Silvercrest SBTF 10 B2 User manual

IAN 78534
BLUETOOTH®HANDS-FREE KIT SBTF 10 B2
BLUETOOTH®-
FREISPRECH-
EINRICHTUNG
Bedienungsanleitung
BLUETOOTH®
HANDS-FREE KIT
Operating instructions
BLUETOOTH®-
HÅNDFRIT SÆT TIL
MOBILTELEFONEN
Betjeningsvejledning

GB / IE Operating instructions Page 1
DK Betjeningsvejledning Side 15
DE / AT / CH Bedienungsanleitung Seite 29
Before reading, unfold the page containing the illustrations and
familiarise yourself with all functions of the device.
Før du læser, vend siden med billeder frem og bliv bekendt med
alle apparatets funktioner.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und
machen Sie sich anschließend mit allen Funktionen des Gerätes
vertraut.

1
SBTF 10 B2
GB
IE
Content
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Correct Usage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Items supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operating Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing the hands-free appliance in a vehicle . . . . . . . 6
Switching the hands-free appliance on and off . . . . . . . 6
Coupling the hands-free
appliance with a mobile telephone. . . . . . . . . . . . . . . . . 7
Coupling the hands-free
appliance with several mobile telephones . . . . . . . . . . . 8
Separating the connection . . . . . . . . . . . . . . . . . . . . . . . 9
Re-establishing the connection . . . . . . . . . . . . . . . . . . . . 9
Using the hands-free appliance . . . . . . . . . . . . . . . . . . . 9
Charging 5 V Devices. . . . . . . . . . . . . . . . . . . . . . . . . . 11
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Warranty & Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Importer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Declaration of EU Conformity. . . . . . . . . . . . . . . . . . . . 14
IB_78534_SBTF10B2_LB3.indb 1IB_78534_SBTF10B2_LB3.indb 1 16.08.12 14:5816.08.12 14:58

GB
IE
2SBTF 10 B2
Congratulations on the purchase of your new appliance.
You have clearly decided in favour of a quality product.
These operating instructions are a part of this product.
They contain important information in regard to safety, use
and disposal. Before using the product, familiarise your-
self with all of these operating and safety instructions. Use
the product only as described and only for the specified
areas of application. In addition, pass these documents
on, together with the product, to any future owner.
Safety instructions
Symbol definitions:
This symbol points out the particular risks associated
with handling, operation or manipulation.
This symbol stands for special tips and operating
instructions.
T r a ffi c safety has priority!
●Comply with all local laws. When driving, your hands
must ALWAYS be free to operate the vehicle safely.
Traffic safety must ALWAYS take priority whilst driving.
●Only manipulate the hands-free appliance on those
occasions in which the traffic situation permits it and in
which you will not endanger, injure, obstruct or cause
annoyance to other road users.
●Do not permit your concentration on the road traffic to
be compromised by the manipulation and displays of
the handsfree appliance!
●Become familiar with the operation of it before driving
off
and practice the safe operation of the facility!
●Install the hands-free appliance in the vehicle such that
your view is not obstructed and that the appliance is
not located in an impact zone in the passenger com-
partment or in the inflation area of airbags.
IB_78534_SBTF10B2_LB3.indb 2IB_78534_SBTF10B2_LB3.indb 2 16.08.12 14:5816.08.12 14:58

3
SBTF 10 B2
GB
IE
General safety instructions
●Do not attempt to open or repair the appliance. Should
you do so, appliance safety can no longer be assured
and the warranty becomes void.
●Have the defective device repaired by customer ser-
vice or an authorised specialist only. No liability will
be accepted for damage caused by misuse, improper
handling, use of force or unauthorized modification.
●Never subject the appliance to moisture, extreme
temperatures or extreme vibrations.
●Do not allow children and people subject to supervision
play with the appliance, they could injure themselves
or cause damage to the appliance.
Connection to other mobile telephones
●If you wish to connect the appliance to another appli-
ance, read the operating instructions to obtain detailed
safety instructions. Do not connect it to a product that
is not compatible.
High frequency signals in vehicles
HF signals can, under circumstances, negatively influence the
function of not properly installed or not sufficiently shielded
electronic systems in vehicles, e.g. electronic ABS, electronic
tempo controllers and airbag systems. For further informa
tion about your vehicle or its possible ancillaries make
contact with the respective manufacturer or their repre-
sentative.
Correct Usage
The Bluetooth®Hands-Free Kit SBTF 10 B2 is designed
for use in vehicles with a voltage of 12-24 V. The hands-
free phone system uses both Bluetooth®radio technology
aswell as a digital signal processor (DSP) to carry out
telephone functions. In addition, mobile devices with an
operating voltage of 5V (MP3 players, cell phones,
etc.) can be charged via the USB port.
IB_78534_SBTF10B2_LB3.indb 3IB_78534_SBTF10B2_LB3.indb 3 16.08.12 14:5816.08.12 14:58

