Sister Bay Laguna 29-3 User manual

CARE & MAINTENANCE: To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners or ask your Sales Representative about
Sister Bay Furniture Cleaner.Please contact our Customer Service Department for assembly assistance, questions or replacement parts at [phone] or email
[email protected]. Our Customer Service Department is available Monday-Friday 8:30 a.m. to 4:30 P.m. CST
2
HDPE
WARNING:
Using power tools may result in overtourquing screws causing threads to strip.
We are not responsible for replacements on parts where powertools where used.
HARDWARE:
PARTS:
16x
0-4354
1/4 x2.5"
8x
0-5285
1/4 -20x2.5"
8x
0-2980
8x
0-3016
4x
0-3017
7/16 Socket Head Wrench
(NOT INCLUDED)
7/16 Wrench
(NOT INCLUDED)
1x
Allen Wrench
1x
29 Top
2x
29-3 Leg Assem
1x
29 H-Frame
2x
29 Leg Brace
MODEL No: 29-3
Laguna
Collection
48" Bar Table.

1 2
A
DETAIL A
0-3016
0-3017
0-2980
Lay tabletop flat on cardboard or another flat surface to avoid scratching. A. Place leg assembly [1x] onto the tabletop frame, aligning leg slots with holes in the A.
frame.
Insert [4x] bolts with [4x] washers through leg slots and frame holes. (DETAIL A) B.
Fasten [4x] bolts with washer, lock washer, and nut. C.
Tighten with socket head wrench (not included). D.
0-3017
0-5285
MODEL No: 29-3
Laguna
Collection
48" Bar Table.

3 4
B
DETAIL B
0-4354
C
DETAIL C
Insert H-Frame [1x] into each slot on legs. A.
Slide screws [8x] through holes in legs and tighten using the allen wrench (included) B.
until H-Frame is no longer sagging. Leave the screws slightly loose for tightening
later. (DETAIL B)
Repeat steps A and B for each Leg Brace [2x]. C.
Place the other leg assembly [1x] onto the tabletop frame and insert the H-Frame A.
and the Leg Braces into the slots.
Insert [4x] bolts with [4x] washers through leg slots and frame holes. (DETAIL C) B.
Fasten [4x] bolts with washer, lock washer, and nut. C.
Tighten with wrench and socket head wrench (not included). D.
0-2980
0-3016
0-3017
0-3017
0-5285
MODEL No: 29-3
Laguna
Collection
48" Bar Table.

5
D
DETAIL D
Slide screws [8x] through holes in legs and tighten using the allen wrench (included). A.
(DETAIL D)
Use the allen wrench to tighten the screws from step 3. B.
0-4354
MODEL No: 29-3
Laguna
Collection
48" Bar Table.

Final Step: Stand back, nod, and think, "Yep, I did awesome!"
MODEL No: 29-3
Laguna
Collection
48" Bar Table.