Silvercrest SCHW A1 User manual

WIRELESS CHARGING CAR
MOUNT/
SOPORTE DE CARGA
INALÁMBRICA PARA AUTO
SCHW A1
WIRELESS CHARGING CAR MOUNT
Operation and Safety Notes
SOPORTE DE CARGA INALÁMBRICA PARA
AUTO
Instrucciones de utilización y de seguridad
IAN 337714_1907 IAN 337714_1907
Distributed by/Distribuido por:
LIDL US, LLC, Arlington, VA 22202
Model No./Modelo Núm.: HG06002B-US
Version /Versión: 12/2019
Made in/Hecho en: China

US-EN
Operation and Safety Notes Page 3
US-ES
Instrucciones de utilización y de seguridad Página 19

US-EN 3
Description of signal words ............. Page 4
Customer service.................................. Page 4
Introduction ............................................ Page 5
Intended use............................................ Page 5
Trademark notices................................... Page 5
Scope of delivery.................................... Page 6
Important safety instructions.......... Page 6
Description of parts............................. Page 10
Technical data........................................ Page 12
Before use ............................................... Page 13
Operation................................................ Page 13
Storage when not in use ................... Page 15
Cleaning ................................................... Page 15
Troubleshooting.................................... Page 16
Disposal.................................................... Page 16
Three year limited warranty........... Page 17

US-EN 4
DESCRIPTION OF
SIGNAL WORDS
WARNING indicates a hazardous situation that, if
not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that,
if not avoided, could result in minor or moderate
injury.
NOTICE indicates information considered
important, but not hazard related (e.g. messages
related to property damage).
CUSTOMER SERVICE
Visit a LIDL store for further assistance.
Please have your IAN number ready.
Call customer service at
1 [phone]
Visit the Website Customer Service
Platform at
www.lidl.com/contact-us
IAN 337714_1907

US-EN 5
Call customer service at
1 [phone]
WIRELESS CHARGING CAR
MOUNT
PIntroduction
Congratulations on your purchase. You have selected
a quality product. The instructions for use are a part
of the product. They contain important information
about the safety, use and disposal of the product.
Before using the product, please learn about all
the safety information and usage instructions. Only
use the product as described and for the specified
applications. If you lend the product to someone else,
please also give all the instructions.
PIntended use
The WIRELESS CHARGING CAR MOUNT (hereinafter
referred to as the „Product“) is an information
electronics device. This product is only for charging
mobile devices that use Qi technology. Other devices
cannot be charged with the product. The product is
intended for private use only and not for commercial
use. The manufacturer accepts no liability for damage
resulting from unauthorised modifications or improper
use.
PTrademark notices
 USB®is a registered trademark of USB
Implementers Forum, Inc.
 “Qi“ and the Qi logo mark are trademark of the
Wireless Power Consortium (WPC).
 The SilverCrest trademark and trade name is the
property of their respective owners.
 Any other names and products are trademarks or
registered trademarks of their respective owners.

US-EN 6
PScope of delivery
1 Wireless charging car mount
1 Car charger adaptor
1 Micro USB to USB type A cable
1 Instructions for use
IMPORTANT
SAFETY
INSTRUCTIONS
READ ALL INSTRUCTIONS. KEEP FOR
FUTURE REFERENCE. INCLUDE ALL
DOCUMENTATION WHEN PASSING THIS
PRODUCT ON TO OTHERS.
DANGER TO LIFE AND RISK OF ACCIDENT
FOR INFANTS AND CHILDREN!
Risk of suffocation!
Never leave children unsupervised with the packaging
material. The packaging materials pose a suffocation
hazard. Children frequently underestimate the dangers.
The packaging materials are not a toy. This product is
not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use
of the product by a person responsible for their safety.
Children should be supervised to ensure that they do
not play with the product.

