Siqura HSD62x User manual

User Manual
U s e r M a n u a l
HSD62x
Firmware Version 4.14
IP PTZ Camera with dual H.264

Page 2
Note: To ensure proper operation, please read this manual thoroughly before using the product and retain the
information for future reference.
Copyright © 2014 Siqura B.V.
All rights reserved.
HSD62x v4.14
User Manual v8 (120607-8)
AIT55MW10
Nothing from this publication may be copied, translated, reproduced, and/or published by means of printing,
photocopying, or by any other means without the prior written permission of Siqura.
Siqura reserves the right to modify specifications stated in this manual.
Brand names
Any brand names mentioned in this manual are registered trademarks of their respective owners.
Liability
Siqura accepts no liability for claims from third parties arising from improper use other than that stated in this
manual.
Although considerable care has been taken to ensure a correct and suitably comprehensive description of all
relevant product components, this manual may nonetheless contain errors and inaccuracies. We invite you to offer
your suggestions and comments by email via t.writi[email protected]. Your feedback will help us to further
improve our documentation.
How to contact us
If you have any comments or queries concerning any aspect related to the product, do not hesitate to contact:
Siqura B.V.
Zuidelijk Halfrond 4
2801 DD Gouda
The Netherlands
General : [phone]
Fax : [phone]
E-mail : [e-mail]
WWW : www.siqura.com

Page 3
Contents
1ABOUT THIS MANUAL.............................................................................................................................. 9
2SAFETY AND COMPLIANCE..................................................................................................................... 11
2.1 SAFETY ....................................................................................................................................................11
2.2 COMPLIANCE ............................................................................................................................................14
3PRODUCT DESCRIPTION ......................................................................................................................... 15
3.1 MODELS ..................................................................................................................................................15
3.2 PRODUCT OVERVIEW ..................................................................................................................................17
3.3 FEATURES SUMMARY .................................................................................................................................19
4INTERFACES ........................................................................................................................................... 21
4.1 ONVIF....................................................................................................................................................21
4.2 OSA .......................................................................................................................................................21
4.3 WEB UI...................................................................................................................................................21
4.4 MX/IP....................................................................................................................................................22
4.5 SNMP ....................................................................................................................................................22
4.6 SAP........................................................................................................................................................22
4.7 NTCIP ....................................................................................................................................................22
5MEDIA STREAMING VIA RTSP ................................................................................................................ 25
5.1 RTSP AND RTP.........................................................................................................................................25
5.2 TRANSFER VIA UDP OR TCP........................................................................................................................26
6ACCESS THE WEBPAGES ......................................................................................................................... 27
6.1 SYSTEM REQUIREMENTS..............................................................................................................................27
6.2 CONNECT VIA WEB BROWSER .......................................................................................................................27
6.3 FIND THE UNIT WITH SIQURA DEVICE MANAGER..............................................................................................27
6.4 CONNECT VIA UPNP ..................................................................................................................................29
6.5 LOG ON TO THE UNIT..................................................................................................................................29
7NAVIGATE THE WEBPAGES .................................................................................................................... 31
7.1 MENU.....................................................................................................................................................31
7.2 ACCESS CONTROL ......................................................................................................................................32
7.3 WEBPAGE ELEMENTS..................................................................................................................................32
8VIEW LIVE VIDEO VIA BROWSER ............................................................................................................ 33
8.1 ACTIVATE LIVE VIEW ..................................................................................................................................33
8.2 VIEW LIVE VIDEO .......................................................................................................................................34
8.3 USE YOUR BROWSER FOR PTZ CONTROL.........................................................................................................35
9STATUS .................................................................................................................................................. 37
9.1 VIEW STATUS INFORMATION ........................................................................................................................37
9.1.1 Stream states ...................................................................................................................................38
9.1.2 Edge recording .................................................................................................................................38
9.2 VIEW MEASUREMENTS DATA........................................................................................................................39
9.2.1 General, network, and stream measurements.................................................................................39
9.2.2 SD card size.......................................................................................................................................39
9.2.3 FTP Push ...........................................................................................................................................39
10 NETWORK .............................................................................................................................................. 41

