SilverStone ts02b User manual

TS02B

EXTERNAL 2.5’’ HDD ENCLOSURE
Specifications:
Model No.
Enclosure Material
Color
Power Requirement
Drive Size Support
Drive Interface Support
Hard Disk Support
Net Weight
Dimension
SST-TS02B
Aluminum.
Black.
5Vdc.
2.5” hard drive.
SATA hard drive.
Support up to 1TB Hard Disk and beyond *
eSATA (Max. 3Gbits)
USB2.0 (Max. 480Mbits)
Enclosure Interface
Operating System Support
Minimum System
Requirements
Windows 2000, XP, Vista, Mac OS and Linux.
Windows 2000/XP, and Windows Vista
Mac OS 9.x (Apple USB support 1.3.5 and
greater) and Mac OS 10.1, 10.2, 10.3, and 10.4
125 g
128mm(D) x 82mm(W) x17mm(H)
*TS02 can theoretically support any hard drive capacity recognized by your PC, however, drive beyond
1 TB were unavailable for testing at the time of product release
MacȈG3 processor or greater Computer
with eSATA or USB 2.0/1.1 interface.
PCȈIntel Pentium 233MHz-compatible
processor or greater Minimum 32MB RAM.
1

EXTERNAL 2.5’’ HDD ENCLOSURE
2
ㅔԧЁ᭛
ㅔԧЁ᭛
Remove the two screws from the I/O panels.
Quite los dos tornillos de los paneles de E/S
Entfernen Sie die beiden Schrauben der I/O Blende
Retirez les 2 vis du panneau d’entrée/sortie
Rimuovere le due viti dal pannello I/O
Выньте два шурупа на панели ввода/вывода.
I/O 䑜≄㜄㉐ ▄ᵐ㢌 ⇌㇠⪰ 㥐ᶤ䚝⏼␘.
I/Oࡄࡀ࡞߆ࠄࡀࠫ2ᧄࠍᄖߒ߹ߔ
ϟI/O䴶ᵓϞⱘܽ业㶎㍆
ϟI/O䴶ᵓϞⱘϸ乫㶎ϱ
1.

EXTERNAL 2.5’’ HDD ENCLOSURE
3
Attach the included mylar film as shown.
2.
ㅔԧЁ᭛
ㅔԧЁ᭛
Instale los paneles de mylar película que se
incluyen como se muestra
Bringen Sie den beigefügten Schaumstoff wie
gezeigt an
Collez l’ mylar film inclus comme montré
Applicare le mylar film in dotazione come
mostrato
Прикрепите прилагаемые майларовая
фильм, как показано на рисунке.
Ἤ⫰㜄㉐㝴 ᵍ㢨 ┍⸽═ MYLAR 䙸⪸㡸
⺴㵝䚝⏼␘.
࿑ߩࠃ߁ߦઃዻߩࡑࠗ࡜࡯ࡈࠖ࡞ࡓࠍ
ขࠅઃߌ߹ߔ
ձ೪⼎ᇛ㌩㎷⠛䊐Ϟ
ձ೒⼎ᇚ㒱㓬⠛䌈Ϟ

EXTERNAL 2.5’’ HDD ENCLOSURE
4
Connect your 2.5” hard drive carefully to the
SATA connector on the PCB.
3.
ㅔԧЁ᭛
ㅔԧЁ᭛
Conecte con cuidado su disco duro de 2,5” al
conector SATA del PCB
Verbinden Sie die 2,5'' Festplatte vorsichtig
mit dem SATA Anschluss an der Platine
Branchez votre disque dur 2.5” délicatement
au connecteur SATA situé sur le PCB
Connettere con la dovuta cautela l’hard disk
da 2,5” al connettore posto sul PCB
Осторожно подключите ваш 2,5-дюймовый
жесткий диск к SATA-разъему печатной платы.
PCB㜄㢼⏈ SATA 䀘≙䉤⪰ 2.5”
䚌☐☐⢰㢨⽀⪰ 㦤㐠㏘⤱󰵡 㜤󰶅䚝⏼␘.
2.5”ࡂ࡯࠼࠺ࠖࠬࠢ࠼࡜ࠗࡉࠍPCBߩSATA
ࠦࡀࠢ࠲ߦ⏕ታߦធ⛯ߒ߹ߔޕ
ᇛᙼⱘ2.5”⹀⹳ᇣᖗഄᦦܹ3&%ᵓϞⱘ6$7$᥹丁
ᇚᙼⱘ2.5”⹀Ⲭᇣᖗഄᦦܹ3&%ᵓϞⱘ6$7$᥹༈

