SimPure Membrane Solutions MSA3S User manual

Who we are
•Membrane Solutions®is a purification brand from the United States,
focusing on engineering filtration and advanced purification
technology.
•Membrane Solutions®promotes the philosophy of a minimalist
lifestyle, returning to nature with clean water and fresh air.
•Membrane Solutions® design product's to be both smart, easy to
operate, and practical in appearance and functionality.
Contact Us
If you require technical assistance, please contact our friendly
professional support engineers, who will be pleased to assist you.
4530 B STREET NW #A, AUBURN WA 98001, USA
Toll-Free Phone: [phone]
Customer Service: [e-mail]
Website: www.mspurelife.com
MSA3S Air Purifier
Please retain owner's manual for future reference

Overview
Getting Started
•Introduction
•System features
•Membrane Solutions®contact details
•Warnings & Cautions
•Operating Guidelines
Installation Guide
•System Contents
•Start-up
•Turning on the Purifier
Operation Guide
•Operation Guide
•Mode Selection
•Filter Replacement
•Troubleshooting Guide
•Warranty
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, this
equipment should be installed and operated with minimum distance
between 20cm the radiator your body: Use only the supplied antenna.
1
14

Warranty
Membrane Solutions®warrants to the customer that its residential air
purifiers will be free from defects in material and workmanship under
normal use and service for a period of 1 year. We will replace or repair
any part of the Membrane Solutions®air purifier that we find to be
defective in operation due to faulty materials or workmanship within one
year since the date of the original purchase. Used replaceable filter
cartridges are excluded.
General Conditions
Membrane Solutions®obligation to the customer under these warranties
shall be limited, at its option, to replacement or repair of items covered by
these warranties. Prior to return or repair of covered items, the customer
must obtain a return goods authorization number from Membrane
Solutions®and, at Membrane Solutions®option, return the item with
freight prepaid by the customer.
Damage to any part of this system because of misuse, misapplication,
negligence, alteration, accident, installation, or operation contrary to our
instructions, this warranty does not cover incompatibility with
accessories not installed by Membrane Solutions®, or damage caused by
freezing, flood, fire, or Acts of God. In all such cases, regular charges will
apply. This limited warranty does not include service to diagnose a
claimed malfunction in this unit. This warranty is void if the claimer is not
the original purchaser of the unit or if the unit is not operated under
normal operating conditions. We assume no warranty liability in
connection with this system other than that specified herein. This
warranty is in lieu of all other warranties, expressed or implied, including
warranties of fitness for a particular purpose. Membrane Solutions®
liability hereunder shall not exceed the cost of the product. Under no
circumstances will Membrane Solutions®be liable for any incidental or
consequential damages or for any other loss, damage or expense of any
kind, including loss of use, arising in connection with the installation or
use or inability to use the covered items. These warranties are governed
by the laws of the state of Washington, USA, and may change at any time
without notice.
Getting Started
Introduction
Thank you for purchasing the Membrane Solutions®MSA3S Air Purifier.
Please contact us for the latest product information, including operator
manuals, videos, support materials, and where to purchase items.
The MSA3S is a durable piece of equipment;
it will last for many years with proper care.
This owner's handbook outlines the
installation, operation, and maintenance
requirements to sustain perfect product
performance.
The MSA3S features triple filtration: Primary
filter, High-Efficiency Particulate Air Filter
(HEPA), and Activated Carbon. This triple-
action filtration will be capturing particles
with a diameter greater than or equal to 0.3
microns while removing odors and freshen
the surrounding air.
Website: www.mspurelife.com
Customer Service: [email protected]
Toll-Free Phone: [phone]
The MSA3S can filter out impurities and particles in the air, such as, dust,
pollen, cigarette smoke, pet dander, off-odors, and unhealthy vapors.
13
2