GB
IE
4SBTF 10 B2
This device may be used ONLY for private domestic pur-
poses, not for industrial or commercial applications. The
product at hand is, by default, NOT intended for use in
medicinal, lifesaving or life support applications. All of the
additional connecting cables and external devices used
MUST match the safety-related, electromagnetic compata-
bility and shielding quality standards of the device at hand.
This appliance is not intended for any other use or for uses
beyond those mentioned. Claims of any kind for damage
resulting from unintended use will not be excepted. The
operator alone bears liability.
Introduction
Bluetooth®is a wireless communication system with a
short range. It makes possible wireless connections be-
tween Bluetooth®appliances, such as for example mobile
telephones, PDA and PCs. Bluetooth®relates itself to a
worldwide standard for operation in the internationally
recognised ISM Frequency Range (Industrial, Scientific
and Medical). Within the ISM Frequency Range (2.402 -
2.480 GHz), a data transfer range of ca. 10 meters (class II)
is achieved. The disturbance susceptibility through other
users of the ISM Frequency Range, such as for example
microwaves, WLAN (802.116) or garage door openers,
is minimised by so-called “Frequency-Hopping“. With
Frequency-Hopping, a change of frequency levels takes
place at up to 1600 times per second, thereby Bluetooth®
is also reckoned to be relatively tap-proof.
Bluetooth® is a registered trademark of Bluetooth SIG, Inc.
The HSP (Headset-Profil) makes possible standard func-
tions such as voice transference, as well as the accept-
ance and rejection of calls.
The HFP (Handsfree-Profil) makes possible the hands-free
call functions of a mobile telephone, for example with the
help of voice commands.
IB_78534_SBTF10B2_LB3.indb 4IB_78534_SBTF10B2_LB3.indb 4 16.08.12 14:5816.08.12 14:58

5
SBTF 10 B2
GB
IE
Items supplied
Bluetooth®Hands-Free Kit
Operating instructions
Technical data
Operational voltage: 12-24 V / 1000 mA
Bluetooth®Specification: Version 3.0 + EDR,
up to a range of 10 meters
Supported Bluetooth®profiles: HSP and HFP
Output Voltage USB port: 5 V / 1 A
Fuse: F2AL / 250 V
Dimensions (L x W x H): 15,7 x 5,3 x 2,3 cm
Weight: 67 g
Operational temperature: +15° to +40°C
Humidity: 5 to 75%
(no condensation)
Operating Elements
1Vehicle connector plug
2Microphone
3+/- Buttons
4USB port
5Loudspeakers
6LED status indicator
7Multi-function button
IB_78534_SBTF10B2_LB3.indb 5IB_78534_SBTF10B2_LB3.indb 5 16.08.12 14:5816.08.12 14:58