EXTERNAL 2.5’’ HDD ENCLOSURE
5
ㅔԧЁ᭛
ㅔԧЁ᭛
Insert the hare drive and PCB into TS02 aluminum case.
Please make sure the PCB slide into the
guiding groove.
Inserte el disco duro y PCB en la caja de aluminio del TS02.
Compruebe que el PCB se desliza en su lugar.
Setzen Sie die 2,5'' Festplatte und die Platine in das
TS02 Aluminium Gehäuse ein.
Bitte stellen Sie sicher, dass sich die Platine in die
Führungsnut einschiebt.
Insérez le disque dur et le PCB dans le boîtier en
aluminium du TS02.
Veuillez bien vérifier que le PCB glisse correctement
dans le rail du boîtier.
Inserire l’hard disk ed il PCB nel box in alluminio TS02.
Assicurarsi che il PCB scivoli nella specifica guida.
Вставьте жесткий диск и печатную плату в
алюминиевый корпус TS02.
Убедитесь, что печатная плата попала в
направляющие пазы.
T02 㚀⨜⴬⎸ 䀴㢨㏘㜄 䚌☐ ☐⢰㢨⽀㝴 PCB⪰ㇱ㢹䚝⏼␘.
ᴴ㢨☐ 䝼㜄 PCBᴴ⴬ⅸ⤠㫼 ㍌㢼⓸⦑ 䞉㢬䚝⏼␘.
ࡂ࡯࠼࠺ࠖࠬࠢ࠼࡜ࠗࡉߣPCBࠍTS02
ࠕ࡞ࡒ࠾࠙ࡓࠤ࡯ࠬߦ౉ࠇ߹ߔޕ
PCBߪࠟࠗ࠼Ḵߦࠬ࡜ࠗ࠼ᑼߦ౉ࠇߡߊߛߐ޿ޕ
ᇛ⹀⹳㟛3&%ᵓᦦܹ76໪᥹ⲦЁ
䂟⺎䁡3&%ᵓℷ⺎ഄᦦܹᇢ䒠Ё
ᇚ⹀ⲬϢ3&%ᵓᦦܹ76໪᥹ⲦЁ
䇋⹂䅸3&%ᵓℷ⹂ഄᦦܹᇐ䔼Ё
4.

EXTERNAL 2.5’’ HDD ENCLOSURE
6
ㅔԧЁ᭛
ㅔԧЁ᭛
Reinstall the I/O panel and secure with screws
(step1).
Reinstale el panel de E/S y fíjelo con tornillos
(paso 1)
Setzen Sie die I/O Blende wieder ein und
befestigen Sie diese mit den beiden Schrauben
(siehe Schritt 1)
Remettez le panneau d’entrée/sortie et fixez-le
avec les vis retirées lors de l’étape 1
Reinstallare il pannello I/O e serrarlo con le viti
Установите на место панель ввода/вывода и
закрепите шурупами (этап 1).
I/O 䑜≄㡸 㣠㉘㾌䚌Ḕ ⇌㇠
( STEP1)⦐Ḕ㥉䚝⏼␘.
I/Oࡄࡀ࡞ࠍᚯߒޔࡀࠫߢ࿕ቯߒ߹ߔ
ࠬ࠹࠶ࡊ
ᇛI/O䴶ᵓ㺱ಲϺҹ㶎㍆䥪೎ℹ倳ϔ
ᇚI/O䴶ᵓ㺙ಲᑊҹ㶎ϱ䫕೎ℹ偸ϔ
5.

G11209730