US-EN 7
Risk of property damage
This product does not contain any parts which can
be serviced by the user.
Keep the product away from moisture, dripping and
splashing water!
Do not place burning candles or other open fire on
or next to the product.
Check the product before every use! Discontinue
use if any damage to the product or the charging
cable is detected!
If you notice smoke or an unusual noise or odor,
unplug the product immediately and remove the
USB cable.
Sudden temperature changes may cause
condensation inside the product. In this case, allow
the product to acclimatise for some time before
using it again to prevent short circuits!
Do not operate the product near heat sources, e.g.
radiators or other devices emitting heat!
Do not try to open the product! It has no internal parts
requiring maintenance.
Radio interference
Never use the product on airplanes, in hospitals,
service rooms, or near medical electronic systems.
The wireless signals transmitted could impact the
functionality of sensitive electronics.
Keep the product at least 0.65 ft

US-EN 8
from pacemakers or implantable cardioverter-
defibrillators, as the electromagnetic radiation may
impair the functionality of pacemakers.
 The radio waves transmitted could cause
interference in hearing aids.
 Do not place the product near flammable gases or
potentially explosive areas (e.g. paint shops) with
the wireless components on, as the radio waves
emitted can cause explosions and fire.
 The range of the radio waves varies by
environmental conditions. In the event of wireless
data transmission, unauthorized third parties
receiving the data cannot be excluded.
 Lidl US, LLC is not responsible for interference
with radios or televisions due to unauthorized
modification of the product. Lidl US, LLC further
assumes no liability for using or replacing cables
and products not distributed by Lidl US/ LLC.
The user of the product id fully responsible for
correcting interference caused by such unauthorized
modification to the product, as well as replacement
of such products.
Ensure that:
 no direct heat sources (e.g. heating) can affect the
product
 the product is not exposed to bright artificial light
 any contact with splashed and dripping water and
corrosive liquids is avoided and the product are not
operated in the vicinity of water. In particular, the
product should never be submerged in liquid; do
not place any vessels filled with liquid, for example,
vases or drinks, on or near the product
 the product is not used in the immediate vicinity of
magnetic fields (e.g. speakers)

US-EN 9
 no fire sources (e.g.burning candles) are placed on
or near the product
 no foreign objects penetrate the product
 the product is never subjected to extreme
temperature fluctuations as this could result in
condensation and electrical short circuits. If the
product were subjected to extreme temperature
fluctuations, however, wait (2 hours) until the
product has reached ambient temperature before
use
 the product is never subjected to excessive shocks
and vibrations
 the connected cables are always laid in such a
manner that nobody can step on or trip over them.
There is a risk of injury
 no objects are placed on a connected cable
and cables are not connected over sharp edges
because this could otherwise damage the
functionality of sensitive electronics.
Changes or modification to this product not expressly
approved by the party responsible for compliance
could void the user‘s authority to operate the product.
This product has been tested and complies with the
limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This product generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.

US-EN 10
However, there is no guarantee that interference will
not occur in a particular installation. If this product
causes harmful interference to radio or television
reception, which can be determined by turning the
product off and on, the user is encouraged to try and
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and
receiver.
• Connect the equipment to an outlet on a different
circuit than the one the receiver is connected to.
• Consult the dealer or an experienced radio / TV
technician for help.
This product complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This product may not cause harmful interference, and
(2) this product must accept any interference received,
including interference that may cause undesired
operation.
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located
or operating in conjunction with any other antenna or
transmitter.
SAVE THESE
INSTRUCTIONS
PDescription of parts
1Qi charging area
2LED indicator
3Mount locking lever