Contents
Page 4
10.1 NETWORK SETTINGS...................................................................................................................................41
10.2 ADVANCED...............................................................................................................................................42
10.2.1 Services ........................................................................................................................................42
10.2.2 Network .......................................................................................................................................42
11 VIDEO .................................................................................................................................................... 43
11.1 VIDEO ENCODING OVERVIEW .......................................................................................................................44
11.2 GENERAL .................................................................................................................................................45
11.2.1 Video Settings ..............................................................................................................................45
11.2.2 Camera module configuration .....................................................................................................47
11.2.3 Encoder Priorities .........................................................................................................................47
11.3 ENCODER # ..............................................................................................................................................48
11.3.1 Encoder Settings ..........................................................................................................................48
11.3.1.1 Combinations of settings.........................................................................................................................50
11.3.1.2 Notes .......................................................................................................................................................51
11.3.2 Make a video connection .............................................................................................................51
11.3.3 Advanced .....................................................................................................................................53
11.3.3.1 Encoder ...................................................................................................................................................53
11.3.3.2 Stream Manager......................................................................................................................................56
11.3.3.3 Transmitter #...........................................................................................................................................57
11.3.3.4 RTSP Transmitter .....................................................................................................................................58
11.3.3.5 SAP Settings.............................................................................................................................................59
11.3.3.6 Meta data insertion.................................................................................................................................61
11.3.3.7 Notes .......................................................................................................................................................63
11.4 H.264 -1................................................................................................................................................65
11.4.1 Encoder Settings ..........................................................................................................................65
11.4.1.1 Constant Quality Mode configuration .....................................................................................................67
11.4.1.2 Profiles.....................................................................................................................................................67
11.4.1.3 Parameter value combinations ...............................................................................................................68
11.4.2 MX Transmitter Settings and making video connections.............................................................68
11.4.3 Advanced .....................................................................................................................................69
11.4.3.1 Encoder ...................................................................................................................................................69
11.4.3.2 Stream Manager, Transmitter #, RTSP Transmitter, and SAP..................................................................70
11.5 H.264 -2................................................................................................................................................71
11.5.1 Edge recording .............................................................................................................................71
11.6 LIVE VIEW ................................................................................................................................................73
11.6.1 (M)JPEG output............................................................................................................................73
11.6.2 Encoder Settings ..........................................................................................................................73
11.6.3 Advanced .....................................................................................................................................74
11.7 OSD .......................................................................................................................................................75
11.7.1 IP video server board OSD versus camera zoom block OSD .........................................................75
11.7.2 IP server board OSD facilities .......................................................................................................75
11.7.3 Text Settings.................................................................................................................................76
11.7.4 Text # ...........................................................................................................................................76
11.7.4.1 Advanced.................................................................................................................................................77
11.7.5 Graphics .......................................................................................................................................78
11.7.5.1 Advanced.................................................................................................................................................79
11.8 VMD......................................................................................................................................................80
11.8.1 VMD startup.................................................................................................................................80
11.8.2 Configure detection parameters ..................................................................................................81
11.8.3 Set the mask.................................................................................................................................82
11.8.4 VMD detection window ...............................................................................................................83
11.8.5 VMD alarm...................................................................................................................................83
11.8.6 Advanced .....................................................................................................................................83
11.9 FTP PUSH................................................................................................................................................85
11.9.1 Post JPEG images .........................................................................................................................85

Contents
Page 5
11.9.2 General.........................................................................................................................................85
11.9.3 FTP server.....................................................................................................................................86
11.9.4 Event management......................................................................................................................87
11.9.5 Monitor and troubleshoot FTP Push ............................................................................................87
11.10 IMAGE MONITOR ..................................................................................................................................88
11.10.1 Image quality check .....................................................................................................................88
11.10.2 Enable the Image Monitor ...........................................................................................................89
11.10.3 Dial legend ...................................................................................................................................90
11.10.4 Measurements configuration.......................................................................................................92
11.10.5 Region of Interest (ROI)................................................................................................................93
11.11 TAMPER DETECT ...................................................................................................................................95
11.11.1 Camera movement and scene changes .......................................................................................95
11.11.2 Enable Tamper Detect..................................................................................................................95
11.11.3 Reference images.........................................................................................................................96
11.11.3.1 Create a reference image ...................................................................................................................96
11.11.3.2 Mask the ROI ......................................................................................................................................97
11.11.3.3 Compare images .................................................................................................................................97
11.11.3.4 Delete a reference image ...................................................................................................................98
11.11.4 Position measurement .................................................................................................................98
11.11.5 Alarms..........................................................................................................................................99
11.11.5.1 Alarm examples ................................................................................................................................100
12 AUDIO.................................................................................................................................................. 101
12.1 ENABLE AUDIO ........................................................................................................................................101
12.1.1 Input Settings .............................................................................................................................102
12.1.2 Output Settings ..........................................................................................................................102
12.2 MAKE AUDIO CONNECTIONS ......................................................................................................................103
12.2.1 MX Transmitter Settings ............................................................................................................103
12.2.2 MX Receiver Settings..................................................................................................................104
12.3 ADVANCED.............................................................................................................................................104
12.3.1 Audio Input.................................................................................................................................104
12.3.2 Audio Output..............................................................................................................................104
12.3.3 Audio Encoder ............................................................................................................................105
12.3.4 Audio Decoder............................................................................................................................105
12.3.5 Transmitter # .............................................................................................................................106
12.3.6 Receiver 1...................................................................................................................................107
12.3.7 RTSP Transmitter .......................................................................................................................108
12.3.8 SAP Settings ...............................................................................................................................109
13 CC STREAMS ........................................................................................................................................ 111
13.1 CC CHANNELS,CC STATUS,AND ALARMS .....................................................................................................111
13.2 INPUT #SETTINGS ...................................................................................................................................112
13.3 MAKE CONTACT CLOSURE CONNECTIONS......................................................................................................113
13.4 ADVANCED.............................................................................................................................................113
13.4.1 Transmitter # .............................................................................................................................113
13.5 CC OUTPUT............................................................................................................................................113
14 PTZ....................................................................................................................................................... 115
14.1 ENABLE PTZ CONTROL..............................................................................................................................115
14.2 UPLOAD/REMOVE PTZ DRIVERS.................................................................................................................116
14.3 MX TRANSMITTER/MX RECEIVER SETTINGS.................................................................................................116
14.4 TCP SERVER SETTINGS .............................................................................................................................116
14.5 ADVANCED.............................................................................................................................................117
14.5.1 Transmitter 1 .............................................................................................................................117
14.5.2 Receiver 1...................................................................................................................................118