GB
IE
6SBTF 10 B2
Installing the hands-free appliance
in a vehicle
So that the hands-free appliance can function correctly, it
is connected to the vehicle cigar lighter socket or on-board
power socket and provided with electricity from there.
●Ensure that the hands-free appliance engages completely
and that the operation of the vehicle is not negatively
influenced. The LED status indicator 6blinks twice every
3 seconds and a short high signal tone sounds once. The
appliance is in standby mode.
Note:
It is possible that the cigar lighter only functions when the
vehicle ignition is switched on. In cases of doubt, consult
the operating instructions for the particular vehicle.
Caution:
For vehicles in which the cigar lighter, resp. the vehicle cir-
cuit plug, also functions when the ignition is switched off:
●Use the hands-free appliance only when the motor is
running. Otherwise, the vehicle batteries could become
discharged over an extended period of time.
Note:
When you are not using the hands-free equipment remove
it from the vehicles cigarette lighter socket. Store it in a dry,
dust free location protected from direct sunlight.
Switching the hands-free
appliance on and off
Switching on: The appliance is switched off.
●Press and hold the multi-function button 7 for 3 seconds,
until a short and high signal tone is heard. The LED
status indicator 6blinks twice every 3 seconds.
Switching off: The appliance is in standby mode.
●Press and hold the multi-function button 7for 3 seconds,
until a long and deep signal tone is heard. The LED
status display 6extinguishes.
IB_78534_SBTF10B2_LB3.indb 6IB_78534_SBTF10B2_LB3.indb 6 16.08.12 14:5816.08.12 14:58

7
SBTF 10 B2
GB
IE
Coupling the hands-free appliance
with a mobile telephone
The hands-free appliance has been especially developed
for mobile telephones that support the Bluetooth®Profile
“Handsfree (HFP) and Headset (HSP)“. Further informa-
tion about Bluetooth®radio technology is to be found in
the operating instructions for your mobile telephone.
Before you can use the hands-free appliance, you must
connect it with a compatible mobile telephone (pairing).
●Check to make sure the mobile telephone is switched on.
●Programme the mobile telephone so that it searches
for Bluetooth®appliances. A detailed description of
how to do this is to be found in the operating instruc-
tions for your mobile telephone.
●Ensure that the hands-free appliance is correctly set up
and switched off
.
●To switch the device off, press and hold the multi-function
button 7for about 3 seconds. A long, low signal tone
will be heard and the LED status display 6extinguishes.
●Position the hands-free appliance and the mobile tele-
phone so that they are not more than 1 metre away
from each other.
●Press and hold down the multi-function button 7for 6
seconds until, after 3 seconds a short, high signal tone
and after a further 3 seconds a succession of low and
high signal tones are heard. The LED status display 6
lights up constantly and the hands-free equipment is
now in the coupling mode.
●Select the hands-free provision “Car Kit“ from the list of
available appliances for the mobile telephone.
●Enter in the pre-programmed passcode “9999“ and
then confi
rm it, which couples the appliances with each
other. You will hear a long high signal tone and the
LED status indicator 6blinks every 3 seconds.
●You can now use the hands-free appliance.
IB_78534_SBTF10B2_LB3.indb 7IB_78534_SBTF10B2_LB3.indb 7 16.08.12 14:5816.08.12 14:58

GB
IE
8SBTF 10 B2
Note:
When using the latest mobile phones, (Smartphones) those
that are equipped with Bluetooth 2.0 or a more modern
version, it is possible that the pass code “9999“ need not
be entered. If the coupling is not completed within 2 min-
utes, the hands-free appliance switches itself off. The LED
status display 6extinguishes and you will hear a long
and deep signal tone. With some mobile telephones it is
possible that coupling does not automatically take place.
In this case coupling must be carried out additionally on
the mobile telephone. The LED status display 6 blinks
twice every 3 seconds until this has been carried out. Fur-
ther information can be found in your mobile telephone’s
operating instructions.
Coupling the hands-free appliance
with several mobile telephones
You can couple the hands-free appliance with up to eight
mobile telephones. However, it can only be connected
with one mobiletelephone. If a further mobile telephone
is coupled with the hands-free appliance, the coupling in-
formation of the first coupled mobile telephone is erased.
When the hands-free appliance is switched on, within a
few seconds it attempts to make a connection to the last
used mobile phone. Should a connection not be possible,
the hands-free appliance nonetheless remains recognis-
able for other mobile telephones. To use the hands-free
appliance with a linked mobile phone that is not the last
used mobile phone, the connection must be made via the
Bluetooth®menu of the mobile phone.
IB_78534_SBTF10B2_LB3.indb 8IB_78534_SBTF10B2_LB3.indb 8 16.08.12 14:5816.08.12 14:58