US-EN 11
1 2 3
9 8 7
54
6

US-EN 12
4Suction cup
5Micro USB port
6Smartphone grab rail
7Micro USB to USB type A cable
8Car charger adaptor
9Instructions for use
PTechnical data
Charging holder
dimensions: 4 39⁄64 in x 2 7⁄8in x 2 3⁄64 in
(117 mm x 73 mm x 52 mm)
Suction cup part
dimensions: 5 33⁄64 in x 3 5⁄64 in
(140 mm x 78 mm)
Weight: 0.38 lb (173 g)
Operating temperature: 41 - 95 °F (5 – 35 °C)
Storage temperature: 32 - 113 °F (0 – 45 °C)
Humidity
(no condensation): 10 – 70 %
Cable length: 39 3⁄8in (100 cm)
Input voltage/ current: 5 V 2 A
9 V 1.7 A
12 V 1.25 A
Wireless charging power: 10W max.
Frequency band: 113.301kHz to
146.635kHz
Transmitted maximum
radio frequency power
(H-field): 87.79dBuV/m at
3m distance
Wireless charging
distance: ≤ 5 mm
NOTE: The specification and design may be
changed without notification.

US-EN 13
PBefore use
 All parts have to be unpacked and the packaging
materials have to be removed completely.
 Before use, verify the package contents are
complete and undamaged!
POperation
ATTENTION! The product must not be charged at
a PC or notebook due to the high power consumption.
NOTE:
 The product only supports devices with Qi wireless
technology.
Attaching the car holder
Find a visible, easily-accessible spot for your holder on
the dashboard or windscreen of your car.
Some treatments on the dashboard /windscreen or
dirt on the suction cup 4may result in a significantly
less effective bond, so before you start, remove such
treatments, and make sure that the cup is clean.
Also, make sure that the car holder does not interfere
with the operation of other elements in the car.
1. Make sure the mount locking lever 3is released.
2. Place the suction cup 4in a good spot on the
dashboard. Press down firmly and evenly.
3. Snap the mount locking lever 3closed.

US-EN 14
Connecting the cable
1. Connect the holder
with the car charger 8
using the Micro USB to
USB type A cable 7.
2. Plug the car charger
8into a 12V/24V
car socket. The LED
indicator 2lights up
for 3 seconds and then goes off to show that the
product is receiving current.
NOTE: If you would like to use this Qi wireless
charging holder at home or office, please connect the
holder with a Quick Charge 3.0 compatible wall USB
charger (not included).
NOTE: The car holder should only be used when
the car engine is running, otherwise the car battery will
be discharged.
Charging your mobile device in the holder
1. Make sure the holder is in a vertical position and
facing you.
2. Put your mobile device in the holder making sure
that it is aligned with the Qi charging area 1of the
holder. The smartphone grab rails 6of the holder
will grip the mobile device using the weight of the
inserted mobile device. The mobile device will then
be firmly in place. Charging will begin on contact.
NOTE: This holder should not be used in a
horizontal position.
Protective covers that protect the mobile device may
interfere with the charging process. In this case, the
mobile device must be removed from the protective
cover.

US-EN 15
Removing the holder from the dashboard
Push the mount locking lever 3inwards, and lift from
the tab on the edge of the suction cup.
Note: Depending on the material of the dashboard,
the suction cup 4may leave a mark on the surface.
LED indicator 2status
The product has an LED along the bottom edge of the
charging area that indicates its operational status:
LED indicator Status
White LED on Charging / Full charge
White LED off Standby
White LED flashing Fault condition
PTroubleshooting
What should I do if the mobile device does
not get charging ?
 Check that the mobile device has Qi wireless
charging technology.
 Check that the mobile device is aligned over the
center of the Qi charging area 1.
 Check that no foreign object is blocking the
charging.
 Remove the protective cover of the mobile device if
necessary.
PStorage when not in use
Store the product in a dry environment, protected from
dust and direct sunlight.

