simplehuman ST1004 User manual

set up
guide

quick start
• use a screwdriver to
remove battery cover
• insert 4 AA batteries
as shown
• unscrew top to fill
chamber
Note: Do not use
soap with exfoliants.
• place your hand under
the sensor
• hold down button
until soap comes out
insert batteries prime the pump
fill the reservoir
1
2
3
Note: Only use alkaline batteries.
+
If the soap isn’t flowing, use a
pin or paperclip to lightly poke
the valve opening.
Be careful not to push too far
or puncture the surrounding
rubber area.
tip: priming problem?
adjust the volume
on/off
continuous dispensing
low battery alert
To change the amount dispensed,
press or buttons on the bottom
of the pump.
Press and hold button to
dispense soap continuously.
LED will turn red during operation
to indicate low battery.
+-
Press and hold button to turn the
pump off; press button to turn on.
+
+
-
+
-
bottom view

use & care
• Your sensor pump dispenses
soap, hand sanitizer, or lotion.
Please keep it simple: avoid
soaps with exfoliants or beads.
• To clean, wipe pump with a damp
cloth—do not submerge in water
or use in the shower.
Questions?
Find answers easily online:
www.simplehuman.com/service

a can
for any
space
We make our step cans in
many sizes and styles. Find
the one to match your space
at www.simplehuman.com
semi-round step can plastic slim step can
butterfly step can slim step can
round step can
see the entire collection at www.simplehuman.com rectangular recycler

<tools for efficient living®
www. .com
120-0294-01