Silvercrest SWE 100 B1 Instruction sheet

English .............................................................................................................. 2
Polski...............................................................................................................28
Česky..............................................................................................................54
Slovensky........................................................................................................79
Deutsch........................................................................................................ 104

Multi-Band Tuner SWE 100 B1
2 - English
Table of Contents
Introduction ...................................................................................................... 3
Intended Use.................................................................................................... 3
Package Contents............................................................................................ 5
Technical Specifications .................................................................................. 6
Safety instructions ............................................................................................ 7
Danger Through Noise Disturbance .......................................................... 8
Copyright...................................................................................................... 8
Operating Environment ............................................................................... 8
Batteries........................................................................................................ 9
Children ......................................................................................................10
Overview........................................................................................................11
Display........................................................................................................13
Stand...........................................................................................................14
Before Getting Started ..................................................................................15
Inserting the Batteries.................................................................................15
Connecting a Plug-Type Power Adapter..................................................16
Getting Started...............................................................................................16
Powering the Device On/Off ...................................................................16
Setting the Time..........................................................................................17
Tuning a Station .........................................................................................18
Setting the Alarm Clock.............................................................................18
Enabling the Alarm ....................................................................................20
The Sleep Timer..........................................................................................21
Connecting the Headphones ....................................................................22
Backlight.....................................................................................................22

Multi-Band Tuner SWE 100 B1
English - 3
Setting the Sensitivity .................................................................................22
Selecting the Time Format.........................................................................23
Maintenance / Cleaning .............................................................................. 23
Environmental Considerations and Recycling .............................................24
Disposal of Batteries..................................................................................25
Conformity......................................................................................................25
Warranty Information....................................................................................26
Introduction
Thank you for choosing a SilverCrest product.
The multi-band tuner SilverCrest SWE 100 B1 is capable of tuning up to 6
different short-wave bands, the FM (VHF) band and the AM (medium
wave) band. Furthermore the device features a digital clock with alarm
clock function.
Please read the following pages for instructions on how to use your
product.
Intended Use
This device is a consumer electronics device. It has been designed to
receive and playback radio broadcasting stations. Furthermore, the device
may be used as an alarm clock. It may only be used for private use, not

Multi-Band Tuner SWE 100 B1
4 - English
industrial or commercial purposes. Furthermore, the device may not be
used in tropical climates. The manufacturer is not liable for any damage or
interference caused by unauthorized modifications. Only use the
accessories recommended by the manufacturer. If you are not using the
device within the Republic of Germany, you must observe the regulations
and laws in the country of use.
Please note that country-specific regulations may exist regarding the
frequency bands that can be received. Any information received from
frequency bands located outside those that are explicitly free for public
use may not be used, nor may its contents be forwarded to any third
parties.

Multi-Band Tuner SWE 100 B1
English - 5
Package Contents
Multi-band tuner SWE 100 B1
2 AA-sized batteries, 1.5 V
Pouch
Earphones SWE 100 B1

Multi-Band Tuner SWE 100 B1
6 - English
Technical Specifications
Operating voltage 3 V
Power adapter plug polarity
Max. current consumption 100 mA
Battery Type 2x AA 1.5 V (LR6)
Output power 100 mW
Frequency bands
Please note that the given tuning
bands may slightly vary upwards or
downwards because of product
tolerances.
FM 87,5 - 108 MHz
MW 520 - 1620 kHz
SW1 5,9 - 6,2 MHz
SW2 9,4 - 9,9 MHz
SW3 11,6 - 12,1 MHz
SW4 13,57 - 13,87 MHz
SW5 15,1 - 15,8 MHz
SW6 17,48 - 17,9 MHz
Dimensions 129 x 79 x 33 mm (W x H x D)
Weight 160 g (without batteries)
Headphones SWE 100 B1
Impedance 32 Ohms
Wide Band Characteristic
Voltage approx. 180 mV
Max. sound pressure level with
supplied headphones approx. 90 dB(A)
Max. output voltage on
headphones jack approx. 80 mV
Operating temperature 5 °C to 35 °C
Operating humidity 85 % rel. humidity

Multi-Band Tuner SWE 100 B1
English - 7
This information describes the technical characteristics o
f
y
our device. Different national regulations may apply in
different countries regarding the frequency bands tha
t
are free for public use. Please note that receiving any
information from bands outside these frequency bands
will be illegal and may be subject to law enforcement.
Safety instructions
Before you use this device for the first time, please read the following notes
in this manual and heed all warnings, even if you are familiar with
handling electronic devices. Keep this manual safe for future reference. If
you sell the device or pass it on, it is essential you hand over this manual
also.
This icon denotes important information for the safe
operation of the product and for the user’s safety.
This symbol denotes further information on the topic.

Multi-Band Tuner SWE 100 B1
8 - English
Danger Through Noise Disturbance
Caution when using headphones. Listening at high volume
can harm the user’s auditory system.
Copyright
The entire content of this User’s Manual is copyrighted and is provided to
the reader for information purposes only.
Copying data and information without prior written and explicit
authorization from the author is strictly forbidden. This also applies to any
commercial use of the contents and information.
All texts and figures are up-to-date as per the date of print release.
Operating Environment
The device is not for use in environments with high temperatures or
humidity (e.g. bathrooms), and must be kept free of dust. Operating
temperature and operating humidity: 5°C to 35°, max. 85 % RH.
Always make sure that:
there is free circulation of air (do not place the device on shelves, on a
carpet, on a bed, or anywhere that obstructs the ventilation slots, and
leave at least 10 cm clearance on all sides;
no direct heat sources (e.g. heating) can affect the device;

