Sister Bay Milano Dining Table MMIL-DT User manual

Hardware and Parts
(8)
1 - Attach part ( E ) , Table Leg to part ( D ), table Top , as shown in Figure 1, see detail 1 using ( 8 ) lag screws ( A )
2 for each leg, tighten screws using an allen wrench. Follow the same instructions for the remaining legs.
Do not use
any hand drill
on this product
Assembly Instructions
ALLEN WRENCH
( included )
B
Figure 1
You will also need a phillips-head screwdriver
( not included )
(8)
C
(8)
A
1.25
( Table Leg )
2.75
2.00
A
( Detail 1 )
A
E
D
( Table Leg )
( Table Top
Assembly )
Item No: MMIL-DT
Milano Dining Table
Assembly Instructions
Item No: MMIL-DT44
Milano 44" Dining Table
E
( Table Top Assembly )
D

Figure 2
2 - Attach part ( E ) , Table Leg to part ( D ), table Top , as shown in Figure 2, see detail 2 using ( 8 ) of
screw ( B ) 2 for each leg, tighten screws using a phillips-head screwdriver. Follow the same instructions
for the remaining legs.
E
D
B
B
Figure 3
3 - Attach part ( E ) , Table Leg to part ( D ), table Top , as shown in Figure 3, see detail 3 using ( 8 ) of
screw ( C ) 2 for each leg, tighten screws using a phillips-head screwdriver. Follow the same instructions
for the remaining legs.
E
C
D
( Detail 2 )
C
( Table Leg )
( Table Top
Assembly )
( Table Leg )
( Table Top Assembly )
( Detail 3 )
CARE AND MAINTENANCE
To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners
or ask your Sales Representative about Sister Bay Furniture Cleaner.
Please contact our Customer Service Department for assembly assistance, questions or replacement parts at 1-866-947-7632
or email [email protected]. Our Customer Service Department is available Monday - Friday from 8:30 a.m. to 4:30 p.m. EST