Contents
Page 6
15 SECURITY ............................................................................................................................................. 119
15.1 HTTPS..................................................................................................................................................119
15.2 CERTIFICATE/REQUEST INFORMATION .........................................................................................................120
15.3 CA-ISSUED CERTIFICATE ............................................................................................................................120
15.4 SELF-SIGNED CERTIFICATE..........................................................................................................................121
15.5 OPEN A SECURE CONNECTION ....................................................................................................................121
16 EDGE RECORDING ................................................................................................................................ 123
16.1 EDGE RECORDING BASICS ..........................................................................................................................123
16.2 MONITORING .........................................................................................................................................124
16.3 RECORDING............................................................................................................................................124
16.4 CLIPS.....................................................................................................................................................124
16.5 SD CARD................................................................................................................................................125
17 EVENT MANAGEMENT ......................................................................................................................... 127
17.1 ASSOCIATE EVENTS WITH OUTPUT FACILITIES .................................................................................................127
17.1.1 CC Stream #................................................................................................................................127
17.1.2 FTP Push.....................................................................................................................................128
18 DEVICE MANAGEMENT ........................................................................................................................ 129
18.1 GENERAL ...............................................................................................................................................129
18.1.1 Identification..............................................................................................................................129
18.1.2 Device Name ..............................................................................................................................130
18.1.3 Advanced ...................................................................................................................................130
18.1.3.1 Alarm Settings .......................................................................................................................................130
18.1.3.2 LED control ............................................................................................................................................130
18.2 LOGGING ...............................................................................................................................................131
18.2.1 Log file........................................................................................................................................131
18.2.2 Syslog settings............................................................................................................................131
18.3 SNMP ..................................................................................................................................................132
18.3.1 SNMP System Information .........................................................................................................132
18.3.2 SNMP Communities ...................................................................................................................132
18.3.3 SNMP Agent ...............................................................................................................................132
18.3.4 SNMP Traps................................................................................................................................133
18.3.5 Polling ........................................................................................................................................133
18.4 MX ......................................................................................................................................................134
18.4.1 MX/IP .........................................................................................................................................134
18.4.2 MX Notifications ........................................................................................................................134
18.5 AUTO DISCOVERY ....................................................................................................................................135
18.5.1 Advertise the HSD62x.................................................................................................................135
18.5.1.1 Note.......................................................................................................................................................135
18.6 ONVIF..................................................................................................................................................136
18.6.1 Note ...........................................................................................................................................136
18.7 FIRMWARE.............................................................................................................................................137
18.7.1 Firmware images .......................................................................................................................137
18.7.2 Current Version ..........................................................................................................................137
18.7.3 Upgrade .....................................................................................................................................137
18.7.3.1 Troubleshoot upgrade issues ................................................................................................................138
18.7.3.2 Advanced...............................................................................................................................................139
18.8 BACKUP/RESTORE ...................................................................................................................................140
18.8.1 Backup .......................................................................................................................................140
18.8.2 Restore .......................................................................................................................................140
18.9 REBOOT.................................................................................................................................................141
19 USER MANAGEMENT ........................................................................................................................... 143