9
SBTF 10 B2
GB
IE
Separating the connection
If you wish separate the mobile telephone from the hands-
free appliance, for example, to connect it to another
Bluetooth®appliance:
●Switch the hands-free appliance off
or
●separate the connection over the Bluetooth®menu in
the mobile telephone.
You need not erase the coupling with the hands-free appli-
ance in the Bluetooth®menu to separate the connection.
Re-establishing the connection
If you want to reconnect the hands-free appliance with the
last used mobile phone:
●Check to see that Bluetooth®is activated in the mobile
telephone, then switch the hands-free appliance on.
When connecting to a previously coupled mobile telephone
it is not necessary to enter a pass-code. You can set your
mobile telephone so that when the hands-free equipment is
switched on a connection with the mobile telephone is auto-
matically established. As soon as the hands-free equipment
is connected to the previously coupled mobile telephone a
short, high signal tone is emitted confirming the connection.
Further information regarding automatic coupling can be
found in your mobile telephone’s operating instructions.
Using the hands-free appliance
After successful coupling, the following functions are
available to you. Some of the described functions are
only possible with a mobile telephone that supports the
Handsfree Profile (HFP).
Call function
●Use your mobile telephone in the usual way to make a call.
●For redialing of the last number called, shortly press
the multi-function button 7twice.
●For activation of voice dialling, shortly press the multi-
function button 7once.
IB_78534_SBTF10B2_LB3.indb 9IB_78534_SBTF10B2_LB3.indb 9 16.08.12 14:5816.08.12 14:58

GB
IE
10 SBTF 10 B2
Note:
Voice dialing is only available with mobile telephones that
support this function. Further information regarding voice
dialing is to be found in the operating instructions for your
mobile telephone.
Accepting and ending a call
When you receive a call the LED status display 6blinks
and you hear a call tone from the hands-free appliance.
If the call signal in your mobile phone is switched off, the
ringing tone is nonetheless sounded via the hands-free
appliance.
●Press the multi-function button 7shortly once,
to accept the call.
●Press the multi-function button 7shortly once,
to terminate the accepted call.
You can also accept and terminate the call over the
mobile telephone.
Automatic call acceptance
If automatic call acceptance is activated in the mobile
telephone, it accepts the incoming call after a determined
time period and then passes it on to the hands-free
appliance. Further information regarding automatic call
acceptance is to be found in the operating instructions for
your mobile telephone.
Rejection of a call
●Press the multi-function button 7for 3 seconds to
reject an incoming telephone call.
Adjusting the volume of the hands-free appliance
You can adjust the sound volume level of the hands free
device with the +/- buttons 3.
●During a call, repeatedly press the + resp. - buttons 3
until the desired sound volume level is obtained. The
attainment of the maximum sound volume level is indi-
cated by a short signal tone.
IB_78534_SBTF10B2_LB3.indb 10IB_78534_SBTF10B2_LB3.indb 10 16.08.12 14:5816.08.12 14:58

11
SBTF 10 B2
GB
IE
Charging 5 V Devices
●Check the max. input voltage (5V) and the max. power
input (1000 mA) of the device which you want to charge.
For this, consult the operating manual of the device.
●Connect the device to be charged with the USB port 4
on the hands free device. The device now receives its
power supply from the hands free device. If the device
is equipped with a charging indicator light, this will in-
dicate that the device is being charged.
Troubleshooting
If you cannot connect the hands-free appliance with a
compatible mobile telephone, proceed as follows:
●Ensure that the Bluetooth®function in the mobile
telephone is activated.
●Ensure that the hands-free appliance is correctly
installed, switched on and supplied with electricity.
●If you use several Bluetooth®appliances, ensure that
a previously created Bluetooth®connection of the
mobile telephone is separated.
●Ensure that the hands-free appliance is distanced a ma-
ximum of 10 metres from the mobile telephone and that
there are no barriers or electronic devices between them.
If these measures do not correct the problem, please con-
tact the appropriate service partner for your country.
Cleaning and Care
Danger of electrocution!
●Before cleaning, always separate the electricity supply
from the appliance!
●NEVER submerse the appliance in water or other liquids!
●Do not permit liquids to permeate into the housing!
●Never open the housing of the appliance! There are
no user-serviceable elements inside.
IB_78534_SBTF10B2_LB3.indb 11IB_78534_SBTF10B2_LB3.indb 11 16.08.12 14:5816.08.12 14:58

