SilverStone MMS01 User manual

MMS01
Mammoth Series
Military-grade IP65 water resistant and dust proof
external 2.5” drive enclosure with USB 3.0
M
MS0
1
a
ter resistant and dust proo
f

Specifications
Mammoth Series
The MMS01 is a military-grade external 2.5” drive enclosure with USB 3.0 capability. Its thick, protective enclosure is certified for IP65 standard
so it is dust proof and water resistant. Under multiple testing regime based on US military standard, the MMS01 has also proven to be immune
or resistant to rapid temperature change, vibration, 1.2 meter drop, salt spray, sand, and fungal growth. Despite the extraordinary durability,
there are no sacrifices in performance as the MMS01 supports UASP in addition to its already speedy USB 3.0 interface. If you are looking for
an enclosure that can protect your drive in the harshest environment possible, the MMS01 is the one to get.
Model No
Enclosure material
Color
Military Standard
Ingress protection
HDD size support
HDD interface
Enclosure interface
Transfer speed
Support OS
Extra function
Environment
Net Weight
Dimension
SST-MMS01B
ABS with silicone sleeve
Black
MIL-STD-810G, Method 503.5 (thermal shock)
MIL-STD-810G, Method 507.5 (humidity)
MIL-STD-810G, Method 508.6 (fungus)
MIL-STD-810G, Method 509.5 (salt spray)
MIL-STD-810G, Method 510.5, Procedure I (sand and dust)
MIL-STD-810G, Method 514.6 (vibration)
MIL-STD-810G, Method 516.6 (shock)
IP6X
Dustproof: No ingress of dust; complete protection against contact (dust tight)
IPX5
Water resistant: Water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects
7mm or 9.5mm 2.5” SATA HDD/SSD
SATA III / II / I
Micro USB 3.0 type B (compatible with USB 2.0/USB 1.1)
Max. 5Gbps
Microsoft Windows 10/8.1/8/7/VISTA (32 and 64 bit) or future release versions
Mac OS 10.6 or future release versions
UASP
Operating Temperature: 5°C ~ 35°C
Operating Humidity: 20%RH ~ 80%RH
Storage Temperature: -20°C ~ 50°C
Storage Humidity: 20%RH ~ 80%RH
280g ± 20g
100mm (W) x 20mm (H) x 135 mm (D) (without silicone sleeve)
MMS01
Introduction
1
Product Overview
01
suppor
t
s
UASP
i
n a
dditi
on
t
o
it
s a
s
hest environment
pos
sible, the MM
S

Application for 2.5”SATA HDD/SSD( SATAIII 6Gbps /SATA II 3.0Gbps /SATA I 1.5Gbps)
■ This product is designed for SATA HDD/SSD only and is not applicable for PATA(IDE) based HDD.
■ This product can support hard drives with more than 4TB capacity.
■ Windows XP operating system limits HDD capacity to 2TB.
■ Loading / Removing hard drive may cause slight scratching.
The following USB Host controller models have been validated.
■ Intel H87 chipset USB 3.0 Host controller
■ ETron EJ168 USB 3.0 Host controller
■ Intel Z77 chipset USB 3.0 Host controller
■ ASMedia ASM1042 USB 3.0 Host controller
■ Frescologic FL1100 USB 3.0 Host controller
■ ASMedia ASM1142 USB 3.1 Host controller
■ FL1100 USB 3.0 Host controller
※Please update each host controller (adapter) driver to the latest version.
Package Content
Product Description
Appearance
User manual
MMS01B enclosure
Anti-vibration pad
Protective sleeve
Micro USB3.0 cableSix hand corner
Back
Latch
Screw
Protective sleeve
Micro USB 3.0
connector
2
EN
MMS01
Instruction
Mammoth Series

3
■When mounting a hard drive, please be mindful of static electricity as it can cause device malfunction. Please touch other metal objects to
discharge or wear antistatic gloves before handling hard drive.
■If hard drive already contains data, please backup it up before installation to prevent data loss.
1.Open the latch
2.Using included hex key to remove the hex screws for opening the MMS01 enclosure
3.Install HDD or SSD into MMS01 enclosure
Package Content
EN
Instruction
Installation Guide
Mammoth Series MMS01

6. Slip the protective sleeve over the enclosure
5. Reinstall all hex screws
4. Drive securely seated
4.1 Installation the crash pad
Anti-vibration pad
＊If 7mm thick 2.5” HDD/SSD is installed, please place the anti-vibration pad on it. For 9.5mm thick 2.5” HDD/SSD, it is not necessary to
use the anti-vibration pad.
EN
Instruction
MMS01
Mammoth Series
4

