Sister Bay Hudson 12-1 User manual

WARNING:
Using power tools may result in overtourquing screws causing threads to strip.
We are not responsible for replacements on parts where powertools where used.
CARE & MAINTENANCE: To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners or ask your Sales Representative about
Sister Bay Furniture Cleaner.Please contact our Customer Service Department for assembly assistance, questions or replacement parts at [phone] or email
[email protected]. Our Customer Service Department is available Monday-Friday 8:30 a.m. to 4:30 P.m. CST
2
HDPE
HARDWARE:
PARTS:
1x
12 Seat
1x
12-1 Back
1x
12-1 Front
2x
12 Rail Side Lower
16x
0-5235
#8x1.5"
6x
0-5222
#8x1.5"
Multi-Bit Screwdriver
(Not Included)
1x
R2 SQ Bit
MODEL No: 12-1
Hudson
Collection
Dining Side Chair.

1 2
A
DETAIL A
0-5235
0-5222
Lay Back Assembly on cardboard or other flat surface to avoide scratches on A.
surface.
Set seat assembly on back assembly A.
Fasten seat to leg with [2x] Bugle head screws on each side. (DETAIL A) B.
Fasten back seat slat with [3x] panhead screws. C.
MODEL No: 12-1
Hudson
Collection
Dining Side Chair.

3 4
B
C
D
DETAIL B
0-5235
DETAIL C
0-5235
0-5222
DETAIL D
0-5235
Set Rail Side Lower against back rail and along leg aligning holes. A.
Fasten into place with [2x] 0-5235 Screws (DETAIL B). B.
Repeat steps 3A-3B for the other Rail Side Lower. C.
Set Front on Seat and Rail Side Lowers, aligning holes A.
Fasten into seat and rails with [4x] 0-5235 screws (DETAIL C & D). B.
Repeat step 4B for the other side C.
Fasten Front into Seat slat with [3x] 0-5222 screws (DETAIL C). D.
MODEL No: 12-1
Hudson
Collection
Dining Side Chair.

Final Step:
Make nachos (Optional, but recommended.)
Sit on chair and enjoy a break!
MODEL No: 12-1
Hudson
Collection
Dining Side Chair.