Warning & Caution
Membrane Solutions®products are designed with safety in mind.
However, personnel using this device must be familiar with any potential
dangers. All safety information detailed in this handbook should be
reviewed before installing and operating this air purifier.
·This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit
in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
·This product is not a toy; children must be supervised when using the
device. Keep packing materials out of children's reach.
·The system has been designed for indoor use only. Install the air
purifier out of direct sunlight on a flat, level, dry, and secure surface
with average ambient room temperature.
·Do not touch the power plug with wet hands. Do not use if plug or
power cord is damaged or the product is not working.
·Do not use the device in a place with heavy moisture or smoke. Please
keep the device away from flammable gas appliances such as heaters
of fireplaces.
·Clean the device and remove any dust from the power plug regularly.
Unplug the unit when cleaning, do not use strong corrosive
detergents of chemicals as they may damage the device's surface.
·Do not obstruct the air inlets or outlets on the device. Do Not wash or
reuse the composite filters –Replace with new filters.
Warnings and Cautions are provided; Failing to observe these
instructions could damage the equipment, associated parts,
surroundings, or personal injury.
Troubleshooting Guide
Problem
Possible Solution
5
Unpleasant or musty
smell coming from the
purifier
Do not use in a damp or wet
environment. If the filter becomes
damp, replace the filter and move the
air purifier to a dry area.
The carbon part of the filter may be
exhausted; replace the filter.
6
The filter indicator
light is flash.
The air filter is 100% exhausted and
requires replacement. (see page 9)
7
Only the sleep
indicator light is on,
yet the purifier is still
operating.
The air purifier is in sleep mode, push
the fan speed button to change the
operating mode, the indicates lights
will turn on again.
8
If your problem is not
listed
Please contact Membrane Solutions®
Customer Service.
9
Air Quality Indicator
always stays green,
even when the air
quality is poor.
The air quality sensor detects
airborne particles, but it cannot detect
gas or odor.
3
12

Troubleshooting Guide
Problem
Possible Solution
1
The air purifier
will not turn on or
respond to the
power button
Confirm that unit is plugged into a
powered outlet.
Make sure the panel is installed and
locked on the air purifier. (see page 10)
2
Airflow is
significantly
reduced
Make sure the filter is removed from its
packaging. (see page 9)
Press the Fan Speed button to increase
fan speed.
The filter may be blocked, replace the air
filter.
3
Air Purifier makes
unusual noise
while the fan is on
Make sure the air purifier is being
operated on a firm level surface.
The filter may be blocked, replace the air
filter.
The air purifier may be damaged. Contact
Membrane Solutions®customer support.
4
Poor air
purification quality
Press the Fan Speed button to increase
fan speed.
Close doors and windows while using the
air purifier.
Make sure the air filter is removed from
its packaging. (see page 9)
Replace the filter.
5
Operating Guidelines
The following table lists the operating parameters for this product. Operating
this product outside these specifications may cause system performance issues
and may even lead to personal injury and void any warranty. Please contact
Membrane Solutions®for further advice and support.
Operating Parameters
Model
Membrane Solutions® MSA3S
Rated Voltage
120 V~60 Hz
Rated Power
44 Watts
Dimensions
7.7 inches x 13.1 inches x 21.5 inches
(195 mm x 334 mm x 545 mm)
Operating weight
13.7 lb (6.2 kg)
Filter Element type
A single composite filter element
Temperature & Humidity
Operating: 32-104 ℉ (0-40 ℃) 20-90%
Storage: 14-140 ℉ (-10-60 ℃) 20-90%
11
4

