Silvercrest SKV 1200 A1 User manual

IAN 281064 - C
ΠΡΟΣΑΡΜΟΓΕΑΣ ΚΡΕΑΤΟΜΗΧΑΝΗΣ
Οδηүίες χρήσης
FOR FOOD PROCESSOR
ΚΟΥΖΙΝΟΜΗΧΑΝΗ SKV 1200 A1
MEAT MINCING ATTACHMENT
Operating instructions

GB / IE / NI / CY Operating instructions Page 1
GR / CY Οδηүίες χρήσης Σελίδα 17
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τις δυο σελίδες με τις εικόνες και εξοικειωθείτε με όλες τις
λειτουργίες της συσκευής.

SKV 1200 A1 - C GB│IE│NI│CY │ 1 ■
Contents
Introduction ...........................................................2
Intended use...........................................................2
Package contents .......................................................2
Safety information......................................................3
Preparations...........................................................4
Component description "Meat grinder" .....................................5
Component description "Sausage stuffer attachment" .........................6
Component description "Kibbeh attachment" ................................7
Component description "Spritz cookie attachment" ...........................8
Assembly .............................................................9
Assembling the meat grinder ..........................................................9
Assembling the sausage stuffer attachment ...............................................9
Assembling the kibbeh attachment .....................................................9
Assembling the spritz cookie attachment.................................................9
Fitting onto the food processor .......................................................10
Processing food .......................................................11
Grinding meat ....................................................................11
Stuffing sausages..................................................................11
Forming kibbeh rolls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Making spritz cookies ..............................................................12
Dismantling...........................................................13
Cleaning and care .....................................................13
Storage..............................................................13
Disposal .............................................................13
Kompernass Handels GmbH warranty ....................................14
Service..........................................................................15
Importer .........................................................................15

SKV 1200 A1 - C
■ 2 │ GB│IE│NI│CY
Introduction
Congratulations on the purchase of your new
appliance.
You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
use and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The meat grinder attachment is intended exclusively
for processing foods in the usual household quanti-
ties in private households:
▯ grinding fresh meat,
▯ forming hollow rolls,
▯ making sausages in natural or artificial skin,
▯ making spritz cookies.
The meat grinder attachment is not intended for
processing frozen foods or other hard foods, e.g.
bones or nuts, and not in commercial or industrial
applications.
The meat grinder attachment may only be used in
conjunction with the SKV 1200 A1 food processor.
All parts of this appliance which come into
contact with food are food-safe.
Package contents
Pusher lid 
Filler bowl 
Housing with feed tube 
Transport screw with locking connection 
Pusher 
Locking ring 
Perforated disc, fine 
Perforated disc, coarse 
Mincing knives -
Spacer 3
Pattern strip holder !
Pattern strip .
Kibbeh funnel 0
Kibbeh disc 6
Sausage stuffer spout 1
Operating instructions
NOTE
► The components of the kibbeh and sausage
stuffer attachment may be in the pusher 
on delivery.
► Check contents for completeness and dam-
age immediately after unpacking. Contact
Customer Services if necessary.

SKV 1200 A1 - C GB│IE│NI│CY │ 3 ■
Safety information
DANGER
► Please pay close attention to the operating instructions and, in par-
ticular, the safety instructions for the SKV 1200 A1 food processor!
WARNING! RISK OF INJURY!
► Never put your hand into the openings on the appliance. Never insert
objects of any kind into the openings – except for the appropriate
pusher for the attachment and the foodstuffs to be processed. If you
do, there will be a serious risk of accidents!
► First, disconnect the plug from the mains power socket before fitting
or removing attachments.
► Do not leave the appliance unsupervised when it is ready for use.
To prevent the appliance from being switched on accidentally, always
unplug it after use or during breaks.
► Use only the original accessory parts for this appliance. Other acces-
sories may not meet the safety requirements.
► Do not operate the appliance empty. This could irreparably damage
the appliance.
► Before changing accessories or additional parts that are in motion
during operation, the appliance must be switched off and discon-
nected from mains power.
► Never use the appliance for purposes other than those described in
these instructions.
► Warning – the cross blade is very sharp! Always proceed with cau-
tion when handling and cleaning the appliance.
► The appliance should always be disconnected from the mains when
unattended and before assembly, disassembly or cleaning.
► This appliance may not be used by children.