5
EN
Caution
7. Connect MMS01 to your computer
Mammoth Series MMS01
If a suspected case of failure occurs, please check for the following:
■My device is recognized as USB 2.0, not USB 3.0?
→Try to power off your computer and connect the cable again.
■Only 2TB capacity can be identified when using a drive over 2TB (Windows Vista/7/8/10)?
→Please use GPT format for over 2TB capacity.
■When connected as a USB 3.0 device, my system cannot recognize it after a period of time?
→Please update the USB 3.0 driver.
■Why some drives don’t show up in “My Computer” (Windows) ?
→Make sure the hard disk letter is assigned in C ~ Z range.
■When using a new drive, it cannot be recognized by my OS?
→Please format the drive.
■When using a 2TB drive, the capacity in the OS only shows 1.8TB?
→Most hard drive manufacturers use decimal, but the OS uses binary to calculate drive capacity.
Due to different calculation methods, you will see 200GB less capacity on a 2TB drive.
Package Content
Troubleshooting

EN
Caution
6
Q：Can I use drives that already have existing data?
A：Mostly yes, but depending on the environment in which the drive was previously used, there may be incompatibility,
so to avoid unpredictable data loss, please backup first before using it in MMS01B.
Q：What kinds of hard drives are supported？
A：The product can support 2.5” SATA HDD/SSD, but not IDE, SAS, SCSI HDD.
Q：How many drive insertion cycles can MMS01B withstand?
A：This product’s SATAconnector durability is rated up to 10,000 cycles.
Q：Why does disk format take so much time in Windows?
A：You can select quick format when performing the format function.
Q：Why can’t my drive access S.M.A.R.T information?
A：This product does not support S.M.A.R.T function.
Q：Does MMS01B support USAP function?
A：Yes, but your system also needs to support USAP for it to work.
FAQ
MMS01
Mammoth Series

DE
Einleitung
Mammoth Series MMS01
Unterstützt 2,5-Zoll-SATA-Festplatten/-SSDs (SATA III, 6 Gb/s /SATAII, 3,0 Gb/s /SATAI, 1,5 Gb/s)
■ Dieses Produkt wurde nur für SATA-Festplatten/-SSDs entwickelt und unterstützt keine PATA-
(IDE-)basierten Datenträger.
■ Dieses Produkt kann Datenträger mit mehr als 4 TB unterstützen.
■ Das Windows XP-Betriebssystem beschränkt die Laufwerkskapazität auf 2 TB.
■ Beim Installieren/Entfernen eines Datenträgers kann dieser leicht am Produkt kratzen.
Folgende USB-Host-Controller-Modelle wurden überprüft.
■ USB 3.0-Host-Controller mit Intel H87-Chipsatz
■ USB 3.0-Host-Controller ETron EJ168
■ USB 3.0-Host-Controller mit Intel Z77-Chipsatz
■ USB 3.0-Host-Controller ASMediaASM1042
■ USB 3.0-Host-Controller Frescologic FL1100
■ USB 3.1-Host-Controller ASMediaASM1142
■ USB 3.0-Host-Controller FL1100
*Bitte aktualisieren Sie den Treiber des jeweiligen Host-Controllers (Adapters) auf die neueste Version.
Zurück
Riegel
Sechskantschrauben
Protective sleeve
Micro USB 3.0-Kabel
Lieferumfang
Produktbeschreibung
Appearance
Bedienungsanleitung
MMS01B-Gehäuse
Vibrationsdämpfendes Polster
Protective sleeve
Micro USB 3.0-KabelSix hand corner
7

DE
Einleitung
Mammoth Series
■Bitte ergreifen Sie bei der Installation eines Datenträgers entsprechende Maßnahmen aufgrund statischer Elektrizität, da diese das Gerät
beschädigen kann. Berühren Sie zum Entladen andere metallische Objekte oder legen Sie ein Antistatik-Armband an, bevor Sie den
Datenträger installieren.
■Falls der Datenträger bereits Daten enthält, sichern Sie diese zur Vermeidung von Datenverlust bitte vor der Installation.
1. Riegel öffnen
2.Mit dem mitgelieferten Sechskantschlüssel Sechskantschrauben zum Öffnen des MMS01-Gehäuses entfernen
3. Festplatte oder SSD in MMS01-Gehäuse installieren
Package Content
Installationsanleitung
MMS01
8

9
DE
Einleitung
Mammoth Series MMS01
6. Schutzhülle über das Gehäuse schieben
5. Alle Sechskantschrauben wieder installieren
4.Laufwerk sicher installiert
4.1 Vibrationsdämpfendes Polster installieren
Vibrationsdämpfendes Polster
＊Falls eine 7 mm dicke 2,5-Zoll-Festplatte/-SSD installiert wird, platzieren Sie bitte das vibrationsdämpfende Polster darauf. Bei einer
9,5 mm dicken 2,5-Zoll-Festplatte/-SSD muss das vibrationsdämpfende Polster nicht verwendet werden.