.2020
Copyright & Design Rights: Silvalea.
MESH
SUPERFINE PLUS®
Fastt Deluxe Hammock Sling
Instructions of Use
STANDARD RANGE
WARNING
Head Support Straps Head Support Straps
Inner Leg Straps
Modesty
Strap
Hip Strap
Shoulder
Strap
Outer Leg
Strap
Inner Leg Straps
Modesty
Strap
Hip Strap
Shoulder
Strap
Outer Leg
Strap
Loop Sling Attachments - Loop Type Spreader Bars:
Please note there are many variations of the loop type
spreader bar but they should all be used exclusively
by slings with: LOOP SLING ATTACHMENTS

Sling Application:
With sling label facing outwards glide sling down
back of patient. Ensure sling is tted as low as possible
towards the seat.
Take the outer leg strap on one side and thread it
through the inner leg strap.
Slide both leg sections of the sling under both thighs
ensuring that the sling is not twisted.
The leg sections can be held together by passing the leg
strap through the red modesty strap on the opposite leg.
Repeat on the other side.
1 2
3 4

5
Once the sling has been tted correctly to your patient
attach the appropriate shoulder & leg strap loops to the
spreader bar on lift.
Color coding on the pick up loops are provided for ease
of reference and position. Ensure all straps are attached
securely.
Sling Application Continued:
6
Adjust the head support strap to a suitable position.
Then loop the head support strap back through the
plastic slider correctly.
Adjust the head support to suit patient’s needs by
adjusting the amount of tape passed through the slider.
7
If supplied with hip strap, attach webbing strap to the
lift. Check fitting and ensure all straps are attached
securely before commencing the transfer.
8
NOTE: Once the sling takes the weight of the patient
you may need to re-adjust the position of the sling
for the patient’s comfort.
Lower the patient back onto the chair/bed to make
any adjustments before continuing the transfer.

General Instructions: Warning
Do not attempt to transfer the patient until
all appropriate sling attachments are secured to
the lift spreader bar and you are satised that the
sling is the correct style, size and t for the patient.
Correct sizing of a sling is important as a sling that is
too large could cause the patient to slip through the
aperture.
While every attempt is made to instruct a safe move
you must conform to the current moving and handling
procedures/regulations. If in any doubt, consult your
Moving and Handling Advisor.
Service Label & Sling Checks:
All products should be checked each time they are
used for any signs of deterioration.
The service label is a visual guide to the product’s
check. Please conduct a thorough sling check in line
with current safety requirements in your country.
If in doubt consult your distributor for current sling
checking protocols.
A risk assessment must be carried out to ensure
that the correct size and style of sling has been
met before use.
Pre-use sling check list:
• braiding/straps for deterioration and fraying
• material for holes/snagging
• compatibility with the lift
• safe working load of both the lift and sling/
product (if applicable)
• label is legible
Remove from use immediately if there are any signs
of deterioration to the sling or straps or the label
is illegible.
Washing Guidelines:
• Follow laundry temperatures for washing and drying
detailed on the product label.
• Always ensure that all Hook & Loop fastenings are
fully closed before washing.
• All products should be laundered using non-
biological detergents.
• DO NOT IRON
Product Care:
• Ensure that any Hook & Loop fastenings are closed
when not in use. This will prevent unnecessary
snagging of the sling material and prevent clogging
of the Hook & Loop.
• Launder regularly.
• Store products in a suitable dry clean place.
• Silvalea will accept no liability for any additions/
adaptations made to our products that have NOT
been carried out by ourselves. Doing so may cause
serious injury or death to the patient.
Drying Guidelines:
• Follow the recommended drying temperatures
as stated on product label.
• Overheating a textile product can cause
deterioration in the material components.
• Do not place the product on a convector heater
or steam pipes.
SWL 272kg/600lb/42st