Installation guide
System Contents
Your Membrane Solutions®MSA3S Air Purifier was carefully assembled,
packaged, and shipped complete with all the parts you should require.
Unsure about something? Is there a problem?
Please contact Membrane Solutions® via our service email
or toll-free number.
Website: www.mspurelife.com
Customer Service: [e-mail]
Toll-Free Phone: [phone]
Step 3
Remove any packing from the new filter
element and notice the inward and outward
sides of the filter element.
Refer to the new filter instructions for
airflow direction, making sure the two
handles at the top and bottom face outwards.
Step 4
Reinstall the panel and lock it into place by
pressing both sides of the panel's top edge.
After replacing the filter, plug the power
cord back into an electrical outlet. Hold
down the reset button for 3 seconds to reset
the filter timer. The indicator light will flash
three times and then go out, showing the
reset was successful. (See Page 8)
Please contact our customer service for purchase options:
Website: www.mspurelife.com
Customer Service: [e-mail]
Toll-Free Phone: [phone]
5
10
The actual lifespan of the filter may vary depending on the amount
of dust, smoke, humidity, and the concentration of other airborne
particles and vapors in the air.

Air quality
Color of the light
Air quality
Fan speed at auto mode
Green
great
Low speed
Yellow
General
Medium speed
Red
poor
High Speed
Note: The air purifier will take 30 seconds to detect the air quality each
time it is turned on. During this time the air quality light will be flashing
yellow. The air quality sensor detects airborne particles, but it cannot
detect gas.
Filter time
Filter life 100% remaining.
Filter life 75% remaining.
Filter life 50% remaining.
Filter life 25% remaining. Order a new filter; when
light flash, replace the filter.
Filter Replacement
Step 1
Press the power button to turn the air purifier
off and unplug the electrical outlet's power
cord.
Remove the panel of the air purifier.
Step 2
Pull out the composite filter element using the
handle at the bottom of the filter.
Clean out any remaining dust, dirt, or lint inside
the purifier using a vacuum hose or dry cloth.
DO NOT use water or liquids to clean the
purifier.
Commissioning the system
Step 1
Before using the air purifier for the first time,
open the panel and remove the composite filter.
Make sure to remove any packaging from the
filter element, or the product will not function
correctly.
Step 2
Make sure the panel is installed and locked on the
air purifier (see page 10).
Plug the air purifier power plug into an electrical
outlet; the unit will make a single beep.
The purifier should now be in standby mode.
Step 3
Push the power button once to turn the air
purifier on.
The purifier should now be in operating mode.
Warning:
For your safety, the air purifier is equipped with a safety switch. If you
open the panel when the purifier is running, the fan will stop running
and sound two beeps. The panel must be in place for the purifier to
operate.
9
6

Operating Guide
Control Panel
Power Button
Pressing the Power button will put the air
purifier into operating mode.
Press the power button a second time to stop
the air purifier and place it into standby mode.
Fan Speed
Press the fan speed button repeatedly to cycle
through the different speed settings.
1 –Low speed
2 –Medium speed
3 –High Speed
The corresponding fan speed indicator light will
display the current fan speed.
Lock
To lock the system, press and hold the lock
button for 3 seconds until the lock display is
illuminated.
To unlock the system, press and hold the lock
button until the lock indicator light turns off.
Sleeping Mode
Press the sleep button to put the unit into Sleep
Mode. In this mode, the fan is at its
lowest/quietest setting; all the indicators will
be off after 3 seconds to avoid disturbing your
sleep.
Timer
WIFI
Auto Mode
Filter Reset
7
8
Press the timer button to set the timed auto-off
feature. The unit can be set run between 1 and 8
hours. Continue to press the timer button to cycle
through the preselected times. The corresponding
duration will be represented by the number of
indicator lights illuminated.
Indicate configuration status of the WIFI.
In light-off mode, when pressing the other
button, the indicator lights corresponding to the
functions will be on, and go off after 3 seconds.
See the MSPure APP instructions for more
information.
Press the Auto button to set the unit at Auto
Mode. The Auto indicators light will be
illuminated. The fan speed will change based on
air quality. (See page. 9)
When the total run hours of the air purifier reach
1700 hours, the indicator will flash to indicate
the filter needs to be replaced. (See page. 9). After
the replacement is completed, press and hold the
filter button for 3 seconds until the unit beeps
and the indicator light flash 3 times, the filter
timer function is now reset.