US-EN 16
PCleaning
 Unplug the product and remove all plugs before
cleaning!
 No acid, chafing or solvent cleaning agents should
be used or the product can be damaged.
 Clean the outside of the product using a soft, dry
cloth!
 For tough soiling, a mild cleaning agent can be
used.
 Only use a clean, dry cloth for cleaning the product
and never use any corrosive liquids. Use a slightly
moistened cloth and a mild cleaning agent to
remove stubborn dirt.
PDisposal
Dispose of the packaging through your local recycling
facilities and in compliance with all federal, state and
local regulations.
b
a
Please note the package markings regarding
waste separation, indicated by abbreviations
(a) and numbers (b), meaning: 1–7:
plastics/20–22: paper and
cardboard/80–98: composite materials.
Contact your local waste management
authority for additional information on how to
dispose of the used product.
To help protect the environment, please dispose of the
product properly when it has reached the end of its
useful life, do not throw in the garbage. Information
on collection sites and their opening hours is available
from your local authority.

US-EN 17
PThree year limited warranty
What does this warranty cover?
The warranty covers:
• Damage, breakage or inoperability due to defect.
• Damage not caused by normal wear and tear
or failure to follow the safety and maintenance
instructions provided in the user manual.
What is not covered by the warranty?
The warranty does not cover damage caused by:
• Normal wear and tear of the product, including
fragile parts (such as switches, glass, etc.);
• Improper use or transport;
• Disregarding safety and maintenance instructions;
• Accidents or acts of nature (e.g. lightning, fire, water,
etc.);
• Tampering with the product (such as removing cover,
unscrewing
screws etc.)
Consequential and incidental damages are also not
covered under this warranty. However, some states do
not allow the exclusion or limitation of incidental or
consequential damages, so this limitation or exclusion
may not apply to you.
What is the period of coverage and
warranty resolution?
The warranty is for 3 years from the date of purchase.
At our discretion, product will either be refunded or
replaced.
What will we not do?
We will not:
• Start a new warranty period upon product
exchange;
• Repair product.

US-EN 18
How to process the warranty?
To initiate, please:
• Call customer service at 1 [phone]
• Visit the Website Customer Service Platform at www.
lidl.com/contact-us
or
• Visit a LIDL store for further assistance
To ensure the quickest warranty return process, please
have the following available:
• The original sales receipt that includes the date
purchased;
• The product and manual in the original package;
• A statement of the problem.
What must you do to keep the warranty in
effect?
• Retain the original receipt;
• Follow all product instructions;
• Do not repair or modify the product.
How does state law relate to this warranty?
This warranty gives you specific legal rights, and you
may also have other rights which vary from state to
state. All implied warranties are limited by the duration
and terms of this warranty. Some states do not allow
limitations on how long an implied warranty lasts, so
the above limitation may not apply to you.

US-ES 19
Descripción de las palabras de
advertencia............................................. Página 20
Servicio al cliente ................................. Página 20
Introducción............................................ Página 21
Uso previsto............................................. Página 21
Avisos de marcas comerciales ............... Página 21
Contenido................................................ Página 22
Instrucciones importantes
de seguridad.......................................... Página 22
Descripción de las partes.................. Página 27
Datos técnicos........................................ Página 29
Antes del uso.......................................... Página 30
Funcionamiento..................................... Página 30
Almacenamiento cuando no
está en uso .............................................. Page 32
Limpieza................................................... Página 32
Resolución de problemas.................. Página 33
Eliminación .............................................. Página 33
Garantía limitada de 3 años ........... Página 34

US-ES 20
DESCRIPCIÓN DE LAS
PALABRAS DE ADVERTENCIA
ADVERTENCIA indica una situación peligrosa, que
puede provocar la muerte o lesiones graves si no
se evita.
PRECAUCIÓN indica una situación peligrosa, que
puede provocar lesiones leves o moderadas si no
se evita.
AVISO indica información que se considera
importante, pero que no implica un peligro (p. ej.
mensajes relacionados con daños materiales).
SERVICIO AL CLIENTE
Visite una de nuestras tiendas LIDL en caso de
cualquier inquietud.
Por favor tenga su número IAN a la mano
Comuníquese con el servicio de atención al
cliente a 1 [phone]
Visite el portal de atención al cliente en
www.lidl.com/contact-us
IAN 326858_1901