Sister Bay Napa 35-2 User manual

WARNING:
Using power tools may result in overtourquing screws causing threads to strip.
We are not responsible for replacements on parts where powertools where used.
CARE & MAINTENANCE: To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners or ask your Sales Representative about
Sister Bay Furniture Cleaner.Please contact our Customer Service Department for assembly assistance, questions or replacement parts at [phone] or email
[email protected]. Our Customer Service Department is available Monday-Friday 8:30 a.m. to 4:30 P.m. CST
2
HDPE
HARDWARE:
PARTS:
1x
35 Top
8x
0-5285
1/4 -20x2.5"
16x
0-3017
8x
0-3016
8x
0-2980
20x
0-2993
1/4 x2.75"
7/16 Wrench
(NOT INCLUDED)
7/16 Socket Head Wrench
(NOT INCLUDED)
1x
Allen Wrench
2x
35-2 Leg Asm
1x
35 Leaf
2x
35 Rail F&B
2x
35 Rail Lower
F&B
1x
35 Cross Brace
MODEL No: 35-2
Napa
Collection
Counter Extension Table.

1 2
A
DETAIL A
0-3017
0-3016
0-2980
0-3017
0-5285
Lay table top on cardboard or other flat surface to avoid scratches on surface. A.
Place Leg Asm on frame lining up slots with holes in frame. A.
Insert [4x] bolts w/ washers through frame and legs slots (DETAIL A). B.
Fasten [4x] bolts with washer, lock washer, and nut. C.
Tighten with wrench/socket wrench (not included). D.
MODEL No: 35-2
Napa
Collection
Counter Extension Table.

3 4
B
DETAIL B
C
NOTE:
The Part With Holes In
The Side Are Closest
To Table Top.
DETAIL C
0-2993
Place Leg Asm on frame lining up slots with holes in frame. A.
Insert [4x] bolts w/ washers through frame and legs slots (DETAIL B). B.
Fasten [4x] bolts with washer, lock washer, and nut. C.
Tighten with wrench/socket wrench (not included). D.
Insert [1x] 35 Rail F&B between legs closest to the table top, and align pilot holes A.
with holes in leg.
Fasten one side into place with [2x] screws though leg into rail (DETAIL C). B.
Fasten other side of rail to leg with [2x] screws through leg into rail. C.
Repeat steps 4A-4C for the other rail. D.
Insert [1x] 35 Rail Lower F&B bedtween legs closest to the table feet, and align E.
pilot holes with holes in leg.
Repeat steps 4B-4D to fasten rails into place. F.
MODEL No: 35-2
Napa
Collection
Counter Extension Table.

5 FINAL STEP
D
DETAIL D
Leaf Storage
Full Extension
Insert 35 Cross Brace between rails and align pilot holes with holes in rails. A.
Important that the boards sticking out on the brace point twards the tabletop.
Fasten into place with [2x] screws though rail into brace (DETAIL D). B.
Fasten other side of brace to rail with [2x] screws through rail into brace. C.
Final Step:
Start planning a gathering so you have an excuse to
slide the table into full extension mode.
MODEL No: 35-2
Napa
Collection
Counter Extension Table.