SKV 1200 A1 - C
■ 4 │ GB│IE│NI│CY
WARNING! RISK OF INJURY!
► The appliance and its connecting cable must be kept away from
children.
► This appliance may be used by persons with limited physical, sensory
or mental capabilities or lack of experience and knowledge, provided
that they are under supervision or have been told how to use the ap-
pliance safely and are aware of the potential risks.
► Do not allow children to use the appliance as a plaything.
ATTENTION! PROPERTY DAMAGE!
► Do not operate the appliance without ingredients. Risk of overheating!
Preparations
1) Take all the parts out of the box and remove
the packaging material and any protective
wrapping or stickers.
CAUTION – PROPERTY DAMAGE!
► All of the metal components are coated with a
thin film of oil to protect them from corrosion.
Therefore, clean all parts carefully before
first use as described in detail in the section
“Cleaning and Care”. Rub all the metal parts
afterwards with a little cooking oil.

SKV 1200 A1 - C GB│IE│NI│CY │ 5 ■


-








Component description "Meat grinder"
Pusher lid
Filler bowl
Feed tube
Housing
Locking connection (for the drive unit for
special accessories on the food processor)
Transport screw
Pusher
Locking ring
Fine perforated disc
Coarse perforated disc
-Mincing knives

SKV 1200 A1 - C
■ 6 │ GB│IE│NI│CY
Component description "Sausage stuffer attachment"
Pusher lid
Filler bowl
Feed tube
Housing
Locking connection
(for the drive unit for special
accessories on the food processor)
Transport screw
Pusher
Locking ring
3Spacer
1Sausage stuffer spout




1




3

SKV 1200 A1 - C GB│IE│NI│CY │ 7 ■




6





0
Component description "Kibbeh attachment"
Pusher lid
Filler bowl
Feed tube
Housing
Locking connection (for the drive
unit for special accessories on
the food processor)
Transport screw
Pusher
Locking ring
0Kibbeh funnel
6Kibbeh disc

SKV 1200 A1 - C
■ 8 │ GB│IE│NI│CY




!





3
.
Component description "Spritz cookie attachment"
Pusher lid
Filler bowl
Feed tube
Housing
Locking connection (for the drive
unit for special accessories on
the food processor)
Transport screw
Pusher
Locking ring
3Spacer
!Pattern strip holder
.Pattern strip

SKV 1200 A1 - C GB│IE│NI│CY │ 9 ■
Assembly
Assembling the meat grinder
Refer to the section "Component description, meat
grinder".
1) Place the transport screw in the housing .
2) Then insert the mincing knife -so that the side
with the knives is facing away from the trans-
port screw . Ensure that the angled recess
of the mincing knife -lies correctly on the
angled axle.
3) Select the required perforated disc /.
4) Place the selected perforated disc /into the
housing so that the fixture on the housing 
grips into the recess on the edge of the perfo-
rated disc /.
5) If everything is correctly inserted, screw the
locking ring hand tight.
The attachment can now be connected to the food
processor (see section "Fitting onto the food processor").
Assembling the sausage stuffer
attachment
Refer to the section "Component description, sau-
sage stuffer attachment".
1) Place the transport screw in the housing .
2) Then fit the spacer 3. Ensure that the fixture
on the housing clicks into the recess on the
edge of the spacer 3.
3) Then fit the sausage stuffer spout 1in front of
the spacer 3.
4) Screw the locking ring hand-tight.
The attachment can now be connected to the food
processor (see section "Fitting onto the food processor").
Assembling the kibbeh attachment
Refer to the section "Component description, kib-
beh attachment".
1) Place the transport screw in the housing .
2) Insert the kibbeh disc 6. Ensure that the fixture
on the housing grips into the recess on the
edge of the kibbeh disc 6.
3) Then place the kibbeh funnel 0in front of the
kibbeh disc 6.
4) Screw the locking ring hand-tight.
The attachment can now be connected to the food
processor (see section "Fitting onto the food processor").
Assembling the spritz cookie attach-
ment
Refer to the section "Component description, spritz
cookie attachment".
1) Place the transport screw in the housing .
2) Then fit the spacer 3. Ensure that the fixture
on the housing clicks into the recess on the
edge of the spacer 3.
3) Now place the pattern strip holder !on the
spacer 3. Ensure that the recess on the edge
of the pattern strip holder !lies on the latch
of the spacer 3.
4) Screw the locking ring hand-tight.
5) Push the pattern strip .into the pattern strip
holder !until the desired pattern lies over the
opening in the pattern strip holder !.
The attachment can now be connected to the food
processor (see section "Fitting onto the food processor").