Contents
Page 7
19.1 WEB ACCESS ..........................................................................................................................................143
19.1.1 Access control ............................................................................................................................143
19.1.2 Manage user accounts...............................................................................................................144
19.2 LINUX....................................................................................................................................................145
20 DATE AND TIME ................................................................................................................................... 147
20.1 DATE AND TIME.......................................................................................................................................147
20.2 SNTP SETTINGS ......................................................................................................................................148
20.3 ADVANCED.............................................................................................................................................149
21 MULTICASTING, MULTI-UNICASTING, AND PORT NUMBERS................................................................ 151
21.1 MULTICAST ............................................................................................................................................151
21.2 MULTI-UNICAST ......................................................................................................................................152
21.3 PORT NUMBERS.......................................................................................................................................152
22 ACCESSING AND NAVIGATING THE ON-SCREEN MENU ........................................................................ 153
22.1 IP VIDEO SERVER BOARD OSD AND CAMERA OSD........................................................................................153
22.2 USING THE ON-SCREEN MENU...................................................................................................................153
22.2.1 Working with the OSM from the web interface.........................................................................154
22.2.2 Using the OSM from a control keyboard....................................................................................155
22.2.3 OSM access summary ................................................................................................................156
23 CAMERA CONFIGURATION VIA THE ON-SCREEN MENU ....................................................................... 157
23.1 DISPLAYING CAMERA PARAMETERS ON SCREEN.............................................................................................158
23.2 ON-SCREEN MENU TREE ..........................................................................................................................159
23.2.1 Siqura HSD620/620PRH/622......................................................................................................159
23.2.2 Siqura HSD621PRH/626/626EXP................................................................................................163
23.3 ON-SCREEN MENU DESCRIPTION ...............................................................................................................167
23.3.1 Main Page 1 ...............................................................................................................................167
23.3.1.1 Language ...............................................................................................................................................167
23.3.1.2 Default Camera......................................................................................................................................167
23.3.1.3 Backlight Compensation........................................................................................................................168
23.3.1.4 Focus .....................................................................................................................................................168
23.3.1.5 Auto Exposure .......................................................................................................................................169
23.3.1.6 White Balance Control...........................................................................................................................170
23.3.2 Setup Menu 1 .............................................................................................................................171
23.3.2.1 Zoom Speed...........................................................................................................................................171
23.3.2.2 Max Digital Zoom ..................................................................................................................................172
23.3.2.3 Slow Shutter ..........................................................................................................................................172
23.3.2.4 DNR........................................................................................................................................................172
23.3.2.5 Image Inverse ........................................................................................................................................173
23.3.2.6 Freeze ....................................................................................................................................................173
23.3.2.7 Aperture ................................................................................................................................................173
23.3.2.8 Stabiliser (HSD621PRH/626)..................................................................................................................173
23.3.3 Setup Menu 2 .............................................................................................................................174
23.3.3.1 Flip .........................................................................................................................................................174
23.3.3.2 Angle Adjuster .......................................................................................................................................174
23.3.3.3 PT Position.............................................................................................................................................175
23.3.3.4 Speed by Zoom ......................................................................................................................................175
23.3.3.5 Auto Calibration ....................................................................................................................................175
23.3.3.6 Password ...............................................................................................................................................175
23.3.3.7 OSD Auto Close......................................................................................................................................175
23.3.3.8 System Reset .........................................................................................................................................175
23.3.4 Main Page 2 ...............................................................................................................................176
23.3.4.1 ID Display...............................................................................................................................................176
23.3.4.2 Title Display ...........................................................................................................................................176
23.3.4.3 Title Setting ...........................................................................................................................................176

Contents
Page 8
23.3.4.4 Preset ....................................................................................................................................................177
23.3.4.5 Sequence ...............................................................................................................................................178
23.3.4.6 Autopan.................................................................................................................................................179
23.3.4.7 Cruise.....................................................................................................................................................180
23.3.4.8 Home Setting.........................................................................................................................................181
23.3.5 Main Page 3 ...............................................................................................................................182
23.3.5.1 IR Function.............................................................................................................................................182
23.3.5.2 Alarm Setting.........................................................................................................................................183
23.3.5.3 Alarm Detect .........................................................................................................................................184
23.3.5.4 WDR Function........................................................................................................................................185
23.3.5.5 Privacy Mask..........................................................................................................................................185
23.3.5.6 Time Setting...........................................................................................................................................188
23.3.5.7 Schedule ................................................................................................................................................188
23.3.5.8 Exit.........................................................................................................................................................188
APPENDIX: HOT KEY DEFINITIONS ................................................................................................................ 189
APPENDIX: ENABLE JAVASCRIPT................................................................................................................... 191
APPENDIX: ENABLE UPNP IN WINDOWS 7 ................................................................................................... 193
APPENDIX: INSTALL A VIDEO PLAYER ........................................................................................................... 195
DOWNLOAD VIDEO PLAYER SOFTWARE ......................................................................................................................195
INSTALL QUICKTIME..............................................................................................................................................195
INSTALL VLC........................................................................................................................................................196
APPENDIX: NTCIP CONFIGURATION ............................................................................................................. 197
SUPPORTED CONFORMANCE GROUPS........................................................................................................................197
Configuration...............................................................................................................................................197
CCTV configuration......................................................................................................................................198
Motion control.............................................................................................................................................198
SNMP MIB........................................................................................................................................................198