Operating Guide
Control Panel
Power Button
Pressing the Power button will put the air
purifier into operating mode.
Press the power button a second time to stop
the air purifier and place it into standby mode.
Fan Speed
Press the fan speed button repeatedly to cycle
through the different speed settings.
1 –Low speed
2 –Medium speed
3 –High Speed
The corresponding fan speed indicator light will
display the current fan speed.
Lock
To lock the system, press and hold the lock
button for 3 seconds until the lock display is
illuminated.
To unlock the system, press and hold the lock
button until the lock indicator light turns off.
Sleeping Mode
Press the sleep button to put the unit into Sleep
Mode. In this mode, the fan is at its
lowest/quietest setting; all the indicators will
be off after 3 seconds to avoid disturbing your
sleep.
Timer
WIFI
Auto Mode
Filter Reset
7
8
Press the timer button to set the timed auto-off
feature. The unit can be set run between 1 and 8
hours. Continue to press the timer button to cycle
through the preselected times. The corresponding
duration will be represented by the number of
indicator lights illuminated.
Indicate configuration status of the WIFI.
In light-off mode, when pressing the other
button, the indicator lights corresponding to the
functions will be on, and go off after 3 seconds.
See the MSPure APP instructions for more
information.
Press the Auto button to set the unit at Auto
Mode. The Auto indicators light will be
illuminated. The fan speed will change based on
air quality. (See page. 9)
When the total run hours of the air purifier reach
1700 hours, the indicator will flash to indicate
the filter needs to be replaced. (See page. 9). After
the replacement is completed, press and hold the
filter button for 3 seconds until the unit beeps
and the indicator light flash 3 times, the filter
timer function is now reset.

Air quality
Color of the light
Air quality
Fan speed at auto mode
Green
great
Low speed
Yellow
General
Medium speed
Red
poor
High Speed
Note: The air purifier will take 30 seconds to detect the air quality each
time it is turned on. During this time the air quality light will be flashing
yellow. The air quality sensor detects airborne particles, but it cannot
detect gas.
Filter time
Filter life 100% remaining.
Filter life 75% remaining.
Filter life 50% remaining.
Filter life 25% remaining. Order a new filter; when
light flash, replace the filter.
Filter Replacement
Step 1
Press the power button to turn the air purifier
off and unplug the electrical outlet's power
cord.
Remove the panel of the air purifier.
Step 2
Pull out the composite filter element using the
handle at the bottom of the filter.
Clean out any remaining dust, dirt, or lint inside
the purifier using a vacuum hose or dry cloth.
DO NOT use water or liquids to clean the
purifier.
Commissioning the system
Step 1
Before using the air purifier for the first time,
open the panel and remove the composite filter.
Make sure to remove any packaging from the
filter element, or the product will not function
correctly.
Step 2
Make sure the panel is installed and locked on the
air purifier (see page 10).
Plug the air purifier power plug into an electrical
outlet; the unit will make a single beep.
The purifier should now be in standby mode.
Step 3
Push the power button once to turn the air
purifier on.
The purifier should now be in operating mode.
Warning:
For your safety, the air purifier is equipped with a safety switch. If you
open the panel when the purifier is running, the fan will stop running
and sound two beeps. The panel must be in place for the purifier to
operate.
9
6

Installation guide
System Contents
Your Membrane Solutions®MSA3S Air Purifier was carefully assembled,
packaged, and shipped complete with all the parts you should require.
Unsure about something? Is there a problem?
Please contact Membrane Solutions® via our service email
or toll-free number.
Website: www.mspurelife.com
Customer Service: [e-mail]
Toll-Free Phone: [phone]
Step 3
Remove any packing from the new filter
element and notice the inward and outward
sides of the filter element.
Refer to the new filter instructions for
airflow direction, making sure the two
handles at the top and bottom face outwards.
Step 4
Reinstall the panel and lock it into place by
pressing both sides of the panel's top edge.
After replacing the filter, plug the power
cord back into an electrical outlet. Hold
down the reset button for 3 seconds to reset
the filter timer. The indicator light will flash
three times and then go out, showing the
reset was successful. (See Page 8)
Please contact our customer service for purchase options:
Website: www.mspurelife.com
Customer Service: [e-mail]
Toll-Free Phone: [phone]
5
10
The actual lifespan of the filter may vary depending on the amount
of dust, smoke, humidity, and the concentration of other airborne
particles and vapors in the air.