SKV 1200 A1 - C
■ 10 │ GB│IE│NI│CY
Fitting onto the food processor
WARNING! RISK OF INJURY!
► Ensure that the food processor is unplugged
when fitting the meat grinder attachment onto
the food processor.
1) Remove the cover from the drive unit for special
accessories (see section "Working with special
accessories" in the food processor operating
instructions).
2) Insert the locking connection into the drive
unit for special accessories so that the feed
tube points diagonally upwards (in the
example here, the housing is shown with
fitted meat grinder):
3) Turn the feed tube so that it points straight
upwards and the attachment is firmly attached:

SKV 1200 A1 - C GB│IE│NI│CY │ 11 ■
Processing food
NOTE
► Do not let the food processor run for longer
than 10 minutes at a time. Otherwise, the
appliance may overheat!
Grinding meat
Once the meat grinder attachment is correctly fitted
on the food processor:
1) Place a sufficiently large container under the
meat grinder attachment so that the processed
food can fall in.
2) Place the filler bowl on the feed tube .
3) If not already done: Close the pusher with
the pusher lid .
4) Prepare the meat to be processed by cutting
it into pieces of approx. 2 cm. Ensure that no
bones or sinews get into the meat grinder.
5) Insert the food processor plug into a mains
power socket.
6) Turn the food processor rotary switch to a low
setting (1–3).
7) Add the food to be processed into the feed
tube . Then use the pusher to push the
meat into the feed tube .
8) Once you have processed all the food, turn the
rotary switch of the food processor to position
0 and pull the power plug from of the mains
power socket.
Stuffing sausages
Once the sausage stuffer attachment is correctly
fitted on the food processor:
1) Place the filler bowl on the feed tube .
2) If not already done: Close the pusher with
the pusher lid .
3) Slip the sausage skin (natural or artificial) over
the sausage stuffer spout 1and tie the other
end closed. You will need around 1.60 m of
sausage skin for each 1 kg of sausage stuffing.
TIP
Soak natural skin in lukewarm water for about
3 hours and wring it out before use. This gives the
natural skin back its elasticity. You can purchase
natural sausage skin from butcher suppliers near
abattoirs or from your butcher.
4) Insert the food processor plug into a mains
power socket.
5) Turn the food processor rotary switch to a low
setting (1–3).
6) Add the sausage stuffing into the feed tube .
Then use the pusher to push the sausage
stuffing further into the feed tube .
7) The sausage stuffing is pressed into the sausage
skin through the sausage stuffer spout 1.
Once the sausage has reached the required
length, switch off the food processor, pinch
the end of the sausage and twist it a few times
around its longitudinal axis.
TIP
Sausage expands during cooking and freezing.
Therefore, do not overfill the sausages otherwise
they could burst.
8) Once you have processed all the food, turn the
rotary switch of the food processor to position
0 and pull the power plug from of the mains
power socket.