Page 9
C h a p t e r 1
1About this manual
What this manual covers
This manual applies to the HSD62x, Siqura's IP PTZ camera with dual H.264.
It describes in detail:
How to communicate with the unit
How to operate the unit
How to configure the unit's settings
Instructions for camera installation and establishing connections can be found in the separate
Quick Start Guide and Installation Manual provided with each HSD62x series model.
Who should read this manual
This manual is intended for technicians and operators involved in the configuration and operation
of HSD62x cameras.
What you should already know
To work with a HSD62x a technician or operator should have adequate knowledge and skills in
the following fields:
Basic understanding of camera technologies
CCTV systems and components
Ethernet network technologies and Internet Protocol (IP)
Windows environments
Web browsers
Video, audio, and contact closure transmissions
Video compressions methods
Before you start the installation
We advise you to read and observe all instructions and warnings in this manual before you
proceed. Retain this manual with the original bill of sale for future reference and warranty
service. When you unpack your product, check for missing or damaged items. If any item is
missing, or if damage is evident, do not install or operate this product. Contact your supplier for
assistance.
Why specifications may change
At Siqura, we are committed to delivering high-quality products and services. The information
given in this manual was current when published. As we are relentlessly working to improve our
products and user experience, all specifications are subject to change without notice.
We like to hear from you!
Customer satisfaction is our first priority. We welcome and value your opinion about our products
and services. Should you detect errors or inaccuracies in this manual, we would be grateful if you
would inform us. We invite you to offer your suggestions and comments via
[e-mail]. Your feedback helps us to further improve our documentation.

HSD62x
Page 10
Acknowledgement
Siqura units use the open-source Free Type font-rendering library.

Page 11
C h a p t e r 2
2Safety and compliance
This chapter presents the HSD62x safety instructions and compliance information.
In This Chapter
Safety .............................................................................. 11
Compliance ....................................................................... 14
2.1 Safety
The safety information contained in this section, and on other pages of this manual, must be
observed whenever this unit is operated, serviced, or repaired. Failure to comply with any
precaution, warning, or instruction noted in the manual is in violation of the standards of design,
manufacture, and intended use of the module. Siqura assumes no liability for the customer's
failure to comply with any of these safety requirements.
Trained personnel
Installation, adjustment, maintenance, and repair of this equipment are to be performed by
trained personnel aware of the hazards involved. For correct and safe use of the equipment and
in order to keep the equipment in a safe condition, it is essential that both operating and
servicing personnel follow standard safety procedures in addition to the safety precautions and
warnings specified in this manual, and that this unit be installed in locations accessible to trained
service personnel only.
Safety requirements
The equipment described in this manual has been designed and tested according to the
UL/IEC/EN 60950-1 safety requirements. See the CE Declaration of Conformity for compliance
information.
Warning: If there is any doubt regarding the safety of the equipment, do not put it into
operation.
This might be the case when the equipment shows physical damage or is stressed beyond
tolerable limits (for example, during storage and transportation).
Important: Before opening the equipment, disconnect it from all power sources.
The equipment must be powered by a SELV*power supply. This is equivalent to a Limited Power
source (LPS, see UL/IEC/EN 60950-1 clause 2.5) or a "NEC Class 2" power supply. When this
module is operated in extremely elevated temperature conditions, it is possible for internal and
external metal surfaces to become extremely hot.
*SELV: conforming to IEC 60950-1, <60 Vdc output, output voltage galvanically isolated from mains. All
power supplies or power supply cabinets available from Siqura comply with these SELV requirements.

