simplehuman KT1078 User manual

set up
guide

1
3
2
quick start
• remove battery cover
at base of pump with
screwdriver
• insert 4 AA batteries
as shown
• twist off the lid on top
of the chamber to fill
Note: Do not use soap
with exfoliants.
• turn dial at base of pump
to setting 4
• press and hold the top
button behind the reservoir
lid until soap comes out
insert batteries
prime the pump
fill the reservoir
troubleshooting tip
If soap isn’t coming out, air pressure may be
blocking the valve. Try giving the little tab under
the nozzle a gentle tug to allow air through.
Be careful: Don’t pull out the tab!
adjust the volume
To change the amount dispensed,
turn the dial at the base of the
pump to the desired setting.
activate 20-second wash timer
Turn dial to OFF position. Press and hold top button, then turn dial to
any setting.
The blue light will flash continuously when it’s
time to replace the batteries.
low battery alert
setting
1thin soap
3thick soap, lotion, or sanitizer
2standard soap or sanitizer
4large amount of soap, lotion or sanitizer
recommended use
OFF

Questions? Our customer
service team is more than
happy to help.
or find answers online at
www.simplehuman.com/service
1-888-988-8880
Mon-Fri 8am-5pm Pacific time
use & care
• Your sensor soap pump dispenses
soap, hand sanitizer, or lotion.
Please keep it simple: avoid using
soaps with exfoliants or moisture
beads, foaming soaps, or soap that
has been diluted with water.
• To clean, wipe the pump with a damp
cloth—do not submerge it in water
or use it in the shower.

a can
for any
space
We make our step cans in
many sizes and styles. Find
the one to match your space
at www.simplehuman.com
semi-round step can slim plastic step can
butterfly step can slim step can
round step can
see the entire collection at www.simplehuman.com rectangular recycler

tools for efficient living®
www. .com
120-0071-02