SKV 1200 A1 - C
■ 12 │ GB│IE│NI│CY
Forming kibbeh rolls
You can use the kibbeh attachment to make ground
food into hollow rolls of meat or vegetables, which
you can then stuff with a filling of your choice.
NOTE
► Feed the meat through the meat grinder twice
before pressing it through the kibbeh attach-
ment.
1) Place the filler bowl on the feed tube .
2) If not already done: Close the pusher with
the pusher lid .
3) Insert the food processor plug into a mains
power socket.
4) Turn the food processor rotary switch to a low
setting (1–3).
5) Feed the mixture that you are using to form the
kibbeh rolls into the feed tube . Then use the
pusher to push the mixture further into the
feed tube .
6) Once you have processed all the food, turn the
rotary switch of the food processor to position
0 and pull the power plug from of the mains
power socket.
Making spritz cookies
Once you have prepared a spritz cookie dough
according to your recipe and fitted the shortbread
attachment to the food processor:
1) Line a baking tray with baking paper and
place it under the opening at the front of the
attachment.
2) Place the filler bowl on the feed tube .
3) If not already done: Close the pusher with
the pusher lid .
4) Insert the food processor plug into a mains
power socket.
5) Turn the food processor rotary switch to a low
setting (1–3).
6) Press the dough evenly into the feed tube –
the transport screw then pushes it through
the selected pattern on the pattern strip ..
7) Once the biscuit has reached the required
length, stop the appliance and break off the
dough at the opening. Place the biscuit on the
baking tray.
8) Switch the appliance back on and repeat the
process with the remaining dough.
9) Once you have processed all the dough, turn
the food processor rotary switch into position 0
and pull the power plug from the mains power
socket.

SKV 1200 A1 - C GB│IE│NI│CY │ 13 ■
Dismantling
WARNING! RISK OF INJURY!
► Always disconnect the appliance from the
power supply before dismantling the attach-
ment.
1) Remove the filler bowl .
2) Push the small button next to the feed tube 
on the food processor and, at the same time,
turn the attachment to the side and pull it off
the food processor.
Cleaning and care
WARNING! RISK OF INJURY!
► Be careful when cleaning the mincing knife -!
It has sharp edges.
ATTENTION! PROPERTY DAMAGE!
► Do not use aggressive, abrasive or chemical
cleaning agents. These may damage the
surfaces.
► Do not clean the components of this attach-
ment in a dishwasher! This can cause dam-
age to the attachment components.
1) Clean all parts in warm water with a little mild
detergent.
2) Rinse all the parts off using clean water to
remove any remaining detergent residues.
3) Dry everything properly.
NOTE
► After cleaning, rub a little cooking oil into the
metal parts. Otherwise, the metal parts could
become discoloured.
Storage
Store all parts of the meat grinder attachment in a
clean, dry location.
You can also keep the perforated discs /in
the pusher for storage.
Disposal
Dispose of the attachment in an environmentally
friendly manner.
The packaging is made from environ-
mentally friendly material and can be
disposed of at your local recycling plant.

SKV 1200 A1 - C
■ 14 │ GB│IE│NI│CY
Kompernass Handels GmbH
warranty
Dear Customer,
This appliance has a 3-year warranty valid from
the date of purchase. If this product has any faults,
you, the buyer, have certain statutory rights. Your
statutory rights are not restricted in any way by the
warranty described below.
Warranty conditions
The validity period of the warranty starts from the
date of purchase. Please keep your original receipt
in a safe place. This document will be required as
proof of purchase.
If any material or production fault occurs within
three years of the date of purchase of the product,
we will either repair or replace the product for you
at our discretion. This warranty service is depend-
ent on you presenting the defective appliance and
the proof of purchase (receipt) and a short written
description of the fault and its time of occurrence.
If the defect is covered by the warranty, your product
will either be repaired or replaced by us. The repair
or replacement of a product does not signify the
beginning of a new warranty period.
Warranty period and statutory claims for
defects
The warranty period is not prolonged by repairs
effected under the warranty. This also applies to
replaced and repaired components. Any damage
and defects present at the time of purchase must
be reported immediately after unpacking. Repairs
carried out after expiry of the warranty period shall
be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance
with strict quality guidelines and inspected meticu-
lously prior to delivery.
The warranty covers material faults or production
faults. The warranty does not extend to product parts
subject to normal wear and tear or fragile parts such
as switches, batteries, baking moulds or parts made
of glass.
The warranty does not apply if the product has been
damaged, improperly used or improperly maintained.
The directions in the operating instructions for the
product regarding proper use of the product are
to be strictly followed. Uses and actions that are
discouraged in the operating instructions or which
are warned against must be avoided.
This product is intended solely for private use and
not for commercial purposes. The warranty shall be
deemed void in cases of misuse or improper handling,
use of force and modifications/repairs which have
not been carried out by one of our authorised
Service centres.