Multi-Band Tuner SWE 100 B1
English - 9
no direct sunlight or bright artificial light reaches the device;
contact with sprayed and dripping water and abrasive liquids must be
avoided and the device should never be operated near water. It must
especially never be immersed (do not place any recipients containing
liquids such as beverages, vases, etc. onto or next to the device);
the device is never placed in the immediate vicinity of magnetic fields
(e.g. loudspeakers);
no fire sources (e.g. burning candles) are placed on or near the
device;
no foreign bodies are introduced into the device;
the device is not subject to any great temperature changes as this may
cause moisture through condensation and short-circuit;
the device is not subject to excessive shocks and vibrations;
Batteries
Insert the batteries with the correct polarity. Refer to the polarity markings
beside the battery compartment. Do not try to recharge the batteries and
do not throw batteries into fire. Do not mix batteries (old and new or
carbon and alkaline, etc.). Remove batteries when the device is not to be
used for a long time. Non-intended use may cause explosion and danger
to life.

Multi-Band Tuner SWE 100 B1
10 - English
Children
Electrical appliances do not belong in the hands of children! Do not allow
children to use electrical devices when not under supervision. Children
may not comprehend the presence of potential risks. Small parts can
represent choking hazards. If a battery is swallowed, seek medical help
immediately. Keep the packaging away from children too as there is
danger of suffocation.

Multi-Band Tuner SWE 100 B1
English - 11
Overview

Multi-Band Tuner SWE 100 B1
12 - English
1 Telescopic antenna
2 Band selector
3 Alarm on/off
4 POWER LED
5 Sleep Timer
6 Repeat alarm / Snooze
7 Display
8 On/Off button
9 Battery level indicator
10 Backlight off
11 Backlight on
12 Select minutes
13 Select hours
14 Set alarm clock time
15 Set time
16 24-hours display
17 12-hours display
18 Speaker
19 DX/Local switch
20 Headphones connector jack
21 Connection for plug-type power adapter (optional, Polarity
)
22 Strap
23 Frequency dial knob
24 Volume control
25 Stand (on the back)
26 Battery compartment (on the back)

Multi-Band Tuner SWE 100 B1
English - 13
Display
27 Afternoon indicator (PM)
28 Sleep Timer
29 Frequency band
30 Alarm indicator
31 Clock/frequency display
32 Frequency unit

Multi-Band Tuner SWE 100 B1
14 - English
Stand
On the back panel of the device you’ll find a stand [25] that allows to
install the multi-band tuner in an almost vertical position. To do this, fold-out
the retractile stand [25].

Multi-Band Tuner SWE 100 B1
English - 15
Before Getting Started
You can power the device on either by using the supplied AA-sized
batteries or by using an optional plug-type power adapter (not supplied).
The power adapter must feature a compatible power plug and output a
voltage of 3V.
Do not use both means of power supply at the same
time. Remove batteries when the device is to be operate
d
using the power adapter.
Inserting the Batteries
Unplug the power adapter cable if there is one connected to the product.
Open the battery compartment cover [26] on the back panel of the device
by sliding it in the direction of the printed arrow and folding it out. Insert
the batteries with the correct polarity (+ and -). The correct polarity is
labelled on the batteries and beside the battery compartment. Close the
battery compartment cover and slide it in the opposite direction of the
arrow.
The device features a battery level indicator [9]. If it lights yellow, the
batteries are empty. When this happens, replace the batteries with new
batteries of the same type.

Multi-Band Tuner SWE 100 B1
16 - English
Remove batteries when the device is not to be used for a
long time.
Connecting a Plug-Type Power Adapter
Remove the batteries from the battery compartment [26] located on the
back panel of the device if any are inserted. Plug the power adapter plug
into the receptacle [21] of the multi-band tuner. Plug the power adapter
into an easily accessible wall outlet.
Getting Started
Powering the Device On/Off
To power the device on, press the On/Off button [8] once. When
powered on, the POWER LED [4] will light green and the device will
display the currently tuned-in frequency and the frequency band (FM,
MW, SW).
To power the device off, press the On/Off button [8] again. When
powered off, the current time will be shown on the display [7].

Multi-Band Tuner SWE 100 B1
English - 17
Setting the Time
The time can only be set while the device is powered off. If it is still
powered on, press the On/Off button [8] to power the device off.
Use the 12H button [17] and 24H button [16] to change
between the 12- and 24-hour time display.
Press and hold the TIME button [15].
Then press the HOUR button [13] repeatedly to set the hour. You can
also keep the HOUR button [13] pressed down to accelerate the digit
adjustment. To distinguish ante meridian (morning) and post meridian
(afternoon) time for the 12-hour display, "PM" [27] will display for post
meridian clock hours.
Keep the TIME button [15] pressed. Then press the MIN button [12]
repeatedly to set the minutes. You can also keep the MIN button [12]
pressed down to accelerate the digit adjustment.
Release the TIME button [15] after the clock has been set correctly.
Please note that you should adjust the clock when you
move into a different time zone.

Multi-Band Tuner SWE 100 B1
18 - English
Tuning a Station
You can only pivot the telescopic antenna and not retract
it into the device housing, otherwise you risk seriously
damaging your device.
Power the device on.
Use the volume adjustment button [24] to set the desired sound
volume.
First select the desired frequency band. To do this, use the band
selector [2]. The currently tuned frequency band will show on the
display [7].
Fully extract the telescopic antenna [1].
Rotate the frequency dial knob [23] to tune the desired frequency. The
frequency displays in MHz (for FM and SW) and in kHz (for MW). If
required, move the telescopic antenna into a different position or move
the device to optimise reception of the current station.
Setting the Alarm Clock
Make sure that the clock has been set correctly (see the page 17 - Setting
the Time). The alarm time can only be set while the device is powered off.
If it is still powered on, press the On/Off button [8] to power the device
off.