GB
IE
12 SBTF 10 B2
●Do not use strong detergents, solvents or abrasive
cleaning agents to clean the appliance. These could
damage the housing surfaces.
●Clean the housing surfaces with a slightly moist soft cloth.
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved disposal
centre or at your community waste facility. Observe the
currently applicable regulations. In case of doubt, please
contact your waste disposal centre.
Dispose of all packaging materials in an
environmentally responsible manner.
Warranty & Service
The warranty for this appliance is for 3 years from the
date of purchase. The appliance has been manufactured
with care and meticulously examined before delivery.
Please retain your receipt as proof of purchase. In the
event of a warranty claim, please make contact by
telephone with our Service Department. Only in this way
can a post-free despatch for your goods be assured.
The warranty covers only claims for material and
manufacturing defects, but not for transport damage, for
wearing parts or for damage to fragile components, e.g.
buttons or batteries. This product is for private use only
and is not intended for commercial use.
The warranty is void in the case of abusive and improper
handling, use of force and internal tampering not carried
out by our authorized service branch. Your statutory rights
are not restricted in any way by this warranty.
IB_78534_SBTF10B2_LB3.indb 12IB_78534_SBTF10B2_LB3.indb 12 16.08.12 14:5816.08.12 14:58

13
SBTF 10 B2
GB
IE
The warranty period will not be extended by repairs
made under warranty. This applies also to replaced and
repaired parts. Any damage and defects extant on pur-
chase must be reported immediately after unpacking the
appliance, at the latest, two days after the purchase date.
Repairs made after the expiration of the warranty period
are subject to payment.
Service Great Britain
Tel.: [phone] (£ 0.10/Min.)
E-Mail: [email protected]
IAN 78534
Service Ireland
Tel.: [phone]
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: [email protected]
IAN 78534
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com
IB_78534_SBTF10B2_LB3.indb 13IB_78534_SBTF10B2_LB3.indb 13 16.08.12 14:5816.08.12 14:58

GB
IE
14 SBTF 10 B2
Declaration of EU Conformity
We, Kompernaß GmbH, Burgstraße 21, D-44867 Bochum,
hereby declare that the product SBTF 10 B2 Bluetooth®
hands-free Kit complies with the essential requirements and
other relevant provisions of the Motor Vehicle Directive
2004/104/EC, the R&TTE Directive 99/5/EC, the Low
Voltage Directive 2006/95/EC and the RoHS Directive
2011/65/EU.
Related harmonised standards:
EN 60950-1:2006 + A11:2009
ETSI EN 300 328 V1.7.1:2006
ETSI EN 301 489-1 V1.8.1:2008
ETSI EN 301 489-17 V2.1.1:2009
EN 50371:2002
ISO 7637-2:2004
Bochum, 10.08.2012
Semi Uguzlu
Quality Manager
IB_78534_SBTF10B2_LB3.indb 14IB_78534_SBTF10B2_LB3.indb 14 16.08.12 14:5816.08.12 14:58

15
SBTF 10 B2
DK
Indholdsfortegnelse
Sikkerhedsanvisninger. . . . . . . . . . . . . . . . . . . . . . . . . . 16
Bestemmelsesmæssig anvendelse . . . . . . . . . . . . . . . . . 17
Introduktion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Medfølger ved levering. . . . . . . . . . . . . . . . . . . . . . . . . 19
Tekniske data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Betjeningselementer . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Montering af håndfri-sættet i bilen . . . . . . . . . . . . . . . . 20
Tænd og sluk for håndfri-sættet. . . . . . . . . . . . . . . . . . . 20
Sammenkobling af håndfri-sæt med mobiltelefon. . . . . 21
Sammenkobling af håndfri-sæt
med flere mobiltelefoner . . . . . . . . . . . . . . . . . . . . . . . . 22
Afbrydelse af forbindelsen . . . . . . . . . . . . . . . . . . . . . . 23
Genetablering af forbindelsen . . . . . . . . . . . . . . . . . . . 23
Anvendelse af håndfri-sæt. . . . . . . . . . . . . . . . . . . . . . . 23
Opladning af 5 V-apparater. . . . . . . . . . . . . . . . . . . . . 25
Afhjælpning af fejl. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Rengøring og vedligeholdelse . . . . . . . . . . . . . . . . . . . 25
Bortskaffelse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Garanti & Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Importør . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
EU-overensstemmelseserklæring . . . . . . . . . . . . . . . . . . 28
IB_78534_SBTF10B2_LB3.indb 15IB_78534_SBTF10B2_LB3.indb 15 16.08.12 14:5816.08.12 14:58