SKV 1200 A1 - C GB│IE│NI│CY │ 15 ■
Warranty claim procedure
To ensure quick processing of your case, please
observe the following instructions:
■ Please have the till receipt and the item number
(e.g. IAN 12345) available as proof of purchase.
■ You will find the item number on the type plate,
an engraving on the front page of the instructions
(bottom left), or as a sticker on the rear or bot-
tom of the appliance.
■ If functional or other defects occur, please
contact the service department listed either by
telephone or by e-mail.
■ You can return a defective product to us free of
charge to the service address that will be provided
to you. Ensure that you enclose the proof of pur-
chase (till receipt) and information about what
the defect is and when it occurred.
You can download these instructions
along with many other manuals,
product videos and software on
www.lidl-service.com.
Service
Service Great Britain
Tel.: [phone] (£ 0.10/Min.)
E-Mail: [email protected]
Service Ireland
Tel.: [phone]
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: [email protected]
CY Service Cyprus
Tel.: [phone]
E-Mail: [email protected]
IAN 281064 - C
Importer
Please note that the following address is not the
service address. Please use the service address
provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE - 44867 BOCHUM
GERMANY
www.kompernass.com

SKV 1200 A1 - C
■ 16 │ GB│IE│NI│CY

GR│CY │ 17 ■
SKV 1200 A1 - C
Περιεχόμενα
Εισαγωγή ............................................................18
Προβλεπόμενη χρήση ..................................................18
Παραδοτέος εξοπλισμός ................................................18
Υποδείξεις ασφαλείας. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Προετοιμασίες.........................................................20
Περιγραφή εξαρτημάτων για την «Κρεατομηχανή» ..........................21
Περιγραφή εξαρτημάτων για το «Εξάρτημα ώθησης για λουκάνικα» ............22
Περιγραφή εξαρτημάτων για το «Εξάρτημα για κέμπε». . . . . . . . . . . . . . . . . . . . . . . .23
Περιγραφή εξαρτημάτων για το «Εξάρτημα για κουλουράκια» .................24
Συναρμολόγηση ......................................................25
Συναρμολόγηση κρεατομηχανής .....................................................25
Συναρμολόγηση εξαρτήματος ώθησης για λουκάνικα.....................................25
Συναρμολόγηση εξαρτήματος για κέμπε ...............................................25
Συναρμολόγηση εξαρτήματος για κουλουράκια .........................................25
Συναρμολόγηση στην κουζινομηχανή .................................................26
Επεξεργασία τροφίμων .................................................27
Δημιουργία κιμά από κρέας .........................................................27
Ώθηση λουκάνικων ................................................................27
Δημιουργία ρολών κέμπε............................................................28
Παρασκευή κουλουριών ............................................................28
Αποσυναρμολόγηση ...................................................29
Καθαρισμός και φροντίδα...............................................29
Αποθήκευση ..........................................................29
Απόρριψη ............................................................29
Εγγύηση της Kompernass Handels GmbH..................................30
Σέρβις ..........................................................................31
Εισαγωγέας ......................................................................31