HSD62x
Page 12
Power source and temperature ratings
Verify that the power source is appropriate before you plug in and operate the unit. Use the unit
under conditions where the temperature remains within the range given in the Technical
Specifications of this product.
Optical safety
The following optical safety information applies to HSD62x models with SFP interface only.
This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007. This optical equipment contains Class 1M lasers or LEDs and
has been designed and tested to meet IEC 60825-1:1993+A1+A2 and IEC 60825-2:2004 safety
class 1M requirements.
Warning: Optical equipment presents potential hazards to testing and servicing personnel, owing
to high levels of optical radiation.
When using magnifying optical instruments, avoid looking directly into the output of an
operating transmitter or into the end of a fiber connected to an operating transmitter, or there
will be a risk of permanent eye damage. Precautions should be taken to prevent exposure to
optical radiation when the unit is removed from its enclosure or when the fiber is disconnected
from the unit. The optical radiation is invisible to the eye.
Use of controls or adjustments or procedures other than those specified herein may result in
hazardous radiation exposure.
The installer is responsible for ensuring that the label depicted below (background: yellow;
border and text: black) is present in the restricted locations where this equipment is installed.
EMC
This device has been tested and found to meet the CE regulations relating to EMC and complies
with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. These limits are designed to provide
reasonable protection against interference to radio communications in any installation. The
equipment generates, uses, and can radiate radio frequency energy; improper use or special
circumstances may cause interference to other equipment or a performance decrease due to
interference radiated by other equipment. In such cases, the user will have to take appropriate
measures to reduce such interactions between this and other equipment.
Any interruption of the shielding inside or outside the equipment could make the equipment
more prone to fail EMC requirements.
Non-video signal lines must use appropriate shielded Cat 5 cabling (S-FTP), or at least an
equivalent. Ensure that all electrically connected components are carefully earthed and
protected against surges (high voltage transients caused by switching or lightning).
ESD
Electrostatic discharge (ESD) can damage or destroy electronic components. Proper precautions
should be taken against ESD when opening the equipment.

Safety and compliance
Page 13
Handle the camera carefully
Do not abuse the camera. Avoid bumping and shaking. The camera can be damaged by improper
handling or storage.
Do not disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no user serviceable parts
inside. Consult technical support if a camera is suspected of malfunctioning.
Do not use strong or abrasive detergents to clean the camera
Use a dry cloth to clean the camera when it is dirty. If the dirt is hard to remove, use a mild
detergent and wipe gently. To clean the lens, use lens tissue or a cotton tipped applicator and
ethanol. Do not clean the lens with strong detergents.
Never face the camera towards the sun
Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the
sun or other extremely bright objects, as this can damage the camera.
Do not block the cooling vent
This camera has a cooling fan inside. Blocking the cooling holes may lead to overheating and
cause malfunction. Overheating is not covered by warranty.
Do not expose indoor models to moisture
The indoor camera is designed for indoor use or use in locations where it is protected from rain
and moisture. Turn the power off immediately if the camera is wet and ask a qualified technician
for servicing. Moisture can damage the camera and also create the danger of electric shock.
RoHS statement
Global concerns over the health and environmental risks associated with the use
of certain environmentally-sensitive materials in electronic products have led
the European Union (EU) to enact the Directive on the Restriction of the use of
certain Hazardous Substances (RoHS) (2002/95/EC). Siqura offers products
that comply with the EU’s RoHS Directive. The full version of the Siqura RoHS
statement can be viewed at www.siqura.com.
Product disposal
The unit contains valuable materials which qualify for recycling. In the interest
of protecting the natural environment, properly recycling the unit at the end of
its service life is imperative.
When processing the printed circuit board, dismantling the lithium battery calls
for special attention. This kind of battery, a button cell type, contains so little
lithium, that it will never be classified as reactive hazardous waste. It is safe for
normal disposal, as required for batteries by your local authority.

HSD62x
Page 14
2.2 Compliance

Page 15
C h a p t e r 3
3Product Description
The HSD62x cameras are networked high-speed PTZ dome cameras designed to deliver superb
performance and durability with an intelligent and stylish housing suitable in any security and
surveillance installation. This chapter introduces the individual camera models and their
features.
In This Chapter
Models.............................................................................. 15
Product overview ............................................................... 17
3.1 Models
The HSD62x series provides six IP PTZ camera models with dual H.264.
Siqura HSD620
Quad stream support: dual H.264, MPEG-2, MPEG-4, and MJPEG
26x Optical zoom; 12x digital zoom
Day/Night, Back Light Compensation, Wide Dynamic Range
400°/second preset targeting
360° endless panning
256 presets; 8 programmable cruises
8 alarm in; 1 output
Two-way audio
24 privacy masks
Analogue output
Optical output option
Siqura HSD620PRH
Quad stream support: dual H.264, MPEG-2, MPEG-4, and MJPEG
26x Optical zoom/12x digital zoom
Day/Night with IR-cut filter
Backlight compensation
400°/second preset targeting
256 presets/8 programmable cruises
Compass, azimuth and elevation OSD
24 privacy masks
Pressurised to 7psi; able to hold pressure for up to 1 year
Low pressure sensor, Shrader and pressure relief valves standard
IP 67 ingress protection