DK
16 SBTF 10 B2
Til lykke med købet af din nye elartikel.
Dermed har du valgt et produkt af høj kvalitet. Betjenings-
vejledningen er del af dette produkt. Den indeholder vig-
tige informationer om sikkerhed, anvendelse og bortskaf-
felse. Du bedes sætte dig ind i alle produktets betjenings-
og sikkerhedsanvisninger før brug. Brug kun produktet
som beskrevet og kun til de angivne anvendelsesområder.
Lad også vejledningen følge med produktet, hvis du giver
det videre til andre.
Sikkerhedsanvisninger
Symbolforklaring:
Dette symbol henviser til særlige farer ved anvendelse,
funktion eller betjening.
Dette symbol står for specielle tips og betjeningsan-
visninger.
Sikkerheden i trafikken har første
prioritet!
●Følg de gældende love. Hænderne skal altid være fri til
betjening af bilen. Færdselssikkerheden skal altid have
første prioritet under kørslen.
●Brug kun håndfri-sættet i situationer, hvor færdslen tillader
det, så du ikke er til fare for andre trafikanter eller skader,
hindrereller generer dem.
●Lad ikke din opmærksomhed bortledes fra trafikken, fordi
du er beskæftiget med håndfri-sættet og dets displays!
●Lær betjeningen at kende, før du starter kørslen, og øv
dig i sikker anvendelse af håndfri-sættet!
●Installér håndfri-sættet i bilen, så dit udsyn ikke generes,
og så apparatet ikke er monteret et sted, hvor personer
kan kollidere med kabinen i tilfælde af en ulykke.
IB_78534_SBTF10B2_LB3.indb 16IB_78534_SBTF10B2_LB3.indb 16 16.08.12 14:5816.08.12 14:58

17
SBTF 10 B2
DK
Generelle sikkerhedsanvisninger
●Prøv ikke at åbne eller reparere apparatet. Hvis du gør
det, er apparatet ikke sikkert, og garantien bortfalder.
●Hvis apparatet er defekt, må det kun repareres af kun-
deservice eller af en autoriseret reparatør. Vi påtager
os intet ansvar for skader, som er opstået på grund af
misbrug eller forkert behandling, af anvendelse af vold
eller af uautoriserede ændringer.
●Udsæt aldrig apparatet for vand eller fugt, ekstreme
temperaturer eller voldsomme vibrationer.
●Lad ikke børn og personer, som behøver opsyn, lege
med apparatet, da de kan komme til skade eller
beskadige apparatet.
Tilslutning til andre mobiltelefoner
●Hvis du slutter apparatet til et andet apparat, bedes du
læse betjeningsvejledningen til dette for at få detalje-
rede sikkerhedsanvisninger. Slut ikke produkter til, som
ikke er kompatible.
Højfrekvenssignaler i biler
HF-signaler kan under visse omstændigheder reducere funk-
tionen for systemer, som ikke er installeret eller afskærmet
korrekt i biler, f.eks. elektronisk ABS, elektronisk hastigheds
regulering og airbagsystemer. Du bedes kontakte din bils
producent eller dennes repræsentant for yderligere infor-
mationer om bilen eller eventuelt tilbehør.
Bestemmelsesmæssig anvendelse
Bluetooth®-håndfrit sæt til mobiltelefonen SBTF 10 B2 er
beregnet til brug i biler med elektrisk anlæg på 12-24 V.
Håndfri-sættet anvender trådløs Bluetooth®-teknik samt en
digital signalprocessor (DSP) for at udføre opkaldsfunktio-
nerne. Der kan også oplades mobile apparater med en
driftsspænding på 5V (MP3-player, mobiltelefoner
osv.) via USB-tilslutningen.
IB_78534_SBTF10B2_LB3.indb 17IB_78534_SBTF10B2_LB3.indb 17 16.08.12 14:5816.08.12 14:58