Troubleshooting Guide
Problem
Possible Solution
1
The air purifier
will not turn on or
respond to the
power button
Confirm that unit is plugged into a
powered outlet.
Make sure the panel is installed and
locked on the air purifier. (see page 10)
2
Airflow is
significantly
reduced
Make sure the filter is removed from its
packaging. (see page 9)
Press the Fan Speed button to increase
fan speed.
The filter may be blocked, replace the air
filter.
3
Air Purifier makes
unusual noise
while the fan is on
Make sure the air purifier is being
operated on a firm level surface.
The filter may be blocked, replace the air
filter.
The air purifier may be damaged. Contact
Membrane Solutions®customer support.
4
Poor air
purification quality
Press the Fan Speed button to increase
fan speed.
Close doors and windows while using the
air purifier.
Make sure the air filter is removed from
its packaging. (see page 9)
Replace the filter.
5
Operating Guidelines
The following table lists the operating parameters for this product. Operating
this product outside these specifications may cause system performance issues
and may even lead to personal injury and void any warranty. Please contact
Membrane Solutions®for further advice and support.
Operating Parameters
Model
Membrane Solutions® MSA3S
Rated Voltage
120 V~60 Hz
Rated Power
44 Watts
Dimensions
7.7 inches x 13.1 inches x 21.5 inches
(195 mm x 334 mm x 545 mm)
Operating weight
13.7 lb (6.2 kg)
Filter Element type
A single composite filter element
Temperature & Humidity
Operating: 32-104 ℉ (0-40 ℃) 20-90%
Storage: 14-140 ℉ (-10-60 ℃) 20-90%
11
4

Warning & Caution
Membrane Solutions®products are designed with safety in mind.
However, personnel using this device must be familiar with any potential
dangers. All safety information detailed in this handbook should be
reviewed before installing and operating this air purifier.
·This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit
in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
·This product is not a toy; children must be supervised when using the
device. Keep packing materials out of children's reach.
·The system has been designed for indoor use only. Install the air
purifier out of direct sunlight on a flat, level, dry, and secure surface
with average ambient room temperature.
·Do not touch the power plug with wet hands. Do not use if plug or
power cord is damaged or the product is not working.
·Do not use the device in a place with heavy moisture or smoke. Please
keep the device away from flammable gas appliances such as heaters
of fireplaces.
·Clean the device and remove any dust from the power plug regularly.
Unplug the unit when cleaning, do not use strong corrosive
detergents of chemicals as they may damage the device's surface.
·Do not obstruct the air inlets or outlets on the device. Do Not wash or
reuse the composite filters –Replace with new filters.
Warnings and Cautions are provided; Failing to observe these
instructions could damage the equipment, associated parts,
surroundings, or personal injury.
Troubleshooting Guide
Problem
Possible Solution
5
Unpleasant or musty
smell coming from the
purifier
Do not use in a damp or wet
environment. If the filter becomes
damp, replace the filter and move the
air purifier to a dry area.
The carbon part of the filter may be
exhausted; replace the filter.
6
The filter indicator
light is flash.
The air filter is 100% exhausted and
requires replacement. (see page 9)
7
Only the sleep
indicator light is on,
yet the purifier is still
operating.
The air purifier is in sleep mode, push
the fan speed button to change the
operating mode, the indicates lights
will turn on again.
8
If your problem is not
listed
Please contact Membrane Solutions®
Customer Service.
9
Air Quality Indicator
always stays green,
even when the air
quality is poor.
The air quality sensor detects
airborne particles, but it cannot detect
gas or odor.
3
12