HSD62x
Page 16
Siqura HSD621PRH
Quad stream support: dual H.264, MPEG-2, MPEG-4, and MJPEG
35x Optical zoom/12x digital zoom
Day/Night with IR-cut filter
Backlight compensation
400°/second preset targeting
256 presets/8 programmable cruises
Compass, azimuth and elevation OSD
8 privacy masks
Pressurised to 7psi; able to hold pressure for up to 1 year
Low pressure sensor, Shrader and pressure relief valves standard
IP 67 ingress protection
Siqura HSD622
Quad stream support: dual H.264, MPEG-2, MPEG-4, and MJPEG
26x Optical zoom; 12x digital zoom
Day/Night, Backlight compensation, Wide Dynamic Range
400°/second preset targeting
360° endless panning
256 presets; 8 programmable cruises
8 alarm in; 1 output
Two-way audio
24 privacy masks
Analogue output
Optical output option
Siqura HSD626
Quad stream support: dual H.264, MPEG-2, MPEG-4, and MJPEG
35x optical zoom; 12x digital zoom
Day/Night, Backlight compensation, Wide Dynamic Range
Electronic Image Stabilisation
400°/second preset targeting
360° endless panning
256 presets; 8 programmable cruises
8 alarm in; 1 output
Two-way audio
8 Privacy Masks
Analogue output
Optical output option
Siqura HSD626EXP
Quad stream support: dual H.264, MPEG-2, MPEG-4, and MJPEG
35x optical zoom; 12x digital zoom
Day/Night, Backlight compensation, Wide Dynamic Range
Electronic Image Stabilisation
400°/second preset targeting
360° endless panning
256 presets; 8 programmable cruises
8 alarm in; 1 output
Two-way audio
8 Privacy Masks
Analogue output
Optical output option
IP67 Ingress protection
ATEX approved for gas and dust
Fan and heater

Product Description
Page 17
3.2 Product overview
General
Siqura HSD62x series cameras are high-speed IP PTZ dome cameras with a built-in multicodec
and multistreaming video server.
High-speed dome
The HSD62x has a 26x (HSD620/620PRH/622) or 35x (HSD621PRH/626/626EXP) autofocus
zoom lens with 12x digital zoom. The lens can move in almost any direction offering a wide view
without missing any details. The dome provides variable pan/tilt speeds ranging from a fast
patrol of 400° per second to a slow ramble of 0.5° per second with +/- 0.1° pan accuracy for fast
and accurate tracking. 360° endless rotation and -10°~190° tilt travel allow for the tracking of
objects passing directly underneath the dome. Up to 256 preset points can be programmed for
precise location of target areas; users can also define eight sequence routes, four auto pan
routes, and eight cruise routes for the camera to operate automatically.
Multicodec and multistreaming
The HSD62x is capable of streaming 2x H.264 at full frame rate. It can also stream 2x MPEG-2,
MPEG-4, or MJPEG simultaneously. Each stream is optimised for its purpose: high-quality H.264
or MPEG-2 for live viewing, low-bandwidth MPEG-4 for storage, or easy-to-decode MJPEG for
web applications and remote devices.
Up to twenty streams can be retrieved using RTSP. It is also possible to use the Session
Announcement Protocol (SAP) to transmit MPEG-2/-4/MJPEG and H.264 streams to multicast
destinations. The unit also has a Live View encoder that can convert the video input signal to
MJPEG format for streaming to web applications or remote devices using the HTTP pull method.
Using the MX protocol, a total of twelve copies –three per independent MPEG-2/4, MJPEG, or
H.264 video stream –can be transmitted to different unicast and/or multicast destinations. The
HSD62x supports source-specific multicast (SSM).
Picture enhancement
Almost every analogue camera offers an interlaced signal (PAL or NTSC). On digital computer
monitors, this causes severe artefacts, such as comb edges on moving objects. To remove these
artefacts the video signal has to be deinterlaced. This can be done in the monitor, but also at the
beginning –at the encoder side. The HSD62x is fitted with a motion adaptive deinterlacer
(M.A.D.). Siqura’s M.A.D removes the interlacing artefacts on the moving objects only to
preserve the vertical resolution of the image. In addition, the deinterlaced image is much easier
to encode, saving bits for streaming and storage.
Edge recording
The HSD62x offers edge recording when the connection with the NVR is lost. The recorded
images are available as AVI and can easily be downloaded from the device. The recordings are
stored on a single µSDHC card with a maximum capacity of 32 GB.
ONVIF and Open Streaming Architecture (OSA)
The Siqura HSD62x supports both the international ONVIF standard and Siqura OSA for remote
control, configuration, video switching, and streaming. The HSD62x has been approved for
ONVIF Profile S for streaming, PTZ, and I/O. Siqura’s OSA is a comprehensive HTTP RTSP based
API, which gives access (next to ONVIF) to all controls and makes full integration easy.

HSD62x
Page 18
Video Motion Detection (VMD)
The HSD62x is fitted with a motion detector, which raises an event when a certain amount of
motion is detected in a predefined area in the image. The motion detector runs real-time on the
live images. The detection itself is based on ‘averaged pixel change’. The region of interest (ROI)
is obtained by masking the parts of the image of less or no interest, such as trees or a fountain
which would otherwise trigger false events. The mask can be drawn freely over the image.
Image quality monitor and tampering alarm
When the image from the camera becomes too poor, an image quality alert is raised. The built-in
Image Quality Monitor continuously monitors the camera image on contrast, exposure,
sharpness, and noise. In addition, the built-in Tamper Detector monitors changes in the
camera’s position or field of view. The instant a camera’s position is changed a tamper detect
alert is raised.
FTP push
Upon an event, the HSD62x can push a JPG image to one or two FTP servers. The event can be
triggered externally by VMD, the Image Monitor, or Tamper Detect. The HSD62x can also
periodically upload images to the remote server(s).
Web interface
Configuration, management, and live viewing are simplified by the access-controlled web
interface. Full in-band control is available through Siqura Device Manager, Siqura’s MX™
Configuration Tool Kit, and the HTTP API. The HSD62x is field-upgradeable.
Audio and I/O channels
Combining streaming video with duplex audio and I/O channels over IP, the HSD62x provides all
the interfaces necessary for any CCTV application (CD-quality stereo audio, lip-sync audio, PTZ
control, alarm contacts, etc.). The balanced audio inputs/outputs are suitable for all industrial
audio systems. Siqura HSD62x series cameras provide eight alarm inputs and one relay alarm
output. The user can select one or more of these alarm inputs to be propagated over an IP
network to a remote video management system (VMS). The alarm output can also be remotely
activated by a VMS.
Image stabiliser
The HSD621PRH and HSD626 models have a built-in image stabiliser to prevent vibrations from
disrupting a camera view or footage, such as those caused by wind in pole-mount installations.
Superior protection
The HSD620PRH and HSD621PRH models have an IP67 ingress rating and the housing is
constructed of materials designed to withstand intense levels of solar heat (945VA UV
protected). Pressurising the housing, particularly with inert nitrogen gas, prevents moisture,
pollution, and dust from damaging the camera.
The HSD626EXP also has an IP67 ingress rating. The robust construction of the HSD626EXP
guarantees the safety of your facility even if the camera should come into contact with
hazardous material. Its fully integrated stainless steel housing and mounting bracket protect this
Siqura camera in exceptionally taxing conditions, including offshore installations, where
corrosion is a constant threat. The camera housing is manufactured completely from Stainless
Steel 316 which is ideally suited for use within the offshore and onshore environments. Stainless
Steel screws and mounting bracket for additional wall or pole mount are incorporated ensuring a
totally corrosion free unit.

Product Description
Page 19
Analogue output
With its analogue output, the hybrid HSD62x solution can provide local video for a public view
monitor or local DVR.
Fiber interface accessory
A fiber option is available for direct connection of fiber to the dome via a flexible SFP interface.
The XSNet™ range of SFP modules, with options for both single mode and multimode are
available. The SFP interface is built into the dome itself so a wide range of mounting options is
available.
Reliability
Dependability and high reliability are key factors in this dome's design cycle. Siqura HSD62x
cameras are assembled with meticulous care and thorough testing at our ISO 9001-compliant
factory.
3.3 Features Summary
Precise and Accurate Dome Performance
Auto Calibration
Preset accuracy of +/- 0.1°
Preset speed up to 400°/sec
Proportional Pan & Tilt Speed
Preset Position/Sequence/Auto-Pan/Cruise
Dynamic Dome Applications
Multilanguage OSD
Support for multiple IP video streams (H.264, MPEG-2, MPEG-4, and MJPEG compression)
Support for 2-way audio
Remote PTZ control using the Pelco D protocol over IP
Supports monitoring using SNMP
Supports web-based configuration
8, 16, or 24 masking zones (model specific)
8 alarm inputs, 1 alarm output; support for remote streaming of alarm signals
Video Motion Detection
Flexible indoor/outdoor mountings
Weather-resistant housing and sunshield (outdoor models)
Pressurised housing (PRH models)
Stainless Steel housing (HSD626EXP)
Superior Camera Image Quality
Minimum illumination 0.1 lux, 0.01 Lux (B/W)
Digital Slow Shutter
Electronic Shutter
Wide Dynamic Range
Auto White Balance
Backlight Compensation
Auto Exposure
Image Inverse
Electronic Image Stabiliser (model specific)
Removable IR-Cut Filter